Safety Recalls & Notices
Requires attention
VOLVO IS RECALLING CERTAIN PASSENGER VEHICLES EQUIPPED WITH POWER FRONT PASSENGER SEATS. THE FRONT SEAT RAIL'S DETECTION SYSTEM WAS MANUFACTURED INCORRECTLY AND MAY PERMIT THE PASSENGER TO FORWARD THE SEAT BEYOND THE INTENDED MAXIMUM.
POSITIONING OF THE SEAT BEYOND THE INTENDED MAXIMUM CAN CAUSE INCREASED RISK OF INJURY TO THE PASSENGER IN THE EVENT OF A CRASH.
DEALERS WILL INSPECT THE FRONT POWER SEAT STOPS FOR BOTH FRONT SEATS FOR THE PRESENCE OF AN "END STOP" AND REPAIR THE VEHICLES AS NECESSARY FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 23, 2010. OWNERS MAY CONTACT VOLVO AT 1-800-458-1552 OR AT CUSTOMERCARE@VOLVOFORLIFE.COM.
On certain vehicles equipped with power front passenger seats, the "end stops" on the seat frame rails may be missing. If the end stops are missing, the maximum allowable seat travel may be exceeded, resulting in an increased injury risk for out of position occupants in the event of a frontal collision. Correction: Dealers will inspect the front seat rails for the presence of an "end stop", and install one if necessary.
VOLVO IS RECALLING CERTAIN VEHICLES EQUIPPED WITH GARMIN 760 PORTABLE GLOBAL POSITIONING SYSTEM (GPS) UNITS BECAUSE THE BATTERIES ON THOSE UNITS MAY OVERHEAT.
AN OVERHEATED BATTERY COULD LEAD TO A FIRE.
VOLVO ADVISES OWNERS TO PLEASE STOP USING THE GARMIN PORTABLE GPS DEVICE IMMEDIATELY, AND VISIT THE GARMIN WEBSITE TO DETERMINE IF THEIR UNIT IS AFFECTED. THE UNIT'S BATTERY WILL BE REPLACED WITH A NEW BATTERY AND A SPACER WILL BE INSERTED ON TOP OF THE BATTERY NEXT TO THE PCB. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON NOVEMBER 18, 2010. OWNERS MAY CONTACT GARMIN AT 866-957-1981 OR VISIT GARMIN'S WEBSITE AT WWW.GARMIN.COM/NUVIBATTERYPCBRECALL.
On certain vehicles, there is a possibility of overheating issues of batteries in the Garmin nüvi® 760 when certain batteries manufactured within a limited date code range are used in certain Garmin nüvi® 760 models with a specific printed circuit board (PCB) design. The interaction of these factors can, in some circumstances, increase the possibility of overheating, which may lead to a fire. Correction: Dealers will direct customers who have an affected unit to the Garmin Web site, which explains how to verify if their units are involved and includes procedures to follow for product exchange.
On certain vehicles, the gearshift lever stud assembly may not have received adequate tighten torque during vehicle assembly. If the gearshift lever cable or stud assembly becomes loose, it may not be possible to engage, disengage, or shift gears. This could result in a crash causing property damage, personal injury, or death. Correction: Dealers will inspect and torque the gearshift lever stud assembly to the correct specification.
Generated by Cardog • December 13, 2025
Safety Recalls & Notices
Requires attention