1980 Buick Regal
Safety Recalls & Notices
We found 14 safety recalls for the 1980 Buick Regal. Recalls are sourced from both NHTSA (US) and Transport Canada databases. Contact your authorized Buick dealer to schedule free repairs.
Summary
On certain vehicles, excessive enlargement of a pilot hole in the rear brake backing plate could allow the wheel cylinder to rotate possibly leading to loss of brake fluid in the rear brakes and loss of rear braking capability.this Would result in increased stopping distances and possible crash. note: vehicles in ontario and quebec only.
Summary
On certain vehicles, excessive enlargement of a pilot hole in the rear backing plate could allow the wheel cylinder to rotate possibly leading to loss of rear braking action.
Summary
THE AXLE RETAINING "C" CLIP IN THE DIFFERENTIAL MAY DISLODGE AND ALLOW THE AXLE, WHEEL AND BRAKE DRUM TO SEPARATE FROM THE VEHICLE WHEN SUBJECTED TO SIDE FORCES. AXLE SEPARATION COULD RESULT IN LOSS OF VEHICLE CONTROL AND POSSIBLE CRASH.
Summary
On certain vehicles, the heads of the rear seatbelt anchor bolts may break off during normal vehicle use and in the event of an accident in which the rear seatbelts are in use, the probability of injury to the wearer will be increased.
Summary
On certain vehicles, the rear brake backing plates may develop a corrosion condition which could result in loss of rear brake fluid and loss of rear braking capabilities. This recall affects vehicles sold in the Maritime provinces only.
Summary
THESE VEHICLES MAY NOT COMPLY WITH CMVSS 1101 - EMISSION DEVICES.
Summary
On certain vehicles, the lower rear control arm to frame bolts may fracture causing lower control arm to drop free. If this happens vehicle damage or crash without warning may occur.
Summary
THE MAINTENANCE SCHEDULE SPECIFIES A 30,000 MILE (48,000 KM) INTERVAL BETWEEN SPARK PLUG CHANGES INSTEAD OF THE CORRECT 22,500 MILE (36,000KM) INTERVAL. THE INCORRECT INTERVAL IF FOLLOWED MAY AFFECT AIR EMISSION CONTROL PERFORMANCE. THESE VEHICLES DO NOT COMPLY WITH CANADA MOTOR VEHICLE SAFETY STANDARD 1103 - EXHAUST EMISSIONS.
Summary
CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.
Potential Consequence
THIS CONDITION MAY CAUSE INADEQUATE SEALING AND LOSS OF ENGINE OIL, POSSIBLY RESULTING IN A FIRE.
Remedy
HONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075.
Summary
EXCESSIVE ENLARGEMENT OF THE WHEEL CYLINDER PILOT HOLE IN THE REAR BRAKE BACKING PLATE COULD ALLOW THE WHEEL CYLINDER TO ROTATE AND CAUSE LOSS OF BRAKE FLUID. CONSEQUENCE OF DEFECT: A LOSS OF BRAKE FLUID LEADS TO LOSS OF REAR BRAKE ACTION, CREATING THE POTENTIAL FOR AN ACCIDENT. FRONT BRAKES WOULD REMAIN OPERATIONAL.
Remedy
ADD A PART TO PREVENT WHEEL CYLINDER FROM ROTATING.
14 Active Recalls
Requires attention
Buick Regal by Year
1980 Buick Regal Recall FAQs
Common questions about recalls for this vehicle
Related Recall Checks
Browse recall information for the latest model year vehicles.