Safety Recalls & Notices
We found 39 safety recalls for the 2014 RAM 2500. Recalls are sourced from both NHTSA (US) and Transport Canada databases. Contact your authorized RAM dealer to schedule free repairs.
Issue: On certain vehicles, the tire and loading information label does not list that there is no spare tire in both official languages. The label reads as "NONE" when it should read as "NONE / AUCUN". Canadian regulations require the information to be listed on the label in both English and French. Safety Risk: This error does not affect vehicle safety. Corrective Actions: This is not a recall. The company has corrected the tire and loading information label for all new vehicles.
Issue: This recall is for certain replacement parts for use on Ram Heavy Duty trucks that were sold by dealer parts departments. This recall is not being conducted under the requirements of the Motor Vehicle Safety Act. If the outboard steering linkage jam nut is not welded according to the Dealer Service Instructions for safety recall V06, it could loosen and allow one end of the drag link to separate from the adjuster sleeve. A drag link separation can result in a loss of steering control. The following 4x4 style steering system parts are included in this recall: Drag Link Assembly (Part # 68369907AA) Jam Nut (Part # 06510749AA and Part # 06510750AA) Drag Link Outer (Part # 68111301AA) Drag Link Adjuster (Part #68111302AA) Drag Link Inner (Part # 68111304AA) Safety Risk: A loss of steering control could increase the risk of a crash. Corrective Actions: FCA Canada will notify potential owners using dealer sales records. Owners will be instructed to take their vehicle to a dealer to inspect the drag link assembly. If the drag link is not welded but the jam nuts are properly tightened, the nuts will be welded to the adjuster sleeve. If the nuts are not properly tightened, the drag link assembly will be assessed for replacement. If a component or assembly is returned, FCA will reimburse the customer.
Issue: On certain trucks equipped with a power locking tailgate, the tailgate may open while driving. If this occurs, cargo that is not secured could fall out of the truck bed and onto the road. Note: This is an expansion of recall U74 (Transport Canada recall 2018-398). Safety Risk: Cargo that falls from the truck bed could create a road hazard for others. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to a dealer to modify the tailgate locking mechanism. Note: This recall supersedes recall 2019-221
Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
Issue: On certain trucks, a nut in the steering system could loosen and cause a loss of steering control. This problem affects trucks equipped with a 4x4 style steering system. Safety Risk: A loss of steering control would increase the risk of a crash. Corrective Actions: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to inspect the outboard steering linkage jam nut. If the nut is properly tightened, it will be welded to the adjuster sleeve. If the nut is not properly tightened, the drag link assembly will be replaced.
On certain vehicles, an electronic fault may create a situation where the cruise control cannot be deactivated. If this occurs and the driver does not apply the brakes or shift the transmission to neutral, the vehicle could maintain speed or accelerate without warning, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the Powertrain Control Module (PCM) software and perform an update as necessary. Note: In the interim, owners are advised not to use the cruise control until the vehicle is repaired.
FCA Canada has determined that some Mopar gooseneck trailer hitch ball kits may not fully seat and lock into the truck hardware as intended. This can be caused by dirt and/or debris accumulation on top of the gooseneck ball mount, in the mounting hole and/or tolerance stack-up. If this occurs, the gooseneck ball may appear to be locked in place when it is not. If the gooseneck ball is not locked in place, under certain driving conditions it may detach from the truck. Affected parts are the Mopar 2 5/16‘’ Gooseneck Ball Kit part number 82213631 and Mopar 3” Gooseneck Ball Kit part number 82213632. Correction: FCA Canada will conduct a voluntary field action on all affected parts. The remedy for this condition is currently under development. Note: This field action is not being conducted under the requirements of the Motor Vehicle Safety Act.
On certain vehicles equipped with the Roadside Emergency Kit containing a Kidde fire extinguishers with black plastic handles and valves, the fire extinguishers may become clogged or require excessive force to activate. Also, the nozzle may detach from the valve assembly with enough force that it could cause injury, and fail to discharge. In case of fire, failure of the extinguisher to function could result in injury and/or property damage. Correction: Dealers will replace the suspect Kidde fire extinguisher with a new Kidde fire extinguisher with a steel nozzle. For more information about recalled fire extinguishers, please visit <a href="https://inmarmarketaction.com/kidde/Kidde284CA/">www.kidde.com</a>.
On certain vehicles equipped with a steering column gear shifter, the brake transmission shift interlock (BTSI) may become inoperative. This could allow the steering column gear shifter lever to be shifted out of the PARK (P) position without depressing the service brake pedal or having the key in the ignition, which could result in unintended vehicle movement, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect and replace the BTSI as necessary. The Body Control Module (BCM) will also be updated.
On certain vehicles equipped with 6.7 litre diesel engines, the water pump could fail. This could result in an underhood fire causing injury and/or property damage. Correction: Dealers will replace the water pump with a new one.
Requires attention
Common questions about recalls for this vehicle
Compare recall history with competitors and alternatives to the 2014 RAM 2500.