Safety Recalls & Notices
We found 3 safety recalls for the 2004 Ford F-350 Super Duty. Recalls are sourced from both NHTSA (US) and Transport Canada databases. Contact your authorized Ford dealer to schedule free repairs.
On certain 2011 Ranger vehicles, the multi-function switch, installed during vehicle assembly, could malfunction and fail. Additionally, other vehicle models may have received the affected switch as a replacement part during service, and are therefore also involved in this campaign. Failure of the multi-function switch could result in a loss of turn signal, tail lamp, hazard warning signal flasher and/or stop lamp function. Failure of these lighting components to illuminate may result in the following road users being unaware of the driver's intentions, as well as reducing vehicle conspicuity during hours of darkness, which could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the multi-function switch.
On certain vehicles equipped with a 6.0L diesel engine, the Fuel Injection Control Module (FICM) wire harness may chafe against an engine bolt. Also, the Injection Control Pressure (ICP) sensor connector terminals may have an improper crimp height that may result in intermittent or permanent loss of the ICP sensor signal. FICM wire harness chafes or improper ICP sensor connector crimps may cause the vehicle to stall without warning while driving. If the vehicle stalls, it may or may not restart. Correction: For all F-Superduty and Excursion vehicles, dealers will inspect the FICM wire harness for chafing. If bare wires have not been exposed, dealers will install a wire protection kit. If bare wires have been exposed, dealers will install a new wire harness. For all E-Series and, depending on build date, some F-Superduty and Excursion vehicles, dealers will install a new ICP sensor connector with certified crimps.
Certain F250/350 King Ranch and Lariat 4x4 single rear wheel vehicles equipped with Goodyear Wrangler AT/S LT275/65R18 tires fail to conform to the requirements of CMVSS 120. One or more of the tires installed may have an incorrect load range rating for the vehicle, which can result in a tire being overloaded. If a tire is operated in an over-loaded or over-inflated condition, the tire may rupture without warning resulting in a rapid air loss, which could increase the risk of a crash. Correction: Dealer will replace the load range "C" tires with load range "E" tires.
Requires attention
Common questions about recalls for this vehicle
Compare recall history with competitors and alternatives to the 2004 Ford F-350 Super Duty.