1999 Chrysler 300m
Safety Recalls & Notices
8 Active Recalls
Requires attention
EXTERIOR LIGHTING
Summary
SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
Potential Consequence
DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.
Remedy
SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.
POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:FLOOR SHIFT
Summary
ON CERTAIN PASSENGER VEHICLES, THE FLOOR SHIFTER IGNITION-PARK INTERLOCK MAY FAIL AND ALLOW THE SHIFTER TO BE MOVED OUT OF THE PARK POSITION WITH THE KEY REMOVED. AN INOPERATIVE INTERLOCK MAY ALSO ALLOW THE KEY TO BE REMOVED WHEN THE SHIFTER HAS NOT BEEN PLACED IN THE PARK POSITION.
Potential Consequence
EITHER CIRCUMSTANCE MAY RESULT IN THE VEHICLE ROLLING AWAY WITHOUT WARNING.
Remedy
DEALERS WILL INSTALL A NEW LOAD-LIMITING PUSH ROD INTO THE FLOOR SHIFTER LEVER OF THE AFFECTED VEHICLES. OWNER NOTIFICATION BEGAN ON JUNE 14, 2004. OWNERS SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Other
Summary
On certain vehicles equipped with an automatic transmission and a floor-mounted shifter, the ignition-park interlock may become defeated and allow the shifter to be moved out of the Park position with the key removed. An inoperative interlock may also allow the key to be removed when the shifter has not been placed in the Park position. This may result in the vehicle rolling away without warning. Correction: Dealer will inspect the function of the ignition-park interlock system. Vehicles found with functional interlock systems will have a load-limiting push rod installed into the floor shifter lever. Vehicles with a non-functional ignition-park interlock system will have the shifter assembly replaced.
Seats And Restraints
Summary
On certain vehicles, the driver seat recliner bolts could break which would allow the seat back to recline unexpectedly while the vehicle is in motion. Correction: Dealer will replace the recliner bolts with new shoulder bolt and, for vehicles with power driver seats built through January 2000, the recliner tracks will be realigned and a longer recliner driveshaft will be installed to prevent disengagement.
SEATS:FRONT ASSEMBLY:RECLINER
Summary
ON CERTAIN PASSENGER VEHICLES, SEAT BACK RECLINER BOLT BREAKAGE CAN OCCUR RESULTING IN THE SEAT BACK RECLINING UNEXPECTEDLY.
Potential Consequence
IF THE SEAT BACK UNEXPECTEDLY RECLINES WHILE THE CAR IS BEING DRIVEN, IT COULD RESULT IN LOSS OF VEHICLE CONTROL, INCREASING THE RISK OF A CRASH.
Remedy
DEALERS WILL REPLACE THE RECLINER BOLTS. OWNER NOTIFICATION BEGAN ON APRIL 23, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Seats And Restraints
Summary
On certain vehicles, the adjustable turning loop on the shoulder belt top mounting bolt may have been manufactured with a core hardness that exceeds the specification for this type of application. Due to the excessive core hardness, these mounting bolts may not withstand the force required to function properly in certain impact situations, increasing the risk of injury to a belted occupant. Correction: The upper adjustable turning loop bolt will be replaced with a bolt of proper hardness.
SEAT BELTS
Summary
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE SEAT BELT SHOULDER HEIGHT ADJUSTABLE TURNING LOOP (ATL) TOP MOUNTING BOLT WAS INADEQUATELY MANUFACTURED.
Potential Consequence
THE AFFECTED MOUNTING BOLTS MAY NOT WITHSTAND SUFFICIENT FORCE TO FUNCTION PROPERLY IN CERTAIN IMPACT SITUATIONS, INCREASING THE RISK OF INJURY TO A BELTED OCCUPANT.
Remedy
DEALERS WILL REPLACE THE SHOULDER BELT HEIGHT ADJUSTER MOUNTING BOLTS.
Emissions
Summary
Certain vehicles may not comply with CMVSS 1101 - emission device. The wrong vehicle emission control information label (VECI) may have been installed on the subject vehicles. Correction: Correct VECIlabel along with installation instructions will be mailed to owners.
Generated by Cardog • December 16, 2025
1999 Chrysler 300m
Safety Recalls & Notices
8 Active Recalls
Requires attention
