1998 Acura Cl

Safety Recalls & Notices

We found 8 safety recalls for the 1998 Acura Cl. Recalls are sourced from both NHTSA (US) and Transport Canada databases. Contact your authorized Acura dealer to schedule free repairs.

Total
8
safety notices
Units
409
vehicles affected
Recent
Jan 21, 2020
last notice date

Summary

Issue: On certain vehicles, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Safety Risk: In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury. Corrective Actions: The company will notify owners by mail. There may be a significant delay before replacement parts are available. The company will send you a second letter once replacement parts are available and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. If the inflator requires replacement, a newly design part will be installed.

Campaign ID:2020014
Units Affected:178
Contact authorized dealer for service

Summary

On certain vehicles, the ignition switch may wear excessively and prevent proper interlock operation, making it possible to turn the ignition key to the off position and remove the key without shifting the transmission to Park. If the vehicle operator does not shift to Park before removing the key and fails to engage the parking brake, the vehicle could roll and a crash could occur. Correction: Dealer will perform the required inspection and necessary repairs.

Campaign ID:2003276
Units Affected:43
Contact authorized dealer for service

Summary

On certain vehicles electrical contacts in the ignition switch can degrade due to the high electrical current passing through the switch when the vehicle is started. Worn contacts could cause the engine to stall without warning, increasing the risk of a crash. Correction: Dealers will replace the ignition switch.

Campaign ID:2002096
Units Affected:188
Contact authorized dealer for service

Summary

Honda (American Honda Motor Co.) is recalling certain 1998 Acura 2.2CL, 1998-1999 Acura 2.3CL, 1998-1999 Acura 3.0CL, 2001 Acura 3.2CL and Acura MDX, 1998-2000 Honda Accord Coupe, Accord Sedan, Civic Sedan, Odyssey and Acura 3.5RL, 1999-2000 Acura 3.2TL, 1996-2000 Civic Coupe, 1997-2000 CR-V, 1997-1998 EV Plus, and 1998-1999 Isuzu Oasis vehicles. These vehicles were equipped with Non-Azide Driver air bag Inflators (NADI) and do not contain phase stabilized ammonium nitrate (PSAN) propellant. Due to a manufacturing issue, the NADI inflators may absorb moisture, causing the inflators to rupture or the air bag cushion to underinflate.

Campaign ID:149380
Component:AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE

Potential Consequence

In the event of a crash necessitating air bag deployment, an inflator rupture may result in metal fragments striking the driver or other occupants. An underinflated air bag cushion may not properly protect the occupant. These scenarios increase the risk of serious injury or death.

Remedy

Honda will notify owners, and dealers will inspect the driver frontal air bag inflator, and replace it if necessary, with an inflator of a different design, free of charge. The recall began October 1, 2020. Owners may contact American Honda's Customer Support & Campaign Center at 1-888-234-2138 or Isuzu customer service at 1-800-255-6727.

Contact authorized dealer for service

Summary

ON CERTAIN PASSENGER VEHICLES AND MINI VANS, THE IGNITION SWITCH MAY WEAR EXCESSIVELY AND PREVENT PROPER INTERLOCK OPERATION, MAKING IT POSSIBLE TO TURN THE IGNITION KEY TO THE "OFF" POSITION AND REMOVE THE KEY WITHOUT SHIFTING THE TRANSMISSION TO "PARK."

Campaign ID:47349
Component:ELECTRICAL SYSTEM:IGNITION:SWITCH

Potential Consequence

IF THE VEHICLE OPERATOR DOES NOT SHIFT TO "PARK" BEFORE REMOVING THE KEY AND FAILS TO ENGAGE THE PARKING BRAKE, THE VEHICLE COULD ROLL AND A CRASH COULD OCCUR.

Remedy

DEALERS WILL PERFORM AN INSPECTION PROCEDURE THAT DETERMINES THE AMOUNT OF CYLINDER BODY WEAR. IF SIGNIFICANT WEAR IS INDICATED, THE DEALER WILL REPLACE THE CYLINDER BODY, COLLAR, AND LATCH PLATE. IF NO SIGNS OF WEAR ARE INDICATED, DEALERS WILL REPLACE THE LATCH PLATE WITH A REDESIGNED PART. OWNER NOTIFICATION BEGAN DECEMBER 8, 2003. OWNERS SHOULD CONTACT HONDA AT 1-800-999-1009 OR ACURA AT 1-800-382-2238.

Contact authorized dealer for service

Summary

ON CERTAIN SEDANS, COUPES, HATCHBACKS, AND SPORT UTILITY VEHICLES, ELECTRICAL CONTACTS IN THE IGNITION SWITCH CAN DEGRADE DUE TO THE HIGH ELECTRICAL CURRENT PASSING THROUGH THE SWITCH WHEN THE VEHICLE IS STARTED.

Campaign ID:43975
Component:ELECTRICAL SYSTEM:IGNITION:SWITCH

Potential Consequence

WORN CONTACTS COULD CAUSE THE ENGINE TO STALL WITHOUT WARNING, INCREASING THE RISK OF A CRASH.

Remedy

DEALERS WILL REPLACE THE IGNITION SWITCH. OWNER NOTIFICATION BEGAN JUNE 14, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HONDA AT 1-800-999-1009 OR ACURA AT 1-800-382-2238.

Contact authorized dealer for service

Summary

VEHICLE DESCRIPTION: PASSENGER VEHICLES. CERTAIN VEHICLES WERE MANUFACTURED WITH BALL JOINTS THAT CAN PREMATURELY WEAR OUT AND, IN THE WORSE CASE, THE BALL JOINT WOULD SEPARATE CAUSING THE FRONT SUSPENSION TO COLLAPSE.

Campaign ID:36932
Component:SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT

Potential Consequence

THIS CONDITION WOULD RESULT IN VEHICLE DECELERATION AND A SUDDEN LOSS OF POWER. ALSO STEERING CONTROLLABILITY WOULD BE REDUCED.

Remedy

DEALERS WILL REPLACE THE FRONT SUSPENSION LOWER BALL JOINTS.

Contact authorized dealer for service

Summary

VEHICLE DESCRIPTION: PASSENGER VEHICLES (HONDA ACCORD SEDANS MANUFACTURED FROM SEPTEMBER 18, 1997 TO JANUARY 10, 1998; COUPES MANUFACTURED DECEMBER 11, DECEMBER 15, 1997, AND JANUARY 5, 1998; ACURA 2.3CL MANUFACTURED OCTOBER 22, 1997 THROUGH JANUARY 7, 1998). DURING MANUFACTURING, THE CASTING DIE CAUSED AN IRREGULARITY IN THE RIGHT-SIDE TRANSMISSION COVER. THIS IRREGULARITY CAN LIMIT THE MOVEMENT OF THE PARKING PAWL ACTUATION LEVEL AND PREVENT ADEQUATE ENGAGEMENT OF THE PARKING GEAR PAWL. THIS DOES NOT COMPLY WITH FMVS NO. 114, "THEFT PROTECTION."

Campaign ID:33514
Component:POWER TRAIN:AUTOMATIC TRANSMISSION:PARK/NEUTRAL START INTERLOCK SWITCH

Potential Consequence

THIS CONDITION CAN CAUSE THE VEHICLE TO ROLL DOWN AN INCLINE WHEN THE TRANSMISSION IS LOCKED IN "PARK," INCREASING THE RISK OF PERSONAL INJURY AND/OR PROPERTY DAMAGE.

Remedy

DEALERS WILL INSTALL A COLLAR ON THE TRANSMISSION PARKING PAWL TO ENSURE PROPER MOVEMENT OF THE ACTUATION LEVER.

Contact authorized dealer for service

8 Active Recalls

Requires attention

Recent Activity
2020
2 recalls
2003
2 recalls
2002
2 recalls
Cardog App Icon

Get the Cardog App

Access your vehicle valuations, market insights, and car research tools on the go. Available for both iOS and Android devices.

Download app

Acura Cl by Year

Important Notice
Contact your dealer to verify recalls for your specific VIN and schedule service.

1998 Acura Cl Recall FAQs

Common questions about recalls for this vehicle

Related Recall Checks

Compare recall history with competitors and alternatives to the 1998 Acura Cl.

1998 BMW MConvertible
1998 BMW M3Convertible
1998 BMW Z3Convertible
1998 Saab 900Convertible
Show 14 more