Toyota
Corolla

The location of the collision sensors are positioned too low to allow consistent deployment of the airbags in the event of a collision with newer generation pickup trucks. The bumpers on the pickup trucks are too high, so a rear end collision results in the Toyota Corolla passing underneath the truck, and the air bag sensors do not sense the collision. The collision is only stopped when the windshield of the Toyota makes contact with the bumper, or the front of car impacts the axle of the pickup trucks.

The contact owns a 2005 Toyota Corolla. The contact stated after an air bag recall repair was performed on the vehicle, the front passenger's seat belt warning light illuminated. The dealer was notified of the failure, but no assistance was provided. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not notified of the failure. The failure mileage was unknown.

My son drove the car to the store less than 2 miles from the house and the airbag light came on and stayed while he was driving. He looked up the light in the owners manual and it said take vehicle to the Toyota dealer immediately! I know multiple cars we have owned in the past have had airbag recalls. I can not remember if this one has ever been recalled and repaired in the past. I attached the photos of the light and the manual.

Complaint Against Ben Nielsen Skyline Automotive – Faulty Repairs & Lack of Response I am filing a complaint regarding incomplete and faulty repairs performed on my household’s 2005 Toyota Corolla CE at Ben Nielsen Skyline Automotive on November 22, 2024 (Invoice #1 attached) and January 3, 2025 (Invoice #2 attached). During my first visit, the mechanic identified an oil leak, added dye to locate the source, and instructed me to return after 100 miles for further repairs. I followed these instructions and returned on January 3, 2025, when the shop also adjusted the tie rod and installed new rear brakes. At the time, I trusted that the work had been completed to a professional standard and that my vehicle was safe to drive. However, during a visit to Shirlington Shell on February 22, 2025, for an unrelated inspection (Invoice #3 attached), their mechanic raised serious concerns about the quality of repairs done by Ben Nielsen Skyline Automotive: - The tie rod adjustment was not completed properly, which the second mechanic stated made the car potentially unsafe to drive (video evidence available upon request). - The fluid leak was not fully resolved. - The rear brakes installed by Ben Nielsen Skyline Automotive are making noise, suggesting they were not installed correctly. These issues indicate that the repairs I paid for were either incomplete or improperly performed, leading to safety concerns and additional costs to diagnose and correct the problems. After discovering these faults, I made multiple attempts to contact Ben Nielsen Skyline Automotive via phone and email to request a resolution, including a full reimbursement for the tie rod adjustment, fluid leak repair, and rear brake installation. Unfortunately, my email messages and calls have gone unanswered, leaving me no choice but to escalate this matter.

Odometer on 2005 Corolla S stopped working at 299,999 miles. Will not roll over to 300,000. This has been a topic of discussion on many Toyota vehicle online forums and has been an ongoing issue for many similar makes/years/models. There were no prior warnings/messages related to the odometer not working any longer when it reaches any certain number. Several mechanics I have spoken to, including Toyota service advisors, have told me they are aware of this issue. No inspections have been done. Why would Toyota place an odometer in any of their vehicles that will stop working after reaching any specific number? They have prided themselves as cars that will go many miles. Why would they not disclose this to any Toyota owner? Why should the owner be liable for repairs on this issue when we did not install the part? Why has no recall been issued over this matter?

These 3 things may be related to each other because they all are connected to the steering wheel. My car can be scheduled for an inspection regarding these safety problems. 1. The Airbag warning light is sometimes on when I drive the car. I'm worried it won't work if I'm in a wreck. 2. The horn doesn't work when I press on the part of the steering wheel that should make it work. It does make a loud sound when I press the panic button on my key fob, but only when the car is turned off. I had to stick my head out of the window and yell at a driver who was getting close to hitting my car in a parking lot. I was parked, and they were backing out of their parking stall. They stopped inches away from my car. 3. The cruise control does not work in the car. I think by using this feature, and maintaining a steady speed, it reduces the chances of accidents. How was your safety or the safety of others put at risk? See answers #1, 2 and 3 above. Has the problem been reproduced or confirmed? #1. No. A dealer told me it would cost me $100 to have them check the airbag light. #2. The horn was checked by an independent service center. #3. No. Has it been inspected? #1. This car has been serviced two different times for recalls for the airbag not working correctly. I wonder if the horn and cruise control wires were damaged, or not put back together correctly, when the recall work was being done, while owned by my sister-in-law. #2. No. #3. No. Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? #1. The warning lamp for the airbag started coming on around August 15, 2024. #2. No. It didn't work on February 11, 2023 - when I bought the car. #3. No. It didn't work on February 11, 2023.

The warning lamp for the airbag came On and it has been On for about two weeks now. No issues with the airbag, though. Have not been to a dealer or repair shop for check up. Have not been inspected by any agency.

Unknown - The airbag light has been on for a while. Check engine light is also on, and after a few repairs/replacements of diagnosed issues the light remains. A Texas vehicle inspection report shows a P0420 fault code that will not go away, as well as a P0741 fault code about a torque converter clutch circuit underperforming or is stuck/off. I have a technical service bulletin from the inspection station that reads as follows: 10051865 Date: 04/16/2013 Toyota: In a collision, to help reduce injuries, with seat belt pre=tensioner and supplemental restraint systems (srs), it's possible that the devices may or may not perform as expected with unintended deployment.