Safety Recalls & Notices
We found 8 safety recalls for the 2009 Volvo Vn. Recalls are sourced from both NHTSA (US) and Transport Canada databases. Contact your authorized Volvo dealer to schedule free repairs.
On certain vehicles, a defect in the the ball joint seals on the drag link could allow corrosion to form in the joint, leading to accelerated wear. This could result in ball joint failure, potentially resulting in a loss of steering control which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the drag link on affected vehicles. Those found to be loose will be replaced immediately. Drag links found to be still serviceable will be replaced when sufficient replacement parts become available.
Certain vehicles may fail to conform to Canada Motor Vehicle Safety Standard 210 – Seatbelt Assembly Anchorages. The weld used to secure the nut to the center-passenger seatbelt D-ring mounting bracket may not be sufficient to meet the strength requirements of the Standard. Failure of the seatbelt D-ring anchorage to restrain the occupant would increase the risk of personal injury during a crash. Correction: Dealers will replace the D-ring for the middle seating position.
On certain trucks equipped with an air release fifth wheel hitch, the inversion valve on the frame may be orientated where contaminants can enter the valve through the exhaust port. As a result, the brake valve may corrode causing it to malfunction and in some cases result in unintended opening of the fifth wheel's locking mechanism. This could allow the trailer to separate from the towing vehicle while underway. Also, an air loss could increase vehicle stopping distance and result in a crash causing property damage or personal injury. Correction: Dealers will inspect and replace the inversion valve if required.
Volvo Trucks North America (Volvo) is recalling certain model year 2009-2015 Volvo VN trucks manufactured April 14, 2008, to December 23, 2014. The affected vehicles may experience corrosion of the ball joints due to the seals being compromised, possibly resulting in accelerated wear and failure of the ball joint.
Failure of the ball joint may cause separation of the socket and a complete loss of steering, increasing the risk of a crash.
Volvo will notify owners, and dealers will inspect and replace the drag links, free of charge. Parts are not currently available. Volvo issued an interim notification to owners on October 28, 2015. Replacement parts are now available. Notices to owners were mailed on March 1, 2016. Owners may contact Volvo customer service at 1-877-800-4945 option #1. Volvo's number for the vehicle inspection is RVXX1508. Volvo's number for the replacement of drag links is RVXX1509.
Volvo Trucks North America (Volvo) is recalling certain model year 2009-2015 Volvo VN trucks manufactured April 14, 2008, to December 23, 2014. The affected vehicles may experience corrosion of the ball joints due to the seals being compromised, possibly resulting in accelerated wear and failure of the ball joint.
Failure of the ball joint may cause separation of the socket and a complete loss of steering, increasing the risk of a crash.
Volvo will notify owners, and dealers will inspect and replace the drag links, free of charge. Parts are not currently available. Volvo issued an interim notification to owners on October 28, 2015. Replacement parts are now available. Notices to owners were mailed on March 1, 2016. Owners may contact Volvo customer service at 1-877-800-4945 option #1. Volvo's number for the vehicle inspection is RVXX1508. Volvo's number for the replacement of drag links is RVXX1509.
Volvo is recalling certain model year 2002-2013 VHD and VN trucks, manufactured from August 4, 2000, through June 22, 2012, and equipped with bench passenger seats. The seat belt d-ring weld may not be sufficient enough to meet the seat belt pull test. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages."
In the event of a crash, an insufficient seat belt weld may prevent the seat belt from properly restraining the occupant. This increases the risk of injury to the seat occupant.
Volvo Trucks of America will notify owners, and dealers will replace the suspected d-ring, free of change. The safety recall began on May 10, 2013. Owners may contact Volvo at 1-336-393-2000.
VOLVO TRUCKS IS RECALLING CERTAIN MODEL YEAR 2007 AND 2009 VHD, MODEL YEAR 2006 THROUGH 2010 VN, AND MODEL YEAR 2007 THROUGH 2009 VT TRUCKS MANUFACTURED FROM NOVEMBER 7, 2005, THROUGH OCTOBER 30, 2009, EQUIPPED WITH AN AIR RELEASE FIFTH WHEEL. THE INVERSION VALVE ON THE FRAME MAY BE ORIENTATED WHERE CONTAMINANTS CAN ENTER THE VALVE THROUGH THE EXHAUST PORT. AS A RESULT, THE BRAKE VALVE MAY CORRODE.
CORROSION OF THE VALVE CAN CAUSE IT TO MALFUNCTION, THEREBY ADVERSELY AFFECTING BRAKING PERFORMANCE AND INCREASING THE RISK OF A CRASH.
DEALERS WILL INSPECT THE INVERSION VALVE AND REPLACE AS REQUIRED. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE FEBRUARY 18, 2011. OWNERS MAY CONTACT VOLVO TRUCKS AT 1-800-528-6586.
VOLVO TRUCKS IS RECALLING CERTAIN MODEL YEAR 2009-2010 VNL, VT, AND 780 TRUCKS MANUFACTURED FROM MARCH 1, 2008 THROUGH FEBRUARY 6, 2009. THE BOTTOM TRACK THAT ATTACHES TO THE ARMS USED TO OPEN AND CLOSE THE WINDOW MAY DE-BOND, WHICH RESULTS IN THE GLASS COMING LOOSE AT THE BOTTOM.
THE UPPER WINDOW HINGES MAY FAIL AND ALLOW THE GLASS TO FALL OUT OF THE WINDOW FRAME CREATING A ROAD HAZARD AND INCREASING THE RISK OF A CRASH.
DEALERS WILL INSPECT AND REPAIR AS REQUIRED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 1, 2010. OWNERS MAY CONTACT VOLVO TRUCKS AT 1-800-528-6586.
Requires attention
Common questions about recalls for this vehicle
Compare recall history with competitors and alternatives to the 2009 Volvo Vn.