2007 Outlander
- $22,410
- from (MSRP)
- 10
- trims


| Trim | MSRP | Live | Trades at | Premium | Instrument |
|---|---|---|---|---|---|
| LS→ LS 4dr SUV AWD (3.0L 6cyl 6A) | $22,410 | — | — | — | — |
| XLS→ XLS 4dr SUV AWD (3.0L 6cyl 6A) | $23,650 | — | — | — | — |
| 2WD 4dr LS→ Mitsubishi Outlander | $25,498 | — | — | — | — |
| 4WD 4dr LS→ Mitsubishi Outlander | $26,998 | — | — | — | — |
| 4WD 4dr XLS→ Mitsubishi Outlander | $32,998 | — | — | — | — |
| 3.0 i V6 24V XL (220 Hp)→ 3.0 i V6 24V XL (220 Hp) | — | — | — | — | — |
| 2.4i (170 Hp)→ 2.4i (170 Hp) | — | — | — | — | — |
| 2.0 DI-D (140 Hp)→ 2.0 DI-D (140 Hp) | — | — | — | — | — |
| 2.0 DI-D (140 Hp) Automatic→ 2.0 DI-D (140 Hp) Automatic | — | — | — | — | — |
| 2.4i (170 Hp) Automatic→ 2.4i (170 Hp) Automatic | — | — | — | — | — |
On certain vehicles, the sunroof may not have been bonded properly and could separate from the vehicle. This could pose a risk to other road users, increasing the risk of injury and/or damage to property. Correction: Dealers will replace the sunroof glass assembly.
2018054 · 18,795 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2007-2010 Outlander, 2008-2010 Lancer, 2009-2010 Lancer Evolution, and 2010 Lancer Sportback vehicles equipped with sunroofs. The sunroof glass may detach from the sunroof assembly, becoming a road hazard to other vehicles.
If the sunroof glass detaches from the assembly while driving, it can become a road hazard, increasing the risk of a crash.
MMNA will notify owners, and dealers will replace the sunroof glass assembly, free of charge. The recall began on February 27, 2018. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-18-003.
18V071000 · 56,641 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain vehicles, water may drain from the windshield cowl area and potentially collect in the area of the wiper motor breathing hole. If the wiper motor is not operating, water could potentially enter the wiper motor through the breathing hole. If this occurs, over time, it could result in corrosion and/or an electrical conduction failure, both of which could result in the wiper motor not operating. If the wiper motor were to stop operating, the windshield wipers would become inoperative, which could limit the driver’s visibility under certain operating conditions which may increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the wiper motor with an upgraded wiper motor that will prevent water intrusion.
2017364 · 42,283 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2007-2013 Outlander vehicles. In the affected vehicles, water may drop between the hood and the windshield and leak into the wiper motor breathing hole. The water may cause internal corrosion of the windshield wiper motor and the possible failure of the motor.
Failure of the wiper motor can cause a loss of visibility, increasing the risk of a crash.
MMNA will notify owners, and dealers will replace the wiper motor, free of charge. The recall began July 28, 2017. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-17-003.
17V461000 · 100,082 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2007-2013 Outlander vehicles manufactured September 8, 2006, to March 29, 2013. In the affected vehicles, water may enter between the hood and windshield and cause the front wiper link ball joint to corrode, possibly resulting in the wiper link separating and the wipers becoming inoperative.
Loss of wiper function can reduce visibility and increase the risk of a crash.
MMNA will notify owners, and dealers will replace the rubber boot on the ball joint to prevent water intrusion. Additionally, they will inspect the wiper motor crank arm for excessive play, replacing it as necessary. These repairs will be done free of charge. The recall began on July 28, 2017. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-16-009.
16V791000 · 100,082 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain vehicles, water may drain from the windshield cowl area onto the front wiper link ball joint. Over time, this could result in corrosion and/or wear to the joint, which could result in the separation of the wiper link ball. If separation were to occur, the windshield wipers could become inoperative, which could limit the driver’s visibility under certain operating conditions which may increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the rubber boot which covers the ball joint with a countermeasure one, and the wiper motor crank arm will also be inspected and replaced as necessary.
2016529 · 42,283 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2002-2007 Lancer, 2004 Lancer Wagon, 2003-2006 Lancer Evolution, 2003-2006 Outlander and 2007-2013 Outlander V-6 vehicles originally sold in, or ever registered in, Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin and the District of Columbia. In the affected vehicles, the front lower control arms may detach due to the front cross member corroding from salt water exposure such as from road salt use.
A detached front control arm can result in the loss of control of the vehicle, increasing the risk of a crash.
MMNA will notify owners, and dealers will inspect the front cross members. Depending on the level of existing corrosion, either a sealing/anti-corrosion agent will be applied or the front cross member will be replaced with a new one that has a sealing/anti-corrosion agent applied to it. These repairs will be performed free of charge. The recall began January 2017. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-16-003.
16V458000 · 194,674 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain vehicles, road salt can corrode the front crossmember assembly, which may ultimately lead to separation of the control arm at the mounting point. This would allow the wheel to rotate off its designed axis, and could result in a loss of vehicle control and a crash causing property damage and/or personal injury. Correction: Dealers will inspect the crossmember and apply an anti-corrosion treatment or replace the assembly, as required.
2016317 · 64,305 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain vehicles, a defect in the brake light switch could cause the brake lights to become inoperative. Failure of the brake lights to illuminate when the brake pedal is depressed could result in a crash causing injury and/or property damage. Correction: Dealers will replace the brake lamp switch.
2014398 · 14,861 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Mitsubishi Motors North America, Inc. (Mitsubishi) is recalling certain model year 2007-2009 Outlander vehicles manufactured December 15, 2006, to October 31, 2007, and April 16, 2008, to August 22, 2009. In the affected vehicles, the brake light switch may malfunction causing the brake lights to not illuminate during brake application.
Brake lights that are inoperative would not warn other drivers that the vehicle is stopping, increasing the risk of a crash.
Mitsubishi will notify owners, and dealers will replace the brake light switch with a new one, free of charge. The recall began in mid-October 2014. Owners may contact Mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is SR-14-010. Note: This recall is an expansion of recall 08V-680 and does not include any vehicles that were previously recalled.
14V564000 · 37,145 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain 2012 to 2014 model year vehicles, due to improper manufacturing of the oil seal boss in certain transfer assemblies, the oil seal can become out of position and allow automatic transmission fluid to enter into the transfer assembly, resulting in reduced automatic transmission fluid pressure in the transaxle. This condition would illuminate the “Automatic Transmission” (A/T) warning light in the instrument panel and could result in the inability to shift gears or to drive the vehicle, increasing the risk of crash causing injury and/or property damage. Correction: Dealers will inspect and, if necessary, replace the transfer assembly. Note: Only a limited number of 2007 to 2010 model year vehicles equipped with a replacement transfer assembly are included in the recall population.
2014248 · 3,549 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Certain 2013 model year vehicles with a 6-speed automatic transmission may have been manufactured with insufficient clearance between the power steering pressure tube and the bosses on the converter housing of the automatic transaxle. This may cause the power steering pressure tube to rust from abrasive contact between the two components. In the worst case, a pin hole could develop and allow for power steering fluid leakage, which can result in the loss of power steering assist and increase the risk of crash causing injury and/or property damage. Correction: Dealers will replace the power steering pressure tube and return tube. Note: Only a limited number of 2007 to 2012 model year vehicles equipped with a replacement automatic transaxle with the bosses on the converter housing are included in the recall population.
2014247 · 1,635 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Mitsubishi Motors North America, Inc. (Mitsubishi) is recalling certain model year 2013 Outlander vehicles equipped with a 6-speed automatic transmission. Additionally, Mitusbishi is recalling certain 2007-2012 Outlander vehicles that received replacement 6-speed automatic transmissions during servicing. The transmissions in these vehicles have insufficient clearance between the power steering pressure tube and the converter housing of the automatic transmission. As a result of the contact, the power steering pressure tube may develop a hole and leak power steering fluid.
A power steering fluid leak could result in a loss of steering assistance, increasing the risk of a crash.
Mitsubishi will notify owners, and dealers will replace the power steering pressure tube and return tube, free of charge. The recall began in August 2014. Owners may contact Mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is SR-14-006.
14V366000 · 203 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Mitsubishi Motors North America, Inc. (Mitsubishi) is recalling certain model year 2007 and 2009 Outlander vehicles. During servicing, the affected vehicles were repaired with replacement transfer case assemblies whose oil seal may come out of position.
If the oil seal dislodges, automatic transmission fluid (ATF) may enter the transfer case assembly, reducing the ATF pressure in the transmission, resulting in poor transmission shifting or the inability of the vehicle to be driven, increasing the risk of a crash.
Mitsubishi will notify owners, and dealers will replace the transfer assembly, as necessary, free of charge. The recall began on July 30, 2014. Owners may contact Mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is SR-14-005.
14V365000 · 5 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
MITSUBISHI IS RECALLING 21,493 MY 2007-2008 OUTLANDER VEHICLES EQUIPPED WITH LED TYPE STOP LAMPS AND DISTRIBUTED IN THE UNITED STATES AND PUERTO RICO. THE BRAKE LAMP SWITCH MAY MALFUNCTION AND CAUSE THE STOP LAMPS TO NOT ILLUMINATE DURING BRAKE APPLICATION.
THE FAILURE OF THE BRAKE LAMPS TO ILLUMINATE WHEN THE BRAKES ARE APPLIED WILL NOT PROVIDE WARNING TO FOLLOWING TRAFFIC AND COULD RESULT IN A CRASH.
DEALERS WILL REPLACE THE STOP LAMP SWITCH. THE RECALL IS EXPECTED TO BEGIN DURING FEBRUARY 2009. OWNERS MAY CONTACT MITSUBISHI AT 1-800-222-0037.
08V680000 · 21,493 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
MITSUBISHI IS RECALLING 5,400 MY 2007-2008 OUTLANDER PASSENGER VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, IOWA, KENTUCKY, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, VIRGINIA, WEST VIRGINIA, WISCONSIN, AND THE DISTRICT OF COLUMBIA. FOR VEHICLES WITHOUT AN ELECTRIC POWER SEAT, THE FLOOR HARNESS CONNECTOR FOR THE POWER SEAT IS PLACED DIRECTLY ON THE FLOORBOARD UNDERNEATH THE CARPETING (VEHICLES WITH POWER SEATS ALREADY HAVE THE HARNESS ELEVATED). IF A VEHICLE OCCUPANT ENTERS THE VEHICLE WITH A SUFFICIENT AMOUNT OF SNOW ON THEIR FEET CONTAINING ROAD SALT, IT IS POSSIBLE FOR THE MELTED SNOW MIXTURE TO SOAK THE CARPET AND ALLOW THE SALT-WATER SOLUTION TO COME INTO CONTACT WITH THE UNUSED POWER SEAT HARNESS CONNECTOR.
THE CONNECTOR TERMINAL MAY CORRODE AND ALLOW CURRENT TO FLOW, RESULTING IN THE GRADUAL HEATING AND MELTING OF THE CONNECTOR AND MAY RESULT IN A FIRE.
DEALERS WILL RELOCATE THE FLOOR HARNESS FROM BENEATH BOTH THE PASSENGER AND DRIVER SEATS TO ABOVE THE CARPET AND AWAY FROM THE BOTTOM OF THE FLOORBOARD TO PREVENT CONTACT WITH ANY FUTURE MELT SOLUTION. THE RECALL BEGAN ON APRIL 7, 2008. OWNERS MAY CONTACT MITSUBISHI AT 1-800-222-0037.
08V094000 · 5,400 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain vehicles not equipped with the power seat option, the unused harness connector for the power seat feature is placed directly on the floorboard, underneath the carpeting. If a vehicle occupant enters the vehicle with a sufficient amount of snow on their feet containing road salt, it is possible for the melted snow mixture to soak the carpet and allow the salt-water solution to come into contact with the unused power seat harness connector. As a result, the connector terminal may corrode and allow current to flow, resulting in the gradual heating and melting of the connector. This could result in a vehicle fire, causing personal injury or death. Correction: Dealers will relocate the floor harness beneath both the passenger and driver seats to an area above the carpet.
2008063 · 2,206 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer