Newest first. Many cover only part of a model year, so check your VIN with Mazda before booking a repair.
Transport Canada · listed for this model year
Issue: On certain vehicles equipped with LED daytime running lights (DRLs), the wrong material was used for the gasket that seals the wiring connector. As a result, the gasket material could cause corrosion of the circuit board. This could cause one or both of the DRLs to flicker and/or fail. Safety Risk: Daytime running lights that do not work could make the vehicle less visible to others and increase the risk of a crash. Corrective Actions: Mazda Canada will notify owners by mail and instruct you to take your vehicle to a dealer for an inspection. Dealers will replace the sealing gasket and add an anti-corrosion material inside the headlights, as necessary. Dealers may also replace the headlight units if they have failed due to this problem.
2020040 · 6,983 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain vehicles, the anti-corrosion treatment of the outer tube of the rear lift gate stay may be insufficient. Over time, the outer tube of the rear lift gate stay may corrode and break off, which could increase the risk of injury. Correction: Dealers will replace both rear door stays.
2016431 · 183,808 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain vehicles, the nut and bolt holding the strut assembly to the knuckle may not have been tightened properly during the manufacturing process. Over time, this could cause the strut assembly to separate from the knuckle, resulting in a loss of steering control which would increase the risk of a crash causing injury and/or damage to property. Correction : Dealers will inspect and replace the nut and bolt holding the strut assembly to the knuckle if found loose.
2016152 · 220 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
United States records (NHTSA) · 5
These are NHTSA campaigns for 2016 Mazda CX-5 vehicles sold in the United States. They are not Canadian recalls: NHTSA's VIN lookup has no Canadian data, and a US campaign may have no Canadian counterpart, or one under a different number covering different vehicles. For a vehicle sold in Canada, go by the Transport Canada listing above and Mazda's Canadian VIN lookup.
Mazda North American Operations (Mazda) is recalling certain 2016 CX-5 vehicles. The LED Daytime Running Lights (DRL) may fail while driving.
If the DRL fails, the vehicle's visibility may be reduced to other drivers on the road, increasing the risk of a crash.
Mazda will notify owners, and dealers will inspect the headlights, and replace the sealing gasket or headlight assemblies, as necessary, free of charge. The recall began March 20, 2020. Owners may contact Mazda customer service at 1-800-222-5500 Option 4. Mazda's number for this recall is 4320A.
20V063000 · 36,761 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15, 2011, to December 26, 2015. On the affected vehicles, the lift gate support struts may corrode, possibly causing the struts to break and/or the lift gate to drop unexpectedly.
If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.
Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began April 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9916H.
16V644000 · 580,455 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Mazda North American Operations (Mazda) is recalling certain model year 2016 CX-3 vehicles manufactured June 1, 2015, to December 2, 2015, 2013-2014 Mazda2 vehicles manufactured July 3, 2013, to August 8, 2014, 2014-2016 CX-5 vehicles manufactured January 19, 2013, to December 2, 2015, and 2013-2015 CX-9 vehicles manufactured December 6, 2012, to July 31, 2015. The lower mounting nuts and bolts that attach the front strut assembly to the steering knuckle may loosen, allowing the steering knuckle to separate.
If the steering knuckle separates from the strut assembly, it can cause a loss of steering control, increasing the risk of a crash.
Mazda will notify owners, and dealers will inspect the lower mounting nuts and bolts that secure the front strut assembly to the steering knuckle. If the bolts are loose, they will be replaced and then correctly tightened, free of charge. The recall is expected to begin May 20, 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9316D.
16V203000 · 578 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Mazda North American Operations (Mazda) is recalling certain model year 2014-2016 Mazda CX-5 vehicles manufactured June 27, 2013, to February 2, 2016. The affected vehicles have a fuel filler pipe that may rupture in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 301, "Fuel System Integrity."
A rupture of the fuel filler pipe may result in a fuel leak, increasing the risk of a fire.
Mazda will notify owners, and dealers will alter the attachment between the fuel filler pipe and the left rear side of the bracket of the fuel filler pipe, free of charge. The recall began on February 25, 2016. Owners may contact Mazda customer service at 1-800-222-5500, option 6. Mazda's number for this recall is 9216B.
16V064000 · 268,799 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Pilkington North America, Inc. (Pilkington) is recalling certain replacement windshields, model FW04026 GTY, manufactured November 23, 2015, to December 16, 2015 for use in Mazda CX-5 vehicles that are equipped with the Smart City Brake Support system. The affected windshields have a bracket mounted on the inside to hold a laser sensor or LIDAR device for the Smart City Brake Support system. These brackets were improperly affixed with only tape instead of tape and urethane and therefore may loosen.
If the bracket loosens or detaches from the windshield, the safety features of the Smart City Brake Support system may be disabled and therefore increase the risk of a crash.
Pilkington will contact the wholesalers and retailers that purchased the windshields to try to identify the affected customers. The affected windshields will be replaced, free of charge. This recall began on February 15, 2016. Owners may contact Pilkington at 1-844-278-7230.
16E002000 · 193 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
2016 Mazda CX-5 recall questions
Transport Canada lists 3 recalls for the 2016 Mazda CX-5 model year. That counts campaigns naming this model year, not recalls on your vehicle: many cover only a VIN range or production window, and some only vehicles found on inspection. NHTSA lists 5 United States campaigns for the US-market model, shown separately; a US campaign may have no Canadian equivalent.
Enter your VIN in Mazda's Canadian recall lookup, or call a Mazda dealer with your VIN. In Canada the manufacturer is responsible for showing recall and repair status for each VIN, so its lookup is the authoritative answer. Cardog uses your VIN only to find the model year; the recalls shown here are listed for that model year and are not matched to your VIN.
Not necessarily. NHTSA campaigns cover vehicles sold in the United States, and NHTSA's VIN lookup has no Canadian data. When a defect also affects Canadian vehicles, the manufacturer files a separate notice with Transport Canada, often under a different number and sometimes covering a different set of vehicles. For a Canadian vehicle, go by the Transport Canada listing and Mazda's Canadian lookup.
Safety recall repairs are normally done at no charge by an authorized Mazda dealer. The manufacturer's notice for each campaign sets out the remedy and any conditions, so confirm with the dealer when you book.
Once Mazda's lookup or a dealer confirms a recall applies, book the repair with an authorized Mazda dealer and bring your VIN. If the manufacturer's notice says not to drive the vehicle or to park it outside, follow that instruction. Parts can take time, so book early.
Follow the manufacturer's notice for that recall. Most allow normal driving until the repair; some tell owners to stop driving or to park outside until it is fixed. Cardog does not grade recalls by severity: the manufacturer's notice and your dealer are the source.
Manufacturers must notify owners they have on record. If you bought the vehicle used or have moved, update your details with Mazda Canada so notices reach you, and check the manufacturer's lookup from time to time.
Related recall checks
Compare recall listings with alternatives to the 2016 Mazda CX-5.