On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the driver frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the driver frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Additional Note: This campaign affects 2007-2012 Versa hatchback models and 2007-2011 Versa sedan models. The 2012 model year Nissan Versa sedan is not involved.

2017356 · 111,411 units in campaign · Transport Canada

Applies only if the manufacturer confirms your VIN · repair by an authorized dealer

On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.

2017023 · 51,545 units in campaign · Transport Canada

Applies only if the manufacturer confirms your VIN · repair by an authorized dealer

On certain vehicles, the front suspension coil springs may have been manufactured with an inadequate phosphorous coating, and/or could have low residual stress in the springs. This inadequate coating could lead to cracking due to coil-to-coil contact when the spring is compressed, which would allow the spring to be more susceptible to corrosion. In some instances coil spring breakage could occur. If ignored, broken front coil spring could damage the front tires and cause rapid air loss and/or tire failure, which could affect the driver's ability to bring the vehicle to a controlled stop, increasing the risk of a crash causing injury and/or property damage. Correction: Dealers will replace both front coil springs.

2015402 · 110,604 units in campaign · Transport Canada

Applies only if the manufacturer confirms your VIN · repair by an authorized dealer

On certain vehicles, the relays in the daytime running light (DRL) circuit could have become contaminated with silicon during the assembly process. This could, in some circumstances, cause one or both of the relays to stop functioning, which would cause one or both of the daytime running lights not to illuminate automatically when the vehicle is driven. Should this condition occur, the lack of DRL function may render the vehicle less visible to other motorists and pedestrians, possibly resulting in a vehicle crash. Correction: Dealers will replace the relays for the daytime running lights circuit.

2010434 · 73,697 units in campaign · Transport Canada

Applies only if the manufacturer confirms your VIN · repair by an authorized dealer

On certain vehicles, the terminals for the passenger side seatbelt tension sensor harness connector may have been damaged during manufacturing process. This could result in a loss of electrical continuity causing the Occupant Detection System to become inoperative. If this occurs, the airbag warning light will come on and the passenger side frontal airbag will not deploy in a crash. Correction: Dealers will replace the connector for the seatbelt tension sensor harness.

2007069 · 6,124 units in campaign · Transport Canada

Applies only if the manufacturer confirms your VIN · repair by an authorized dealer

Certain vehicles fail to comply with the requirements of CMVSS 135. Specifically, the "WARNING: Clean filler cap before removing" portion of the required statement on the brake fluid reservoir cap was omitted. Correction: Updated brake fluid reservoir caps will be mailed to vehicle owners along with installation instructions.

2006213 · 4,782 units in campaign · Transport Canada

Applies only if the manufacturer confirms your VIN · repair by an authorized dealer