1986 Buick Regal
Safety Recalls & Notices
We found 7 safety recalls for the 1986 Buick Regal. Recalls are sourced from both NHTSA (US) and Transport Canada databases. Contact your authorized Buick dealer to schedule free repairs.
Summary
A SMALL NYLON BUSHING IN THE CRUISE CONTROL SERVO BAIL (BRACKET) MAY SLIP OUT OF PLACE RESULTING IN POSSIBLE INTERMITTENT INCREASES IN ENGINE SPEED OR DIESELING. THIS CONDITION COULD ALSO CAUSE THE SERVO ROD ASSEMBLY TO WEAR THROUGH THE BALL AND CATCH ON OTHER COMPONENTS POSSIBLY RESULTING IN A STUCK THROTTLE. THIS COULD RESULT IN LOSS OF VEHICLE CONTROL AND A POSSIBLE CRASH. CORRECTION: A BUSHING KIT WILL BE INSTALLED ON THE CRUISE CONTROL SERVO BAIL.
Summary
Certain vehicles equipped with hatchroof option may not comply with CMVSS 210 - Seatbelt Assembly Anchorages. Drivers side shoulder belt anchor plate may be located upside down which can result in the anchor bolt pulling loose in an accident.
Summary
CERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON "DOCUMENT SEARCH" AND THEN "BUS APPLICATIONS"). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE.
Potential Consequence
THIS CONDITION MAY CAUSE AN INADEQUATE SEAL AT THE CONNECTION, POTENTIALLY LEADING TO A FUEL LEAK. IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR.
Remedy
HONEYWELL WILL NOTIFY OWNERS AND REPLACE THE FUEL FILTERS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 18, 2006. OWNERS MAY CONTACT FRAM CUSTOMER SERVICE AT 1-800-890-2075 (OPTION 1).
Summary
A SMALL NYLON BUSHING IN THE CRUISE CONTROL SERVO BAIL MAY SLIP OUT OF PLACE, CAUSING INTERMITTENT AND UNEXPECTED INCREASES IN ENGINE SPEED OR DIESELING (ENGINE RUN ON WITH IGNITION OFF).
Potential Consequence
SERVO ROD ASSEMBLY COULD CATCH ON ENGINE COMPONENTS ANDRESULT IN A STUCK THROTTLE WITH POTENTIAL FOR A VEHICLE CRASH.
Remedy
INSTALL A NEW BUSHING IN CRUISE CONTROL SERVO BAIL.
Summary
UNDER EXTENDED HEADLAMP USAGE, CIRCUITRY IN THE HEADLAMP SWITCH PANEL MIGHT EXPERIENCE INCREASED RESISTANCE AND EXCESSIVE HEAT BUILDUP.
Potential Consequence
HEADLIGHTS WOULD CYCLE ON AND OFF. SUDDEN LOSS OFHEADLIGHTS UNDER SEVERE WEATHER OR NIGHTIMER DRIVING CONDITIONS COULD RESULTIN A VEHICLE CRASH.
Remedy
REPLACE HEADLIGHT SWITCH WITH MODIFIED SWITCH.
Summary
SMALL CRACKS MAY DEVELOP IN THE BODY PILLAR AROUND THE DOOR STRIKER BOLT HOLE.
Potential Consequence
CRACKS WOULD INCREASE LEADING TO DIFFICULTY IN CLOSINGTHE DOOR AND MIGHT ALLOW DOOR TO COME OPEN DURING A CRASH, INCREASINGLIKELIHOOD OF INJURY TO OCCUPANTS.
Remedy
INSTALL INNER AND OUTER REINFORCEMENT PLATE ON BOTH LEFT AND RIGHT BODY PILLARS.
Summary
LEFT HANDED DRIVER'S SIDE SHOULDER BELT ANCHOR PLATE MAY BE UPSIDE DOWN IN LOCK PILLAR SO THAT THE UNTHREADED SLOT OF THE PLATE ALIGNED WITH THE HOLE IN THE LOCK PILLAR. THIS RESULTED IN THE ANCHOR BOLT BEING DRIVEN INTO THE SLOT INSTEAD OF THE THREADED HOLE OF THE ANCHOR PLATE. CONSEQUENCE OF DEFECT: IN A VEHICLE CRASH, BELT ANCHOR BOLT MAY PULL LOOSE FROM ANCHOR PLATE, THUS FAILING TO COMPLY WITH FMVSS 210, SEAT BELT ASSEMBLY ANCHORAGES, AND INCREASES LIKELIHOOD OF INJURY TO OCCUPANT.
Remedy
INSTALL A BOLT ANCHOR PLATE REINFORCEMENT AND NEW BOLT, AS NECESSARY.
7 Active Recalls
Requires attention
Buick Regal by Year
1986 Buick Regal Recall FAQs
Common questions about recalls for this vehicle
Related Recall Checks
Browse recall information for the latest model year vehicles.