Safety Recalls & Notices
We found 34 safety recalls for the 2005 Honda Accord. Recalls are sourced from both NHTSA (US) and Transport Canada databases. Contact your authorized Honda dealer to schedule free repairs.
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Note: This is a new recall campaign that includes vehicles that had an airbag inflator replaced under a previous recall or had a replacement airbag installed. The previous recall provided an interim (short-term) repair. Interim repair parts must be replaced with the final repair parts provided in this recall. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Owners will be notified by mail and instructed to take their vehicle to a dealer to replace the driver and/or passenger-front airbag inflator. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Issue: On certain vehicles, there could be a problem with the driver-front airbag inflator. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, pieces could be propelled toward the occupants. This could also cause damage to the airbag assembly and prevent it from inflating properly. Note: This recall only affects certain vehicles that had a Takata airbag inflator installed during a previous airbag recall or collision repair. Safety Risk: In a crash where the airbag deploys, there could be an increased risk of injury. Corrective Action: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the driver-front airbag inflator replaced.
On certain vehicles, the passenger frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace airbag inflator. Note: Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall supersedes special service campaign 2014567. Correction: Dealers will inspect/replace the driver's frontal airbag inflator. All vehicles having received a replacement inflator as part of any previous driver's inflator campaign will have a replacement inflator installed. Note: Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844
Honda Canada is conducting a voluntary Safety Improvement Campaign concerning the driver's airbag inflator on certain vehicles equipped with Takata airbags. Honda will replace the driver's inflator on affected vehicles. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This special service campaign was replaced by recall 2015225. Please see recall 2015225 for more information: <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2015225">Click here for more information</a>
On certain vehicles, due to prolonged exposure to high heat, the power steering hose could crack and leak power steering fluid. Fluid leaking onto a hot surface could cause smoke and could potentially result in an underhood fire. Correction: Dealers will replace the power steering hose.
On certain vehicles, the secondary shaft bearing in the automatic transmission may fail. This could cause abnormal noise, the malfunction indicator lamp to turn ON, and allow contact between the transmission idle gear and an electronic sensor housing within the transmission, resulting in a short circuit that causes the engine to stall. Engine stalling would result in lost vehicle propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash. Additionally, broken pieces may become lodged in the parking pawl resulting in the vehicle rolling after the driver has placed the gear selector in the PARK position. These issues could result in property damage and/or personal injury. Correction: Dealers will update the automatic transmission control module software.
On certain vehicles, a manufacturing fault with the fuel pump relay could cause the coil wire in the relay to break. If this happens, the fuel pump will not operate and the engine may not start. If the relay fails while driving, the engine may stall without warning and a crash could occur. Correction: Dealers will inspect and, if required, replace the fuel pump relay.
The seat position sensor (SPS) detects the driver's seating position and adjusts the airbag inflation pressure accordingly in the event of a crash. This is primarily to lessen the inflation pressure for smaller statured drivers who usually sit closer to the steering wheel. In the affected vehicles, the SPS harness was incorrectly attached to the 8-way power seat frame. Over time, the sensor harness could break which would cause the airbag warning light to be illuminated, and the SPS to fail. A failure of the SPS causes the airbag deployment to default to full inflation pressure, regardless of the seat position. Full deployment of the driver's airbag could increase the risk of injury for smaller statured drivers in a frontal crash. Correction: Dealers will replace the seat position sensor wiring harness.
On certain vehicles, a tear in the fabric of the driver's front airbag occurred after apparent contact with the inside surface of the airbag cover during deployment. A torn airbag may not offer the same level of protection in the event of a crash thereby increasing the risk of injury to the driver. Correction: Dealers will install a protective fabric flap between the airbag module and the airbag cover.
Requires attention
Common questions about recalls for this vehicle
Compare recall history with competitors and alternatives to the 2005 Honda Accord.