Dodge · 1995–2014
Avenger Recalls
21 known recalls affecting the Dodge Avenger (1995–2014). Enter your VIN to check if your specific vehicle is affected, or browse by model year below.
Dodge Avenger Recalls
Summary
Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
Summary
On certain vehicles, there could be an electrical condition within the Occupant Restraint Control ("ORC") module. This may result in the airbag warning lamp illuminating, and the active head restraints not to deploy during certain rear impact collisions, which could increase the risk of injury to front seat occupants. Correction: Dealers will inspect the ORC part number and replace the ORC if necessary. Note: Vehicles that have been previously repaired with the updated ORC under recall 2016-448 will not require repairing under this recall campaign.
Summary
On certain vehicles in certain types of crashes, airbag and seatbelt pretensioner deployment capability may be lost due to a short in the front impact sensor wiring affecting Occupant Restraint Controller function. Failure of airbags and seatbelt pretensioners to deploy in a crash (when warranted) could increase the risk of injury. Correction: Dealers will replace the Occupant Restraint Controller module.
Summary
Certain vehicles equipped with a 2.4L gasoline engine may experience a loss of engine oil pressure and subsequent engine failure, causing a loss of motive power. A loss of motive power, in conjunction with driving conditions and driver reactions, could increase the risk of a crash. Correction: Dealers will replace the balance shaft module.
Summary
On certain vehicles, the airbag warning lamp may illuminate due to an electrical fault within the Occupant Restraint Control (ORC) module. As a result, the Active Head Restraints (AHR) may not deploy during a rear impact collision (where deployment is warranted), which could increase the risk of personal injury to the front seat occupants. Correction: Dealers will reprogram the Totally Integrated Power Module (TIPM) or replace the ORC module, as required.
Summary
Certain vehicles may experience fuel leakage or engine stall due to a broken control valve in the fuel tank assembly. Engine stalling would result in lost vehicle propulsion which, in conjunction with traffic and road conditions, and the driver’s reactions, could increase the risk of a crash. Fuel leakage, in the presence of an ignition source, could result in a fire. These issues could result in property damage and/or personal injury. Correction: Dealers will inspect the control valve in the fuel tank. If the control valve is damaged, the fuel tank assembly and vapour canister will be replaced.
Summary
Certain vehicles may have been built with a missing or incorrectly installed steering column pivot rivet. A steering column with a miss-installed rivet may not perform as intended in the event of a crash, which may increase the risk of personal injury. Correction: Dealers will inspect for steering column rivet presence and alignment, and repair as required.
Summary
Certain vehicles may experience a separation at the crimped end of the power steering pressure hose assembly, resulting in power steering fluid leakage which could cause a fire. Correction: Dealers will inspect and, if necessary, replace the power steering pressure hoses.
Summary
On certain vehicles, the brake booster input rod may have been installed without the retaining clip, or in some cases, with an improperly formed retaining clip. Should the input rod separate from the assembly it could lead to a loss of brakes, which could result in a vehicle crash causing property damage, personal injury or death. Correction: Dealers will install or replace the retaining clips.
Summary
On certain vehicles, a broken solder joint on the printed circuit board of the Power Control Module (PCM) can affect the fuel pump relay performance and potentially result in an engine stall while driving and/or a no start of the engine. Engine stalling would result in lost propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash. Correction: Dealers will replace the PCM.
Showing 1-10 of 21 recalls
Related Recall Checks
Check recalls for specific Dodge Avenger model years