Mitsubishi
Outlander

My vehicle shut off on a state route when I had the vehicle towed to the dealership I was informed it was the ecu. I found out a year after my vehicle was purchased, there was a technical service bulletin out in this part. I am not sure why there was not a recall sent when they knew this part could be defective and my life was put at risk by it shutting off on the highway. How is a vehicle safe when it just shuts off. This should have been a recall and not a bulletin. Please reconsider making this a recall. I would hate to see people lose their lives because of this.

The contact owns a 2013 Mitsubishi Outlander Sport. The vehicle was taken to the local dealer to be repaired under NHTSA Campaign Number: 21V144000 (Suspension, Structure); and it was determined the undercarriage was extremely rusted. The vehicle was not repaired due to the rust. The manufacturer was contacted, but no additional assistance was provided. The failure mileage was approximately 100,000. Parts distribution disconnect.

The lights on my clutch are not coming on. I’m concerned there are other electrical issues affecting the cluster and the odometer display

AIRBAG SYSTEM SERVICE REQUIRED message appears on dash. Occurred on 09/20/2018 and again on 09/29/2023. Both times required service to fix. Has now happened again on 10/14/2024. Secondary issue was reported by another driver for same vehicle for NHTSA ID Number: 11339357 and NHTSA ID Number: 11567379

In 2020 I got a recall for engine support from Mitsubishi. We took it in and told me that the support was find that I didn’t need to be replace even tho the recall called for it. They ended up putting rust paint on the support. 4 weeks ago that part broke on my wife when she was driving down the road. The steering wheel was taken out of my wife’s hand while driving. She was able to get the off the road safely. But sprained her wrist. When I found the broken part on the car. I call Mitsubishi themself. When I reported these issue, I was told that someone would be coming to my house to look at the car. I signed a form for them to do that. And for the to read the computer on my car. That was 4 weeks ago. I have emailed them and called them. And no one knows what I’m talking about our replying to my email. And on top of it all we are missing work, at least one day a week because of this.

On Dec 8,2023 our mitsubishi outlander shut off while being driven. When this occurred multiple warning lights come on including, service engine immediately, engine overheating (which it was not) and multiple other lights. It was towed to the dealership where they told us the ECU is bad. Mitsubishi no longer makes the part. They have also told us this is the 3rd vehicle in the last month with the same issue. Car had no power/electrical /engine issues prior to this event. Mitsubishi is offering no solution to fix the issue. Luckily when the car shut down we were driving at a low speed in a neighborhood. If this had happened on the freeway it could have been very dangerous. We now have no car, no possibility of repair and no answers to why this happened without warning.

My electrical system and/or computer brain is not operating properly. About a year and 1/2 ago the low beam passenger light stopped working. I had the bulb replaced at Walmart. 2 months later it went out again. Walmart checked and said the bulb was not the problem so I went to Firestone and was told the wiring was melted. Firestone said my options were to replace the entire harness or pig tail the low beam. I opted for the pig tail. A few months later I had issues with slow starts as if my battery was being drained. A few weeks after that my drivers side low beam started working intermittently. Then went out completely. I went to Gillman dealership in Schertz, TX (330 miles from my home) who said the bulb needed to be replaced which they did. A month later the drivers low beam is out again. Firestone says the wiring has melted on that side too. This time I asked them not to fix it because I wanted to go back to the dealership to repair. 1 week later my battery died twice and the passenger low beam has stopped working again. A mechanic advised that a few years ago he worked on a 2012 Mitsubishi with the same issues and ended up totaling it out because the car’s computer was not modulating voltage properly. He said that car’s computer was not reading the codes correctly and was outputting voltages that did not match the Outlanders configuration. I was told there is a recall for this already. I wanted information on this before contacting the Texas State Attorney General’s Consumer Protection Office.

hello: i purchased this vehicle last nov. the rear hatch was opening fine," but after a couple of months it has stopped and the only way to open it," is from the lever on the inside. you have to use a screw driver or prying tool of some sort to remove the cover in order to get to the lever and you have to lay the back seats down and crawl back there to get to this. i've spoken to other owners who have the same issue. they've had to replace either and or both the actuator and the handle tailgate lock release mechanism. the handle tailgate lock release mechanism is electrical and is susceptible to water getting into it and corrodes the electrical parts. it sits mostly flush one the outside of the hatch where water can get too it. i feel this is a safety issue incase of an accident or emergency if it is imperative to gain access. also the design of the so called emergency release lever is terrible. some people might not have a screw driver or something to pry with in order to remove the cover in order to gain access to the release lever. in my opinion (1)the emergency lever needs to be redisgned and have easier access to it.(2) replace the acutator and or the handle tailgate lock release. it could cost owners up tp $400 to replace these item at a dealership," unless they would want to tackle it themselves. i feel it's worth looking into. thankyou for your time and any help.