2010 Bmw X5
Safety Recalls & Notices
35 Active Recalls
Requires attention
Label
Summary
Issue: On certain vehicles, the tire and loading information label does not list that there is no spare tire in both official languages. The label reads as "NONE" when it should read as "NONE / AUCUN". Canadian regulations require the information to be listed on the label in both English and French. Safety Risk: This error does not affect vehicle safety. Corrective Actions: This is not a recall. The company has corrected the tire and loading information label for all new vehicles.
Engine
Summary
Issue: On certain vehicles, the variable camshaft timing (VANOS) adjustment unit housing bolts could loosen or break. As a result, the camshaft could become incorrectly adjusted and cause the engine to enter a reduced power mode (limp mode) or to stall while driving. Safety Risk: A sudden loss of engine power could increase the risk of a crash. Corrective Actions: BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the VANOS bolts.
ENGINE AND ENGINE COOLING:ENGINE
Summary
BMW of North America, LLC (BMW) is recalling certain 2010-2012 1 Series Coupe, 1 Series Convertible, 3 Series Sedan, 3 Series Convertible, 2010-2011 3 Series Sportswagon, 3 Series Coupe, 5 Series Sedan, X3 xDrive 28i, X3 xDrive 30i, X5 xDrive30i, and Z4 sDrive30i vehicles. The aluminum bolts that secure the housing for the variable camshaft timing adjustment (VANOS) unit can loosen over time and possibly break.
Potential Consequence
Loose or broken VANOS unit bolts can result in an engine stall, increasing the risk of a crash.
Remedy
Dealers will replace the four VANOS bolts, free of charge. Interim letters notifying owners of the safety risk are expected to be mailed December 18, 2023. Owner notification letters were mailed June 19, 2024. Owners may contact BMW customer service at 1-800-525-7417.
Engine
Summary
Issue: On certain vehicles equipped with an N52 or N52K 6-cylinder engine, a manufacturing problem could cause the PCV valve heater (blow-by heater) to short circuit and overheat. Note: This replaces Transport Canada recalls 2017-470 and 2019-170. Only vehicles equipped with an N52 or N52K engine require this repair. Safety Risk: An overheated engine PCV valve heater could create the risk of a fire, even while the vehicle is parked and turned off. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to install a wire harness repair kit. BMW recommends that you should park your vehicle outdoors until the recall repairs have been completed.
Airbag
Summary
Issue: This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the passenger-front airbag module. The passenger-front airbag module will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Airbag
Summary
Issue: This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the driver-front airbag inflator. The driver-front airbag module or inflator will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
Summary
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i xDrive and M3, 2009-2011 335D, 2006-2012 325xi, 328i, 328xi and 328i xDrive, 2010-2011 X6 ActiveHybrid, 2007-2013 328i, 335i, 335is, M3 Coupes, X5 30si, X5 xDrive30i, X5 xDrive35i, X5 48i, X5 xDrive48i, X5 xDrive50i and X5 M, 2009-2013 X5 xDrive35d and 2008-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles equipped with non-desiccated driver frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Potential Consequence
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
Summary
BMW of North America, LLC (BMW) is recalling certain 2009-2012 X5 xDrive35d, 2008-2012 X6 xDrive35i, X6 xDrive50i and X6 M, 2007-2012 X5 30si, X5 xDrive30i, X5 xDrive35i, X5 48i, X5 xDrive48i, X5 xDrive50i and X5 M and 2010-2011 X6 ActiveHybrid vehicles equipped with non-desiccated, passenger frontal air bag inflators containing phase stabilized ammonium nitrate (PSPI-2) propellant that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Potential Consequence
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until this remedy is performed. BMW will notify owners, and dealers will replace the passenger front air bag, free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
Summary
BMW of North America, LLC (BMW) is recalling certain 2007-2013 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5 M vehicles, 2008-2014 X6 xDrive35i, X6 xDrive50i and X6 M vehicles, 2009-2013 X5 xDrive35d vehicles and 2010-2011 X6 ActiveHybrid vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Potential Consequence
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the remedy is performed. BMW will notify owners, and dealers will replace the passenger frontal air bag module, free of charge. The recall began March 14, 2019. Owners may contact BMW customer service at 1-800-525-7417.
Airbag
Summary
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag module replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
ENGINE AND ENGINE COOLING:ENGINE
Summary
BMW of North America, LLC (BMW) is recalling certain 2009-2013 X5 xDrive 35d diesel vehicles. The engine idler pulley bolt may loosen over time and break.
Potential Consequence
If the idler pulley bolt breaks, the vehicle may unexpectedly lose power-assisted steering, increasing the risk of a crash.
Remedy
BMW will notify owners, and dealers will replace the idler pulley bolt with an improved part, free of charge. The recall began March 11, 2019. Owners may contact BMW customer service at 1-800-525-7417.
Steering
Summary
On certain BMW X5 xDrive35d (diesel) vehicles, the engine belt idler pulley bolt could loosen and/or break. This may cause the belt to detach, resulting in a sudden loss of power steering assist. A vehicle experiencing a loss of power steering assist would revert to a manual steering mode which would require greater driver effort, especially at low vehicle speeds. This could ultimately result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the idler pulley bolt. Note: This recall supersedes and expands upon recall 2012-396.
ENGINE AND ENGINE COOLING:ENGINE
Summary
BMW of North America, LLC (BMW) is recalling certain 2011-2012 BMW 550i, 550i xDrive, 550i Gran Turismo, 550i Gran Turismo xDrive, 750i, 750Li, 750i xDrive, 750Li xDrive, 760Li, X5 xDrive50i, X5 M, X6 xDrive50i, X6 M, ActiveHybrid7, MINI Cooper S Convertible, John Cooper Works (JCW) Convertible, Cooper S Countryman, Cooper S Countryman ALL4, Cooper S, JCW, Cooper S Clubman, JCW Clubman, Cooper S Roadster, JCW Roadster, Cooper S Coupe, JCW Coupe and Rolls-Royce Ghost, 2011 BMW X6 Hybrid and 2012 BMW 650i Coupe, 650i xDrive Coupe, 650i Convertible and 650i xDrive Convertible vehicles. The electric auxiliary water pump may fail and cause the circuit board to overheat.
Potential Consequence
If the circuit board were to overheat, it can increase the risk of a fire.
Remedy
BMW will notify owners, and dealers will replace the electric auxiliary water pump, free of charge. Depending on the model, there are currently limited parts available, however not all parts are available at this time. Owners will be notified of the recall beginning June 11, 2018, and will receive a second notification when remedy parts become available. Owners may contact BMW customer service at BMW 1-800-525-7417, MINI at 1-866-825-1525, or Rolls-Royce at 1-877-877-3735. Note: BMW recommends that owners park their vehicle outdoors until the recall remedy has been performed.
ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER
Summary
BMW of North America, LLC (BMW) is recalling certain 2011-2012 BMW 550i, 550i xDrive, 550i Gran Turismo, 550i Gran Turismo xDrive, 750i, 750Li, 750i xDrive, 750Li xDrive, 760Li, X5 xDrive50i, X5 M, X6 xDrive50i, X6 M, ActiveHybrid7, MINI Cooper S Convertible, John Cooper Works (JCW) Convertible, Cooper S Countryman, Cooper S Countryman ALL4, Cooper S, JCW, Cooper S Clubman, JCW Clubman, Cooper S Roadster, JCW Roadster, Cooper S Coupe, JCW Coupe and Rolls-Royce Ghost, 2011 BMW X6 Hybrid and 2012 BMW 650i Coupe, 650i xDrive Coupe, 650i Convertible and 650i xDrive Convertible vehicles. The electric auxiliary water pump may fail and cause the circuit board to overheat.
Potential Consequence
If the circuit board were to overheat, it can increase the risk of a fire.
Remedy
BMW will notify owners, and dealers will replace the electric auxiliary water pump, free of charge. Depending on the model, there are currently limited parts available, however not all parts are available at this time. Owners will be notified of the recall beginning June 11, 2018, and will receive a second notification when remedy parts become available. Owners may contact BMW customer service at BMW 1-800-525-7417, MINI at 1-866-825-1525, or Rolls-Royce at 1-877-877-3735. Note: BMW recommends that owners park their vehicle outdoors until the recall remedy has been performed.
Electrical
Summary
On certain vehicles, the auxiliary water pump (which cools the turbocharger after the engine is turned OFF) can overheat and fail. This could result in a vehicle fire causing injury and/or damage to property. Correction: Dealers will replace the auxiliary water pump. Note: Owners are advised to park the vehicle outdoors until the remedy is applied. Additional note: This is an expansion of recalls 2011-376 and 2012-008.
AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
Summary
BMW of North America, LLC (BMW) is recalling certain 2007-2013 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i, X5 M, 2009-2010 X5 xDrive35d vehicles and 2009-2013 X6 xDrive35i, X6 xDrive50i, and X6 M vehicles ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." BMW is also recalling certain 2007-2010 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i, X5 M, X5 xDrive35d, X6 xDrive35i, X6 xDrive50i and X6M vehicles ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." BMW is also recalling certain 2007-2009 X5 xDrive30i, X5 xdrive35i, X5 xDrive48i, X5 xDrive50i, X5 M, X5 xDrive35d, X6 xDrive35i, X6 xDrive50i and X6M vehicles ever registered in the states of AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY or "Zone C." These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Potential Consequence
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the remedy is performed. BMW will notify owners, and dealers will replace the passenger front air bag module, free of charge. The recall is expected to begin March 2018. Owners may contact BMW customer service at 1-800-525-7417.
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV)
Summary
BMW of North America, LLC (BMW) is recalling certain 2008-2011 128i and 2007-2011 328i, 328xi, 328i xDrive, 525i, 525xi, 528i, 528xi, 530i, 530xi, X3 3.0si, X3 xDrive30i, X5 xDrive30i, Z4 3.0i, Z4 3.0si and Z4 sDrive30i vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
Potential Consequence
An electrical short can cause the parts within the PCV valve to melt, increasing the risk of a fire, even when the vehicle is not in use.
Remedy
BMW will notify owners, and dealers will replace the PCV valve heater, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notification by the end of October 2018. Owners may contact BMW customer service at 1-800-525-7417.
Engine
Summary
On certain vehicles equipped with the N52 6-cylinder engine, an electrical short could occur in the PCV valve heater due to manufacturing irregularities. If this occurs, the surrounding plastics could overheat, melt and potentially cause a fire, which could increase the risk of injury and/or damage to property. Correction: Dealers will replace the PCV valve heater.
FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
Summary
BMW of North America, LLC (BMW) is recalling certain model year 2007-2011 BMW X5 3.0si, X5 4.8i, X5 M, X5 xDrive30i, X5 xDrive35i, X5 xDrive48i and X5 xDrive50i, 2008-2011 X6 x Drive35i, X6 xDrive50i and X6 M, 2010-2011 X6 ActiveHybrid, 535i xDrive Gran Turismo, 535i Gran Turismo, 550i xDrive Gran Turismo and 550i Gran Turismo, 2011-2012 528i, 535i, 535i xDrive, 550i and 550i xDrive and 2012 535i ActiveHybrid, 640i Convertible, 650i Convertible, 650i xDrive Convertible, 650i Coupe and 650i Coupe xDrive vehicles. The affected vehicles have in-tank fuel pumps that may have insufficiently crimped wire contacts.
Potential Consequence
The loose wires may cause the connector to melt, resulting in a fuel leak. Additionally, the fuel pump may stop working, possibly causing an engine stall and increase the risk of a crash.
Remedy
BMW will notify owners, and dealers will replace the fuel pump module, free of charge. The recall began February 2017. Owners may contact BMW customer service at 1-800-525-7417.
Fuel System
Summary
On certain vehicles, the wires going to the in-tank fuel pump may not have been crimped correctly. An incorrect crimp could increase the resistance of the circuit which could cause the contact pin to heat and melt the surrounding plastic. This could potentially cause the fuel pump to stop working causing the vehicle to stall without warning, increasing the risk of a crash causing injury and/or damage to property. Also, in a very rare case, a fuel leak combined with an external ignition source, could increase the risk of fire causing injury and/or damage to property. Correction: Dealers will replace the fuel delivery module.
AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
Summary
BMW of North America, LLC (BMW) is recalling certain model year 2007-2011 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5M vehicles, 2009-2011 X5 xDrive35d vehicles, 2008-2011 X6 xDrive35i, X6 xDrive50i and X6 M vehicles, and 2010-2011 X6 ActiveHybrid vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, BMW is recalling certain model year 2007-2008 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5M vehicles, and 2008 BMW X6 xDrive35i, X6 xDrive50i and X6 M vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Vehicles of these model years and models that were not originally sold or ever registered in either Zones A or B are not subject to this safety recall. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to high absolute humidity and temperature cycling.
Potential Consequence
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until they have been repaired. BMW will notify owners, and dealers will replace the passenger frontal air bag inflator or air bag module, free of charge. The recall began July 28, 2017. Owners may contact BMW customer service at 1-800-525-7417.
Airbag
Summary
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the front driver air bag inflator or air bag module, depending on the vehicle model.
Engine
Summary
On certain vehicles, housing bolts for the variable camshaft timing system could break, allowing camshaft timing to deviate. If this occurs, the engine would revert to "limp home mode", limiting available engine power. In rare instances the engine could stall, increasing the risk of a collision causing injury and/or damage to property. Correction: Dealers will replace housing bolts that break and perform associated repairs for 10 years/unlimited mileage from the vehicle's in-service date. Note: This applies only to vehicles not covered by recall 2014-127.
Engine
Summary
On certain vehicles, housing bolts for the variable camshaft timing system could break, allowing camshaft timing to deviate. If this occurs, the engine would revert to "limp home mode", limiting available engine power. This could increase the risk of a collision causing injury and/or damage to property. Correction: Dealers will replace affected bolts.
FUEL SYSTEM, DIESEL: PRE-HEATER
Summary
BMW is recalling certain model year 2009-2010 X5 xDrive35d vehicles equipped with a diesel engine and manufactured from June 13, 2009, through November 9, 2009. The fuel filter heater, which is used for warming up the diesel fuel during vehicle operation at low outside temperatures, could experience an electrical overload condition and become permanently activated.
Potential Consequence
The fuel filter heater could remain activated even when the ignition is off and lead to a dead battery. The unit could also overheat, possibly resulting in a vehicle fire.
Remedy
BMW will notify owners, and dealers will replace the fuel filter heater, free of charge. The safety recall began on September 26, 2013. Owners may contact BMW customer relations at 1-800-525-7417.
Fuel System
Summary
On certain vehicles equipped with a diesel engine, the fuel filter heater (used for warming diesel fuel during vehicle operation at low ambient air temperature) could malfunction. This could allow permanent activation of the fuel filter heater, including activation on a parked vehicle with the ignition in the OFF position, which could drain the battery. A discharged battery would prevent engine start-up. In certain cases the heater unit could overheat, which could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will replace the fuel filter heater assembly. Note: This is an expansion of recall 2011-310.
Brakes
Summary
On certain vehicles, a check valve in the brake vacuum pump may leak a small amount of lubricating oil. Over time, this could result in contamination of the brake booster. Loss of brake power assist could occur which, in conjunction with traffic, road conditions, and driver's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the brake booster and master cylinder. Additionally, the brake vacuum line (including the check valve) will be replaced to eliminate the possibility of oil reaching the brake booster.
Steering
Summary
On certain BMW X5 xDrive35d (diesel) vehicles, the engine belt idler pulley bolt could loosen and/or break. As such, the belt may become detached, resulting in a sudden loss of steering power assist. A vehicle experiencing a loss of steering power assist would revert to a manual steering mode which would require greater driver effort, especially at low vehicle speeds. This could ultimately result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the idler pulley bolt and tighten with a revised torque procedure. A thread locking compound will be applied to the replacement bolt.
Label
Summary
Certain vehicles fail to conform to Canada Motor Vehicle Safety Standards. Specifically, the compliance label does not indicate the wheel rim size, as required by the Standard. Correction: Due to the inconsequential nature of this non-compliance, no action will be taken.
ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
Summary
BMW IS RECALLING CERTAIN MODEL YEAR 2011 5-SERIES, MODEL YEAR 2010-2011 5-SERIES GRAN TURISMO, MODEL YEAR 2009-2011 7-SERIES, MODEL YEAR 2010-2011 X5 SAV, AND MODEL YEAR 2008-2011 X6 SAV VEHICLES EQUIPPED WITH 8- OR 12-CYLINDER, TURBOCHARGED, ENGINES BECAUSE THE CIRCUIT BOARD FOR THE ELECTRIC AUXILIARY WATER PUMP CAN OVERHEAT.
Potential Consequence
THIS COULD LEAD TO A SMOLDERING OF THE PUMP OR AN ENGINE COMPARTMENT OR VEHICLE FIRE.
Remedy
BMW WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE AUXILIARY WATER PUMP FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 19, 2011. OWNERS MAY CONTACT BMW CUSTOMER RELATIONS AND SERVICES AT 1-800-525-7417.
Electrical
Summary
On certain vehicles, the auxiliary water pump (which cools the turbocharger after the engine is turned OFF) can overheat and fail. This could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will replace the auxiliary water pump. Note: Owners are advised to park the vehicle outdoors until the remedy is applied.
EXTERIOR LIGHTING
Summary
BMW IS RECALLING CERTAIN MODEL YEAR 2010 X5 M SAV VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT," THESE VEHICLE'S WERE EQUIPPED WITH SIDE MARKER LAMPS, BUT NOT THE POWER SUPPLY CABLES LEADING TO THE LAMPS. AS A RESULT, THE SIDE MARKER LAMPS DO NOT ILLUMINATE.
Potential Consequence
THESE VEHICLES DO NOT COMPLY WITH REQUIREMENTS OF FMVSS NO. 108.
Remedy
BMW WILL INSTALL POWER SUPPLY CABLES FOR THE FRONT SIDE MARKER LAMPS. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING MAY 2010. OWNERS MAY CONTACT BMW AT 800-525-7417.
Lights And Instruments
Summary
On certain X5 M vehicles, the front side marker lamps are not illuminated as required by the Canada Motor Vehicle Safety Standard 108 - Lighting System and Retroreflective Devices. These vehicles were equipped with front side marker lamps, but not with the power supply cables leading to the lamps. As a result, the front side marker lamps do not illuminate. Reduced visibility increases the risk of crash causing property damage, personal injury or death. Correction: Dealers will install power supply cables for the front side marker lamps.
VISIBILITY:WINDSHIELD
Summary
BMW IS RECALLING CERTAIN MODEL YEAR 2010 X5 AND X6 SPORT ACTIVITY VEHICLES MANUFACTURED BETWEEN DECEMBER 14, 2009 AND DECEMBER 16, 2009. IN THE UPPER RIGHT AREA OF THE WINDSHIELD, BONDING MAY BE INSUFFICIENT OVER A LENGTH OF APPROXIMATELY 50CM.
Potential Consequence
IN THE CASE OF A ROLLOVER, THE STABILITY OF THE ROOF COULD BE AFFECTED INCREASING THE RISK OF INJURIES.
Remedy
BMW WILL NOTIFY OWNERS AND AUTHORIZED DEALERS WILL REMOVE THE WINDSHIELD AND THEN REINSTALL WITH THE PROPER BONDING FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 30, 2010. OWNERS MAY CONTACT BMW AT 1-800-525-7417.
Visual System
Summary
On certain vehicles, windshield bonding may be insufficient and, in case of a vehicle rollover, this could adversely affect the rigidity of the vehicle bodyshell structure, which could result in personal injury or death. Correction: Dealers will remove and refit the windshield.
Generated by Cardog • December 16, 2025
2010 Bmw X5
Safety Recalls & Notices
35 Active Recalls
Requires attention
