2010 F-250
- 3
- on the market
- $19,999
- median ask
- $34,099
- from (MSRP)
- 36
- trims
Icon Vehicle Dynamics, LLC (Icon) is recalling all 05-UP FSD 2.5 Centerline Stabilizer Kits with part number 65050. The kits were sold as an accessory for certain 2005-2021 Ford F-250 4X4 and F-350 4X4 pickup trucks. The foam ring inside the stabilizer "through shaft" may block the piston ports, possibly causing the steering to lock up.
If the steering locks, it can increase the risk of a crash.
Icon will notify owners, and dealers will install a new shock assembly with a revised foam ring and steel support disc, free of charge. The recall began December 21, 2020. Owners may contact Icon customer service at 1-951-689-4266.
20E090000 · 102 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
2019420 · 5,327 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain vehicles equipped with diesel engines, service replacement steering gears, installed after June 30, 2014, may not properly mount to the frame rail due to insufficient clearance. This could result in insufficient clamp load on the joints, which over time may cause fatigue of one or more of the steering gear retention bolts. If the steering gear bolts were to fatigue, one or more of the bolts could fracture, which could result in a loss of steering control, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will install spacers between the gear and the frame rail to add clearance and ensure adequate clamp load to the joints.
2015081 · 21 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Certain vehicles may not comply with Canada Motor Vehicle Safety Standard 208 - Occupant Protection in Frontal Impacts. Prescribed text may have been omitted from the airbag warning label in the French language only. As a result, the French-language warning label is more restrictive than the English. Correction: No corrective recall action is required as this technical non-compliance is deemed to be non-safety related.
2014103 · 101,212 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Research other Ford models