Toyota · 2016–2025
RAV4 Hybrid Recalls
8 known recalls affecting the Toyota RAV4 Hybrid (2016–2025). Enter your VIN to check if your specific vehicle is affected, or browse by model year below.
Toyota RAV4 Hybrid Recalls
Summary
Issue: On certain vehicles, a sensor for the occupant classification system (OCS) may not have been manufactured properly. As a result, the sensor could short circuit and cause the airbag system to turn off the passenger-front airbag even when a passenger is seated. Note: This problem would cause a warning message to display on the instrument panel and the airbag indicator light would display "passenger airbag off". Safety Risk: An airbag that is turned off could increase the risk of injury to a passenger in a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the OCS sensor.
Summary
Issue: Under certain conditions, the vehicle stability control (VSC) system may not switch on when the ignition is restarted. This can happen if the driver manually turns off the VSC, depresses the brake pedal, and then turns off and restarts the vehicle while continuously depressing the brake pedal. Canadian regulations require the stability control system to be active each time that you start the vehicle. Safety Risk: A stability control system that is switched off could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your vehicle to a dealer to update the skid control ECU software.
Summary
Issue: This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: This recall only affects the following block heater/cord part numbers: C014003034 PK5A408J09 PU14000904 C014003151 PK5A408J13 PU14000905 C014000885 PK5A489J11 PU14000907 C014000888 PK5A489J22 PU14000909 C014000907 PK5A410H00 PU14000911 C014100904 PU14000900 PU14000913 C014100907 PU14000901 PU14003571 C014100911 PU14000902 PK5A489J14 PK5A408J05 PU14000903 Safety Risk: Engine block heater wiring that overheats or melts could create the risk of a fire. Corrective Actions: Toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.
Summary
Issue: On certain vehicles, the steering column may have been damaged during assembly. As a result, the steering column could move when the driver-front airbag inflates. This could cause reduced protection for the driver in a crash. Safety Risk: Reduced occupant protection could lead to increased injuries in a crash. Corrective Actions: Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to replace the steering column.
Summary
Issue: On certain vehicles equipped with a 2.5-L 4-cylinder engine, the engine block may be porous. As a result, the engine block could crack and cause internal or external coolant leaks. This could cause engine overheating or internal engine damage and result in an engine failure. For non-hybrid vehicles, this could also result in a sudden loss of engine power while driving. Note: This problem may lead to engine noise, smoke, cause warning lights to turn on and/or cause an audible chime to sound before an engine failure. Safety Risk: A sudden loss of engine power could increase the risk of a crash. Additionally, an engine failure could create the risk of a fire. Corrective Actions: The company will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the engine block casting serial number. If the serial number is within the identified range, the dealer will replace the engine with a new one.
Summary
Issue: On certain vehicles, the connector for the audio display unit may have been damaged during assembly. This could cause the backup camera system to not activate when the transmission is shifted into reverse. Canadian regulations require the rearview image to display when in reverse gear. Safety Risk: A rearview camera that does not turn on could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Toyota will notify owners by mail including instructions on how to inspect for the issue. Owners who are uncomfortable inspecting for themselves can take their vehicle to a dealer to have the backup camera system inspected. The audio display unit will be replaced with a new one if necessary.
Summary
Issue: On certain vehicles, a defect could cause the brake booster pump to fail. This could result in a loss of braking assist. If the failure occurs, the driver will be provided with both visual and audible warnings. It would also cause the Vehicle Stability Control system to turn off. Safety Risk: A loss of braking assist could cause extended stopping distances and increase the risk of a crash. A loss of Vehicle Stability Control would cause the vehicle to not meet the requirements of Canadian regulations, and could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to inspect, and if necessary, replace the brake booster pump.
Summary
On certain vehicles, the electrical power cords of some dealer installed block heaters may have been improperly manufactured, causing the wires to contact each other, resulting in a short circuit. A short circuit could lead to a fire which would increase the risk of injury and/or damage to property. Correction: For vehicles where the subject block heater was approved for installation, the dealer will replace the block heater assembly with a new one of an improved design. For vehicles where the subject block heater was not approved for installation, dealers will remove the block heater assembly. In the interim, until the remedy can be performed, dealers will cut the plug end from the block heater cord to disable the block heater's operation.
Related Recall Checks
Check recalls for specific Toyota RAV4 Hybrid model years