2020 Peterbilt 520
NHTSA lists 12 recalls for the 2020 Peterbilt 520.
Confirm with NHTSA · Only the manufacturer confirms which recalls apply to one VIN.
12 recalls
- The suspension tracking rod brackets may fail and detach from the forward drive axle, causing the axle to become unstableNHTSASuspension › Multiple axleDec 16, 202215,658 vehicles
- The Dana D-Series axle steer arm fasteners that attach the steering arm to the steering knuckle may failNHTSASteering › FastenersApr 25, 202217,641 vehicles
- The quick release valve on the rear brake signal hose may be missingNHTSABrakes › Air service brakesSep 16, 202115 vehicles
- The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leakNHTSAFuel system › Fuel injectionMay 26, 2021612 vehicles
- The steering column support structure may crack or break in certain right-hand, stand-up drive modelsNHTSASteering › ColumnJan 11, 20211,021 vehicles
- The stability control brake relay may have the Spring Brake Modulating (SBM) Valve or the lift axle hose incorrectly connectedNHTSADriver assistance › Electronic stability controlNov 25, 202011 vehicles
- The axles may have lower rear pivot bolts that are not long enough to sufficiently engage the locking feature of the corresponding nutsNHTSAPowertrain › AxleAug 26, 20201,097 vehicles
- Incorrect bolts may have been used to secure the steering assist cylinder bracket, possibly allowing the bolts to loosenNHTSASteering › Electric power assistJul 24, 2020239 vehicles
- The rear brake signal hose may be missing a quick release valve, possibly causing a delay in their brake release timingNHTSABrakes › Air service brakesMar 4, 2020233 vehicles
- The forward rear axle output shafts may have been improperly heat treated during manufacturing, possibly resulting in the shafts fracturingNHTSAPowertrain › Axle shaftDec 19, 2019148 vehicles
- The turn signals may also light up with the stop/tail lights when the brakes are appliedNHTSALighting › Tail lightsJun 14, 2019343 vehicles
- The connector between the cab power harness and the power distribution center (PDC) harness may overheat and melt, possibly resulting in an engine shutdownNHTSAEngineApr 9, 20195,051 vehicles