Jeep
Wagoneer

On 2/11/2025 while at a stop light the vehicle stalled and I had to restart the vehicle when the light turned green. An hour later it happened again. At that point my husband and I took my Wagoneer to the dealership. They determined the vehicle needed a new battery. Then on 2/13/2025 I went to my vehicle in the garage and it had "bricked out". I could not start it at all. I had to have a tow truck bring the vehicle back to the dealership and they again replaced the battery. On 11/26/2025 again while at a stop light the vehicle stalled and I had to restart the vehicle when the light turned green. A little while later on the same day I was at a stop light and I felt the vehicle start to stall, but the light turned green so I stepped firmly on the gas and the vehicle hesitantly went forward. This issue is recurring despite the dealership's efforts to address it.

Hi, I need to bring my 2022 Wagoneer back in for service. I was just in the shop a few days ago for a persistent check engine light, and the issue has returned. The check engine light came back on four days after I picked up the vehicle. This morning the vehicle stalled twice at a complete stop. The front headlights flickered and the engine shut off, but the electronics inside stayed on. I had to press the Start button to restart the engine. I also received a “Start/Stop Unavailable” message. Because this is now a repeat failure, combined with a safety-related stall, I need the vehicle fully rechecked for: ESS/Start-Stop system malfunction Auxiliary battery condition Battery current sensor BMS/charging system PCM software updates Any TSBs related to stalling or ESS on the 2022 Wagoneer Please document this as a repeat repair attempt, and if needed, I would like this escalated to a Stellantis Case Manager since the issue is safety-related and occurred immediately after a previous repair. Please let me know the earliest available appointment. Thank you.

I was driving down the road at 35 MPH when the Service Electric Power Steering (EPS) Message On Instrument Cluster came on. Then when I stopped the brakes were hard to deploy. I tried to reset it by turning it off and on. I had just replaced the backup batter several months back so i don't think that is it. i called the Dealership and told them I talked to Stellantis and they gave me the star online publication case number S2523000053 Rev A. on how to fix it. They said it would be several days and i would need to have it towed on my own. This a systemic problem with these vehicles I have had to pay for a recall because they said it didn't to apply to a Canadian vehicle even though it was made in Detroit. I bought it with a few thousand miles on it and have had nothing but trouble with it and a dealership that always says I would have to pay since it was Canadian. Either the screen is going black or some kind of warning on the dash it seems like every other month.

On September 4th, 2025, my wife and I purchased a 2022 Jeep Wagoneer Series II bearing VIN number [XXX] being sold by Carvana. On September 23rd, 2025, the Jeep Wagoneer was delivered to our residence by Carvana. The Carvana employees unloaded the Jeep Wagoneer from their tow truck and then parked the Wagoneer in our driveway. After the Carvana employees departed with our Ford Explorer, my wife and I decided to take the Wagoneer for a drive. We loaded our three children into the vehicle and my wife drove, while I remained in the front passenger seat. We traveled approximately one block away from our residence when we came to a stop at a stop sign and the Wagoneer turned off its ignition on its own and put itself into park. We were on a slight incline and the vehicle began to roll backwards under no power, but due to the incline. To prevent this, my wife pressed the brake pedal and the vehicle ceased moving. The only way we were to get the ignition running again was to restart the vehicle by pressing the ignition push-button. The vehicle restarted and there were two error messages that appeared on the instrument cluster. The first message indicated that the start/stop system was unavailable. The second error message indicated that the hood was open. We left the stop sign, in an attempt to return to our residence, where the mechanical failure occurred and then came to a traffic signal that was red on U.S. Highway 11, in three lanes of traffic. We came to a stop and the same mechanical error occurred yet again with the Wagoneer turning itself off and shifting itself into park. My wife restarted the ignition and the same two error messages appeared on the instrument cluster. This time the “check engine” light came on. We also determine there to be heavy thumping in the brake pedal when pressing the brakes. During this first drive in the Wagoneer, my wife adjusted the rear-view mirror and the rear-view mirror fell right off the windshield. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

I was stopped at a red light, stacked about 10 cars deep.  Once the light turned green, I pressed the gas pedal, but the auto start-stop feature malfunctioned and turned the car completely off.  I then pressed the button to reactivate the ignition, and pressed the gas pedal again.  After moving forward a few car lengths (or more), the computer engaged the emergency brake and clamped down on the wheels. I was then rear-ended at about 15-20mph.

This vehicle is not equipped with an Auto High Beam feature. The result of this is that when the Headlights are in Auto Mode, the Manual control of the High Beams is disabled. Most people leave their headlights in Auto mode to ensure that they dont forget to turn them on or off, but then the high beams are inoperable. This can pose a significant safety concern when you consider that when someone is driving and needs the use of the high beams they have to take their eyes off the road to fumble around with the headlight dial so they can turn it to manual to enable the use of the high beams.

On 8/22/25 I was driving on the Interstate and attempted to set my cruise at 74 mph. After turning the cruise on and reaching the speed of 74 mph, I pressed the "set+" button. Almost immediately the car sped forward and within seconds I had reached the speed of 83 mph. I applied the brakes and looked down to see the cancelled cruise speed of 100 on my screen. I turned the cruise off and then back on. I was then able to successfully set the cruise at 74 mph. On 9/25/25 I was driving on the highway. I attempted to set my cruise at 56 mph. After turning on the cruise and reaching my desired speed, I pressed the "set+" button. Immediately the car sped forward and before I had a chance to react the car was going 65 mph. I applied the brakes and looked down to see the cancelled cruise speed of 100 on my screen. I turned the cruise off and back on. I pressed the "set+" button when I was going 56 mph and I immediately noticed that the cruise had set itself to 70 mph so I applied the brakes, turned the cruise off and back on. This time after pressing the "set+" button the cruise set itself at 60 mph. I applied the brakes, turned the cruise off and back on. On the 4th try, after pressing the "set+" button the cruise speed remained set at 56 mph.

While driving i lost all power steering and the lane departure lights and power steering alarms came on.