1986 Plymouth Horizon
Safety Recalls & Notices
We found 6 safety recalls for the 1986 Plymouth Horizon. Recalls are sourced from both NHTSA (US) and Transport Canada databases. Contact your authorized Plymouth dealer to schedule free repairs.
Summary
THESE VEHICLES MAY EXPERIENCE A REAR SUSPENSION TRAILING ARM TO HANGAR BRACKET PIVOT BOLT FAILURE, WHICH COULD RESULT IN PARTIAL SEPARATION OF THE REAR SUSPENSION FROM THE VEHICLE. THIS COULD RESULT IN LOSS OF VEHICLE CONTROL AND A VEHICLE CRASH WITHOUT PRIOR WARNING. CORRECTION: INVOLVED VEHICLES WILL HAVE BOTH TRAILING ARM PIVOT BOLTS REPLACED WITH PROPERLY PROCESSED BOLTS.
Summary
THESE VEHICLES DO NOT COMPLY WITH C.M.V.S.S. 1103 - EXHAUST EMISSIONS. PLUGGED CHOKE VACUUM DELAY VALVE. NOTE: VEHICLES EQUIPPED WITH 2.2 LITRE CARBURETED ENGINES.
Summary
THESE VEHICLES WERE BUILT WITH A POTENTIALLY DEFECTIVE BATTERY. THE GAS VENTS ON THESE BATTERIES MAY BE PARTIALLY OR COMPLETELY BLOCKED BY PLASTIC FLASHING WHICH COULD CAUSE A BUILD UP OF INTERNAL GAS PRESSURE AND POSSIBLY RESULT IN RUPTURE OF THE BATTERY CASE. THIS COULD BE HAZARDOUS TO PERSONS IN CLOSE PROXIMITY TO THE BATTERY OR UNDER THE VEHICLE WHILE SERVICING. FOUR DOOR ARIES AND RELIANT MODELS ONLY.
Summary
FEDERAL MOGUL IS RECALLING 6,903 AFTERMARKET BALL JOINT ASSEMBLIES SHIPPED BETWEEN NOVEMBER 9, 2007 AND MARCH 26, 2008, WHICH MAY HAVE BEEN PACKAGED WITH INCORRECT NUTS. THE PART NUMBERS PACKAGED WITH INCORRECT NUTS ARE: K7147, K7329, K8683, AND 104353. THESE PARTS WERE MADE FOR USE ON THE VARIOUS VEHICLES LISTED ABOVE.
Potential Consequence
THE NUTS INCLUDED IN THE PACKAGING FOR THESE BALL JOINT ASSEMBLIES ARE MISSING THE INTENDED PREVAILING TORQUE (SELF-LOCKING) FEATURE. IF THE INCORRECT NUT WAS TO BECOME LOOSE, THE JOINING MEMBERS MAY LOOSEN LEADING TO A SEPARATION OF THE BALL JOINT. THIS MAY RESULT IN LOSS OF VEHICLE CONTROL, POSSIBLY RESULTING IN A VEHICLE CRASH.
Remedy
FEDERAL MOGUL WILL NOTIFY OWNERS AND REPLACE THE PARTS FREE OF CHARGE. THE RECALL BEGAN ON MAY 22, 2008. OWNERS CAN CONTACT FEDERAL MOGUL AT 877-489-6659.
Summary
REAR SUSPENSION TRAILING ARM-TO-HANGER BRACKET PIVOT BOLTS MAY FAIL FROM STRESS CORROSION CRACKING POSSIBLY CAUSED BY PROCESSING DEVIATIONS IN THE CONSTRUCTION OF THE PIVOT BOLT.
Potential Consequence
FAILURE OF BOLTS MAY RESULT IN PARTIAL SEPARATION OF THEREAR SUSPENSION FROM THE VEHICLE, RESULTING IN LOSS OF VEHICLE CONTROL WITHOUTWARNING AND A VEHICLE CRASH.
Remedy
REPLACE THE REAR SUSPENSION TRAILING ARM-TO-HANGER BRACKET PIVOT BOLT WITH A PROPERLY PROCESSED BOLT.
Summary
BATTERY CAP VENTS MAY BE PARTIALLY OR COMPLETELY BLOCKED WITH PLASTIC FLASHING. CONSEQUENCE OF DEFECT: A BUILD UP OF INTERNAL GAS PRESSURE COULD OCCUR WHICH COULD RESULT IN CASE RUPTURE, PARTICULARLY DURING POST CHARGING. SHOULD A PERSON BE IN THE VICINITY OF THE BATTERY WHEN THE CASE RUPTURES, THEY MAY BE INJURED BY THE RELEASED GASES AND/OR ACID.
Remedy
REWORK BATTERIES BY PROBING BOTH VENT ORIFICES TO ELIMINATE ANY VENT OBSTRUCTION.
6 Active Recalls
Requires attention
1986 Plymouth Horizon Recall FAQs
Common questions about recalls for this vehicle
Related Recall Checks
Browse recall information for the latest model year vehicles.