2000 Ford Explorer
Safety Recalls & Notices
We found 27 safety recalls for the 2000 Ford Explorer. Recalls are sourced from both NHTSA (US) and Transport Canada databases. Contact your authorized Ford dealer to schedule free repairs.
Summary
Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
Summary
On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The condition may occur either when the vehicle is parked or when it is in operation. Correction: Dealers will install a new switch or fused wiring harness. Note: This is an expansion of recall 2005028 (05S28) for vehicles not previously included in the campaign.
Summary
On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The failure mode appears to be different than that of Recall 2005028 (05S28). This time, the concern is with long term durability performance issues causing the switch to fail. Correction: Initially as an interim repair, owners will be instructed to return their vehicles to their dealers to have the speed control deactivation switch disconnected. As soon as replacement parts are available, owners will be instructed to return to the dealers for installation of a fused wiring harness designed to eliminate the potential risk of fire.
Summary
On certain Explorer, Explorer Sport and Explorer Sport Trac vehicles, the upper bolt on the driver's high back seat that attaches the seat recliner mechanism to the seat back frame could fracture. If this happens, the seat back may recline until it makes contact with an object behind the seat, such as the 2nd row seat cushion. The occupant could potentially lose contact with the steering wheel or foot pedals during such an event. Correction: Dealer will replace the driver's seat upper bolt.
Summary
On certain Explorer, Explorer Sport and Explorer Sport Trac vehicles, the upper bolt on the driver's high back seat that attaches the seat recliner mechanism to the seat back frame could fracture. If this happens, the seat back may recline until it makes contact with an object behind the seat, such as the 2nd row seat cushion. The occupant could potentially lose contact with the steering wheel or foot pedals during such an event. Correction: Dealer will replace the driver's seat upper bolt.
Summary
On certain Explorer, Explorer Sport and Explorer Sport Tract vehicles, the speed control cable strand cover could impact the conduit end fitting during speed control engagement. Repeated instance of this may result in flaring the cover end causing a binding condition when speed control is disengaged. Drivers may experience a high idle or a condition where it would appear speed control would not disengage. Braking function would be maintained though stopping distances may be increased. Correction: Dealer will replace the speed control cable.
Summary
On certain vehicles, the Powertrain Control Module may allow the vehicle to exceed the design intent top speed. At these extreme speeds. the vehicle may be capable of exceeding the speed rating of the tires. This could lead to tire failure and at these extreme speeds, may result in a crash. Correction: Powertrain Control Module will be reprogrammed with the latest calibration.
Summary
Certain Explorer Sport, Explorer Sport Trac, Rander Edge and Ranger XLT vehicles may have a wire formed hood striker that may be susceptible to fatigue fractures. If the hood striker fractures, the hood may fly open while the vehicle is being driven. A hood fly-up while the vehicle is being operated may result in resuced driver visibility and, potentially, a vehicle crash. Correction: Hood striker will be replaced with a revised hood striker.
Summary
Certain vehicles do not comply with the requirements C.M.V.S.S. 209 - Seat Belt Assemblies. The seat belt assemblies may not withstand the force requirements of the standard. In a crash, if the belt buckle fails, there is an increased risk of injury to the occupant. Correction: Belt buckle assemblies will be inspected and replaced if necessary.
Summary
Certain vehicles have a revised level side crash sensor that may deploy the side airbag if the ignition is in the "run" position and the seat belt webbing is forcibly extracted from a locked retractor with a jerking motion. If the side airbag deploys unexpectedly, it could potentially result in personal injury. Correction: Side crash sensors will be replaced with a revised design version which will reduce the likelihood of an unexpected side airbag deployment.
27 Active Recalls
Requires attention
Ford Explorer by Year
2000 Ford Explorer Recall FAQs
Common questions about recalls for this vehicle
Related Recall Checks
Compare recall history with competitors and alternatives to the 2000 Ford Explorer.