1988 Mazda 929
Safety Recalls & Notices
We found 5 safety recalls for the 1988 Mazda 929. Recalls are sourced from both NHTSA (US) and Transport Canada databases. Contact your authorized Mazda dealer to schedule free repairs.
Summary
THE (Takata) ABS PLASTIC FRONT SEAT BELT RELEASE BUTTONS ON THESE VEHICLES MAY BREAK ALLOWING PLASTIC PIECES TO FALL INTO THE BUCKLE ASSEMBLY. IF THIS SHOULD HAPPEN, A NO LATCH, FALSE LATCH OR FAILURE TO UNLATCH CONDITION COULD OCCUR CREATING THE RISK OF PERSONAL INJURY IN THE EVENT OF A CRASH OR SUDDEN STOP. CORRECTION: FRONT SEAT BELT BUCKLES WILL BE REPAIRED OR REPLACED AS NECESSARY.
Summary
NOTE: 626 - 16,682 UNITS. 929 - 3,001 UNITS. THE FRONT OUTER DOOR HANDLES CAN PREMATURELY FAIL AT THE POINT WHERE THE HANDLE CONNECTS TO THE ROD THAT ACTIVATES THE DOOR LOCK. IF THE ROD WERE TO FALL INBOARD INTO THE PATH OF THE WINDOW GLAZING, LOWERING THE WINDOW COULD RESULT IN PRESSURE ON THE ROD AND COULD CAUSE THE DOOR TO INADVERTENTLY OPEN IF UNLOCKED. CORRECTION: A SAFETY SHIELD WILL BE INSTALLED BETWEEN THE OUTER SURFACE OF THE WINDOW GLAZING AND THE DOOR HANDLE OPERATING MECHANISM.
Summary
THESE VEHICLES MAY NOT COMPLY WITH C.M.V.S.S. 1105 - EVAPORATIVE EMISSIONS. V.I.N. RANGE - JM1HC2210J0100001 TO JM1HC2216J0113013
Summary
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
Potential Consequence
THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.
Remedy
OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN.
Summary
RESIN MOLDED FRONT HANDLES FAIL AT THE DOOR LATCH ACTUATING ROD ATTACHMENT, FREEING THE ROD TO FALL INSIDE THE DOOR FRAME. SUBSEQUENT LOWERING OF THE ASSOCIATED WINDOW MAY FORCE THE ACTUATING ROD DOWNWARD AND RELEASE THE DOOR LATCH.
Potential Consequence
INADVERTENT ACTUATION OF THE DOOR LATCH CAUSES THE DOORTO OPEN UNEXPECTEDLY WHICH COULD RESULT IN AN OCCUPANT FALLING OUT OF THEVEHICLE.
Remedy
DEALERS WILL REPLACE THE DOOR HANDLE/LATCH ASSEMBLY.
5 Active Recalls
Requires attention
Mazda 929 by Year
1988 Mazda 929 Recall FAQs
Common questions about recalls for this vehicle
Related Recall Checks
Compare recall history with competitors and alternatives to the 1988 Mazda 929.