Campaigns on record across the Dodge Omni (1978–1990), from Transport Canada and, tagged NHTSA, the United States. Pick a model year for the Canadian listing, and check your VIN with Dodge to confirm which apply.
FEDERAL MOGUL IS RECALLING 6,903 AFTERMARKET BALL JOINT ASSEMBLIES SHIPPED BETWEEN NOVEMBER 9, 2007 AND MARCH 26, 2008, WHICH MAY HAVE BEEN PACKAGED WITH INCORRECT NUTS. THE PART NUMBERS PACKAGED WITH INCORRECT NUTS ARE: K7147, K7329, K8683, AND 104353. THESE PARTS WERE MADE FOR USE ON THE VARIOUS VEHICLES LISTED ABOVE.
THE NUTS INCLUDED IN THE PACKAGING FOR THESE BALL JOINT ASSEMBLIES ARE MISSING THE INTENDED PREVAILING TORQUE (SELF-LOCKING) FEATURE. IF THE INCORRECT NUT WAS TO BECOME LOOSE, THE JOINING MEMBERS MAY LOOSEN LEADING TO A SEPARATION OF THE BALL JOINT. THIS MAY RESULT IN LOSS OF VEHICLE CONTROL, POSSIBLY RESULTING IN A VEHICLE CRASH.
FEDERAL MOGUL WILL NOTIFY OWNERS AND REPLACE THE PARTS FREE OF CHARGE. THE RECALL BEGAN ON MAY 22, 2008. OWNERS CAN CONTACT FEDERAL MOGUL AT 877-489-6659.
08E033000 · 6,903 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer · All 1990 dodge omni recalls
THE PRESSURE REGULATOR INSTALLED IN THE FUEL SUPPLY PLUMBING SYSTEM MAY BE THE SOURCE OF FUEL LEAKAGE WHICH CAN CAUSE AN ENGINE COMPARTMENT FIRE. CORRECTION: FUEL SUPPLY SYSTEM PRESSURE REGULATOR AND ASSOCIATED PLUMBING WILL BE REPLACED WITH COMPONENTS OF ANOTHER CONFIGURATION.
1991114 · 11,872 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer · All 1987 dodge omni recalls
PRESSURE REGULATOR INSTALLED IN THE FUEL SUPPLY PLUMBING SYSTEM LEAKS FUEL INTO THE ENGINE COMPARTMENT.
FUEL LEAKS CAN RESULT IN A FIRE WHEN NEAR A SOURCE OFIGNITION.
THE FUEL SUPPLY PRESSURE REGULATOR ASSEMBLY WILL BE REPLACED WITH A NEW ASSEMBLY TO ENSURE INTEGRITY OF THE FUEL SUPPLY SYSTEM.
91V132000 · 95,000 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer · All 1987 dodge omni recalls
REAR SUSPENSION TRAILING ARM-TO-HANGER BRACKET PIVOT BOLTS MAY FAIL FROM STRESS CORROSION CRACKING POSSIBLY CAUSED BY PROCESSING DEVIATIONS IN THE CONSTRUCTION OF THE PIVOT BOLT.
FAILURE OF BOLTS MAY RESULT IN PARTIAL SEPARATION OF THEREAR SUSPENSION FROM THE VEHICLE, RESULTING IN LOSS OF VEHICLE CONTROL WITHOUTWARNING AND A VEHICLE CRASH.
REPLACE THE REAR SUSPENSION TRAILING ARM-TO-HANGER BRACKET PIVOT BOLT WITH A PROPERLY PROCESSED BOLT.
91V056000 · 55,000 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer · All 1986 dodge omni recalls
THESE VEHICLES MAY EXPERIENCE A REAR SUSPENSION TRAILING ARM TO HANGAR BRACKET PIVOT BOLT FAILURE, WHICH COULD RESULT IN PARTIAL SEPARATION OF THE REAR SUSPENSION FROM THE VEHICLE. THIS COULD RESULT IN LOSS OF VEHICLE CONTROL AND A VEHICLE CRASH WITHOUT PRIOR WARNING. CORRECTION: INVOLVED VEHICLES WILL HAVE BOTH TRAILING ARM PIVOT BOLTS REPLACED WITH PROPERLY PROCESSED BOLTS.
1991060 · 5,486 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer · All 1986 dodge omni recalls
THE ENGINE VALVE COVER GASKET MAY DISLOCATE AND ALLOW AN ENGINE OIL LEAK AT THE GASKET.
THE LEAKAGE OF OIL IN THE ENGINE COMPARTMENT COULD CAUSEA FIRE.
REPLACE GASKET COVER WITH REVISED COVER, AND RTV SEALANT WILL BE APPLIED IN PLACE OF A GASKET.
89V237000 · 634,000 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer · All 1990 dodge omni recalls
ON VEHICLES WITH 2.2 LITRE OR 2.5 LITRE EFI(NON-TURBO) ENGINE, THE VALVE COVER GASKET MAY LEAK OIL CREATING THE POTENTIAL FOR AN ENGINE COMPARTMENT FIRE. CORRECTION: VALVE COVER GASKET WILL BE REPLACED WITH A REVISED COVER AND RTV SEALANT APPLIED IN PLACE OF THE GASKET.
1989178 · 87,817 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer · All 1990 dodge omni recalls
STEERING WHEEL HORN PADS DO NOT CONTAIN THE HORN SYMBOL DISPLAY AS REQUIRED BY FMVSS 101.
VEHICLES DO NOT COMPLY WITH FMVSS 101, CONTROLS ANDDISPLAYS.
SEND NOTIFICATION POSTCARD TO OWNERS TO ASSIST ANY FUTURE OWNERS WHO MIGHT BE UNSURE OF HORN LOCATION.
89V091000 · 120,000 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer · All 1988 dodge omni recalls
On certain vehicles with 2.2 Litre turbo-charged multi-port fuel injection engines, there is a possibility that fuel leakage may occur during low ambient temperature operation at the fuel hose used to interconnect the fuel pressure regulator and the injector rail. Fuel leakage would create the potential for an engine compartment fire. Correction: the pressure regulator will be relocated and the fuel supply hose will replaced with a formed hose having a revised routing configuration.
1988091 · 44,731 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer · All 1987 dodge omni recalls
FUEL LEAKAGE MAY OCCUR IN LOW AMBIENT TEMPERATURE OPERATION AT CONNECTIONS OF AN ENGINE COMPARTMENT FUEL SUPPLY HOSE TO THE PRESSURE REGULATOR AND TO THE FUEL RAIL.
IN THE PRESENCE OF AN IGNITION SOURCE, FUEL LEAKAGE COULDRESULT IN A FIRE.
RELOCATE PRESSURE REGULATOR; REPLACE FUEL SUPPLY WITH FORMED HOSE WITH REVISED ROUTING CONFIGURATION TO ENSURE SEALING INTEGRITY.
88V105000 · 580,000 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer · All 1987 dodge omni recalls
1–10 of 45