Newest first. Many cover only part of a model year, so check your VIN with Mitsubishi before booking a repair.
Transport Canada · listed for this model year
Certain vehicles, operated in areas where road salts are frequently used in winter, may be exposed to road debris (mud) mixed with road salt. This material can become trapped between a reinforcing bracket and the fuel filler pipe, potentially causing corrosion. Over time, corrosion could create a leak in the fuel filler pipe that could result in fuel leakage when fueling the vehicle. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will replace the fuel filler pipe of vehicles equipped with the first-generation version. Vehicles assembled with the second-generation filler pipe will be inspected and, if severe corrosion on the fuel filler pipe is observed, the pipe will be replaced with a third-generation version. For vehicles where corrosion of the fuel filler pipe is not observed, an anti-corrosion wax-like material will be applied to the filler pipe, and the inner wheel well shield will be replaced with an updated part that provides improved protection against mud intrusion and accumulation. ** Note: This recall supersedes recall 2010050.**
2011012 · 4,969 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Certain vehicles, operated in areas where road salts are frequently used in winter, may be exposed to road debris (mud) mixed with road salt. This material can become trapped between a reinforcing bracket and the fuel filler pipe, potentially causing corrosion. Over time, corrosion could create a leak in the fuel filler pipe that could result in fuel leakage when fueling the vehicle. This situation may result in a fire causing property damage, personal injury or death. Correction: Dealers will replace the fuel filler pipe and associated parts with new, improved parts. Note: This recall is superseded by recall 2011012.
2010050 · 1,242 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain vehicles, the ignition key interlock cable may allow the interlocking cam to fall forward and allow the ignition key to be removed from the ignition when the gearshift mechanism is not in the PARK position. If the driver does not shift to PARK before removing the key, and fails to engage the parking brake, the vehicle could roll and a crash could occur. This could result in property damage, personal injury or death. Correction: Dealers will affect repairs.
2008100 · 4,353 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain vehicles, the parking brake pedal cable lock nut may not have been tightened to the proper torque specification during assembly. The lock nut may loosen and come off, which will reduce the effectiveness of the parking brake. This condition could allow the vehicle to roll if the automatic transmission is not placed into the PARK position. Correction: Dealers will tighten the lock nut.
2005047 · 1,376 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain vehicles, the retaining bolts that attach the propeller shaft to the center bearing flange and/or the rear differential flange may be missing, not sufficiently tightened or over tightened. If the retaining bolts were to fall out, the drive to the rear wheels may be interrupted. In the worst case, the drive shaft may fall down, increasing the potential for a vehicle crash. Correction: Dealers will install new retaining bolts.
2004254 · 878 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain vehicles, the rear foot of the driver's side seat bracket may develop a crack, resulting in reduced strength of the seat anchorage. In the event of a crash, the seat could become detached, increasing the risk of occupant injury. Correction: Dealers will inspect the driver's seat bracket to determine whether it requires replacement.
2004253 · 3 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
United States records (NHTSA) · 6
These are NHTSA campaigns for 2004 Mitsubishi Endeavor vehicles sold in the United States. They are not Canadian recalls: NHTSA's VIN lookup has no Canadian data, and a US campaign may have no Canadian counterpart, or one under a different number covering different vehicles. For a vehicle sold in Canada, go by the Transport Canada listing above and Mitsubishi's Canadian VIN lookup.
MITSUBISHI IS RECALLING CERTAIN MODEL YEAR 2004-2010 ENDEAVOR VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, IOWA, KENTUCKY, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, VIRGINIA, WEST VIRGINIA, WISCONSIN, AND WASHINGTON D.C. COLD STATES INCLUDE NORTH DAKOTA, SOUTH DAKOTA, NEBRASKA, KANSAS, OKLAHOMA, COLORADO, WYOMING, MONTANA, IDAHO, WASHINGTON, OREGON, AND UTAH. ADJOINING STATES INCLUDE ARKANSAS, TENNESSEE, AND NORTH CAROLINA. IN SEVERE CORROSIVE ENVIRONMENTS WHERE ROAD SALTS ARE FREQUENTLY USED IN WINTER VEHICLES MAY BE EXPOSED TO ROAD DEBRIS (MUD) MIXED WITH ROAD SALT. THIS MATERIAL CAN BECOME TRAPPED BETWEEN A REINFORCING BRACKET AND THE FUEL FILLER PIPE, POTENTIALLY CAUSING CORROSION. OVER TIME, CORROSION COULD CREATE A LEAK IN THE FUEL FILLER PIPE THAT COULD RESULT IN A FUEL LEAKAGE WHEN FUELING THE VEHICLE.
FUEL LEAKAGE, IN THE PRESENCE OF AN IGNITION SOURCE, COULD RESULT IN A FIRE.
DEALERS WILL REPLACE THE FUEL FILLER PIPE WITH A NEW IMPROVED PART FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE JULY 5, 2010. OWNERS MAY CONTACT MITSUBISHI AT 1-800-222-0037.
10V065000 · 108,147 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
MITSUBISHI IS RECALLING 120,000 MY 2004-2006 ENDEAVOR PASSENGER VEHICLES. DURING VEHICLE USE, THE IGNITION KEY INTERLOCK CABLE (WHICH IS A COMPONENT OF THE INTERLOCK SYSTEM) MAY ALLOW THE INTERLOCKING CAM TO FALL FORWARD AND ALLOW THE IGNITION KEY TO BE REMOVED FROM THE IGNITION SWITCH WHEN THE GEARSHIFT MECHANISM IS NOT IN THE PARK POSITION.
IF THE DRIVER DOES NOT SHIFT TO PARK BEFORE REMOVING THE KEY AND FAILS TO ENGAGE THE PARKING BRAKE, THE VEHICLE COULD ROLL AND A CRASH COULD OCCUR.
DEALERS WILL INSPECT AND CORRECT THESE VEHICLES FOR THE REPORTED CONDITION. THE RECALL WILL BEGIN ON JULY 7, 2008. OWNERS MAY CONTACT MITSUBISHI AT 1-888-648-7820.
08V139000 · 116,600 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
ON CERTAIN SPORT UTILITY VEHICLES, THE PARKING BRAKE PEDAL CABLE LOCK NUT MAY NOT HAVE BEEN TIGHTENED TO THE PROPER TORQUE SPECIFICATION. THE LOCK NUT MAY LOOSEN AND COME OFF, WHICH WILL REDUCE THE EFFECTIVENESS OF THE PARKING BRAKE.
THIS CONDITION COULD ALLOW THE VEHICLE TO ROLL IF THE TRANSMISSION IS NOT PLACED INTO THE "PARK" POSITION AND THE VEHICLE IS PARKED ON A SLOPE, THUS RAISING THE POSSIBILITY OF A CRASH.
DEALERS WILL INSPECT AND TIGHTEN THE PARKING BRAKE CABLE LOCK NUT, IF NECESSARY FREE OF CHARGE. THE RECALL BEGAN FEBRUARY 24, 2005. OWNERS MAY CONTACT MITSUBISHI AT 1-800-222-5500.
05V069000 · 65,436 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
CERTAIN PASSENGER VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, 'OCCUPANT CRASH PROTECTION.' THE BILINGUAL ENGLISH/SPANISH REMOVABLE AIR BAG WARNING LABELS AFFIXED TO THE DASH AND TO THE SUNVISOR DO NOT MEET THE SIZE REQUIREMENTS OF THE STANDARD.
THIS DOES NOT MEET THE REQUIREMENTS OF THE STANDARD.
MITSUBISHI CARIBBEAN WILL MAIL A CUSTOMER NOTIFICATION LETTER CONTAINING A WRITTEN DESCRIPTION AND A GRAPHIC OF THE BI-LINGUAL DASHBOARD AIR BAG WARNING LABEL. IN ADDITION, ALL CURRENT 2000-2004 NATIVA OWNERS WILL ALSO RECEIVE REPLACEMENT AIR BAG ALERT LABELS FOR THE SUN VISORS. THIS RECALL IS EXPECTED TO BEGIN DURING MARCH OR APRIL 2005. THE NOTIFICATION TO THE NATIVA OWNERS IS EXPECTED TO BEGIN DURING APRIL OR MAY 2005. OWNERS SHOULD CONTACT MITSUBISHI CARIBBEAN AT 1-787-251-8715.
04V428000 · 100,432 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
ON CERTAIN VEHICLES, THE FOOT OF THE DRIVER'S SIDE SEAT RISER MAY DEVELOP A CRACK, RESULTING IN REDUCED STRENGTH OF THE SEAT ANCHORAGE.
IN THE EVENT OF A CRASH, THE SEAT COULD BECOME DETACHED, INCREASING THE RISK OF OCCUPANT INJURY.
DEALERS WILL INSPECT THE DRIVER'S SEAT BRACKET TO DETERMINE WHETHER IT REQUIRES REPLACEMENT. IF SO, THE DEALER WILL REPLACE IT WITH A NEW, IMPROVED PART. THE RECALL BEGAN ON JULY 26, 2004. OWNERS SHOULD CONTACT MITSUBISHI AT 1-888-648-7820.
04V279000 · 1,211 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
CERTAIN SPORT UTILITY VEHICLES MAY HAVE BEEN EQUIPPED WITH DEALER-INSTALLED TRAILER HITCH WIRING HARNESS AND CONTROL MODULE. THE ELECTRONIC CONTROL MODULE CAN OVERHEAT.
OVERHEATING OF THE TRAILER HITCH WIRING HARNESS MODULE COULD RESULT IN A FIRE.
OWNERS ARE BEING REQUESTED TO STOP USING THE HARNESS UNTIL A NEWLY DESIGNED REPLACEMENT IS PROVIDED AND CAN BE INSTALLED BY THE DEALER. THE RECALL BEGAN ON MAY 28, 2004. OWNERS SHOULD CONTACT MITSUBISHI AT 1-888-648-7820.
04V197000 · 2,175 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
2004 Mitsubishi Endeavor recall questions
Transport Canada lists 6 recalls for the 2004 Mitsubishi Endeavor model year. That counts campaigns naming this model year, not recalls on your vehicle: many cover only a VIN range or production window, and some only vehicles found on inspection. NHTSA lists 6 United States campaigns for the US-market model, shown separately; a US campaign may have no Canadian equivalent.
Enter your VIN in Mitsubishi's Canadian recall lookup, or call a Mitsubishi dealer with your VIN. In Canada the manufacturer is responsible for showing recall and repair status for each VIN, so its lookup is the authoritative answer. Cardog uses your VIN only to find the model year; the recalls shown here are listed for that model year and are not matched to your VIN.
Not necessarily. NHTSA campaigns cover vehicles sold in the United States, and NHTSA's VIN lookup has no Canadian data. When a defect also affects Canadian vehicles, the manufacturer files a separate notice with Transport Canada, often under a different number and sometimes covering a different set of vehicles. For a Canadian vehicle, go by the Transport Canada listing and Mitsubishi's Canadian lookup.
Safety recall repairs are normally done at no charge by an authorized Mitsubishi dealer. The manufacturer's notice for each campaign sets out the remedy and any conditions, so confirm with the dealer when you book.
Once Mitsubishi's lookup or a dealer confirms a recall applies, book the repair with an authorized Mitsubishi dealer and bring your VIN. If the manufacturer's notice says not to drive the vehicle or to park it outside, follow that instruction. Parts can take time, so book early.
Follow the manufacturer's notice for that recall. Most allow normal driving until the repair; some tell owners to stop driving or to park outside until it is fixed. Cardog does not grade recalls by severity: the manufacturer's notice and your dealer are the source.
Manufacturers must notify owners they have on record. If you bought the vehicle used or have moved, update your details with Mitsubishi Canada so notices reach you, and check the manufacturer's lookup from time to time.
Related recall checks
Compare recall listings with alternatives to the 2004 Mitsubishi Endeavor.