2008 Lexus Is 350

Safety Recalls & Notices

We found 18 safety recalls for the 2008 Lexus Is 350. Recalls are sourced from both NHTSA (US) and Transport Canada databases. Contact your authorized Lexus dealer to schedule free repairs.

Total
18
safety notices
Units
626
vehicles affected
Recent
Oct 17, 2019
last notice date

Summary

On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Depending on the model, dealers will either replace the passenger frontal airbag inflator or airbag assembly. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.

Campaign ID:2017007
Units Affected:130
Contact authorized dealer for service

Summary

On certain vehicles, the fuel delivery pipes in the engine compartment may have been produced with particles from the anti-corrosion plating on the gasket seating surface where the fuel pressure sensor is installed. This could affect the sealing properties of the gasket seated between the pressure sensor and the pipe, potentially resulting in a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will replace the gasket and repair the gasket seating surface.

Campaign ID:2014458
Units Affected:18
Contact authorized dealer for service

Summary

On certain vehicles, the bolts used to secure the housing and sprocket of the intake-side Variable-Valve Timing (VVT) gear assembly could loosen. If this occurs, the VVT gear will not control the intake valves correctly. In some instances, the VVT gear housing and sprocket could separate, causing the engine to stall. Engine stalling would result in a loss of vehicle propulsion which, in conjunction with traffic and road conditions, and the driver’s reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the VVT unit with an improved version.

Campaign ID:2013297
Units Affected:3
Contact authorized dealer for service

Summary

On certain vehicles, the wiper arm securing nuts could have been insufficiently tightened during assembly. If the movement of the wipers is restricted by an external load, such as heavy snow on the windshield, the wiper arms could slip and one or both wipers could become inoperative. If this occurs, driver visibility could be reduced, which could increase the risk of a crash causing injury and/or property damage. Correction: Dealers will clean the mating surface of the wiper arm and motor shaft and install improved wiper arm nuts.

Campaign ID:2013031
Units Affected:16
Contact authorized dealer for service

Summary

On certain GS 300, GS 300 AWD, GS 350, IS 250, IS 250 AWD and IS 350 vehicles, the fuel pressure sensor connected to the engine fuel delivery pipe may not have been sufficiently tightened during vehicle assembly. Should the pressure sensor loosen, fuel could leak past a gasket used in the connection between the sensor and pipe, and through the threaded portion of the sensor. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will inspect for fuel leakage from the threaded portion of the fuel pressure sensor. If there are no signs of a fuel leak, the fuel pressure sensor will be tightened to specifications. If a fuel leak is confirmed, the gasket between the sensor and the fuel delivery pipe will be replaced, and the sensor will be tightened.

Campaign ID:2011037
Units Affected:11
Contact authorized dealer for service

Summary

On certain vehicles, the material composition of the engine valve springs may include micro-foreign objects, which may compromise the strength of the valve spring, causing the spring to degrade and break. If a valve springs breaks, abnormal noise and rough engine performance will be noticed and, in the worst case, the engine could fail and stop suddenly while the vehicle is in motion. A sudden engine failure would result in lost propulsion which, in conjunction with traffic, road conditions, and driver's reactions, could increase the risk of a crash causing property damage, personal injury or death. Correction: Dealers will install new valve springs.

Campaign ID:2010221
Units Affected:3
Contact authorized dealer for service

Summary

On certain vehicles, the accelerator pedal may become stuck in the wide open position due to an unsecured or incompatible driver's floor mat. A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death. Correction: Dealers will reconfigure the shape of the accelerator pedal. Certain models will also have the shape of the floor underneath the accelerator pedal modified and/or a brake override system installed.

Campaign ID:2009290
Units Affected:437
Contact authorized dealer for service

Summary

On certain vehicles, the use of selected ethanol fuels may cause the aluminium fuel rails to corrode. This could result in plugged fuel injector(s), causing a rough engine idle and/or the illumination of the engine warning lamp. Corrosion may also cause a pinhole to develop on the fuel rail, which could result in fuel leakage. Fuel leakage, in the presence of an ignition source, could result in a vehicle fire. Correction: Dealers will replace the fuel rails.

Campaign ID:2009015
Units Affected:8
Contact authorized dealer for service

Summary

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350 and 2010-2015 Lexus IS250C and IS350C vehicles. These vehicles had their driver or passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

Campaign ID:146485
Component:AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE

Potential Consequence

An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy

Toyota will notify owners. Depending on the vehicle model, dealers will replace the front driver inflator, front passenger airbag inflator, the airbag assembly, or the front passenger airbag sub-assembly and inflator. The recall began November 20, 2019. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are J0A, J0B, and J0C. Lexus' numbers for this recall are JLI, JLJ, and JLK.

Contact authorized dealer for service

Summary

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350 and 2010-2015 Lexus IS250C and IS350C vehicles. These vehicles had their driver or passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

Campaign ID:146484
Component:AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE

Potential Consequence

An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy

Toyota will notify owners. Depending on the vehicle model, dealers will replace the front driver inflator, front passenger airbag inflator, the airbag assembly, or the front passenger airbag sub-assembly and inflator. The recall began November 20, 2019. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are J0A, J0B, and J0C. Lexus' numbers for this recall are JLI, JLJ, and JLK.

Contact authorized dealer for service

18 Active Recalls

Requires attention

Recent Activity
2019
2 recalls
2018
2 recalls
2017
2 recalls
Cardog App Icon

Get the Cardog App

Access your vehicle valuations, market insights, and car research tools on the go. Available for both iOS and Android devices.

Download app
Important Notice
Contact your dealer to verify recalls for your specific VIN and schedule service.

2008 Lexus Is 350 Recall FAQs

Common questions about recalls for this vehicle

Related Recall Checks

Compare recall history with competitors and alternatives to the 2008 Lexus Is 350.

2008 BMW X5AWD 4dr 4.8i
2008 BMW X6AWD 4dr xDrive35i
Show 14 more
2008 BMW Z42dr Roadster M
2008 Saab 9-35dr Wgn SportCombi Auto Aero
2008 Saab 9-54dr Sdn Auto
2008 Audi S44dr Avant Wgn Man *Ltd Avail*
2008 Audi Q7quattro 4dr 4.2L Premium