Newest first. Many cover only part of a model year, so check your VIN with NHTSA or Mercedes-Benz before booking a repair.
NHTSA · listed for this model year
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2013-2017 vehicles due to a software fault that may cause the date and time for the emergency call system (eCall) to differ from the actual date and time, potentially relaying an inaccurate vehicle location. For a full list of the affected models visit: https://static.nhtsa.gov/odi/rcl/2019/RMISC-19V787-4620.pdf
An inaccurate vehicle location may delay emergency responders, increasing the risk of injury.
MBUSA has initiated an Over the Air (OTA) remote update. MBUSA will also notify owners, and dealers will check software for a successful OTA or update the communication module software as needed, free of charge. The recall began December 23, 2019. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2019120008.
19V787000 · 24,226 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2012-2014 ML350 Bluetec 4Matic and ML550 4Matic, 2012-2015 ML63 AMG 4Matic and ML350 4Matic, 2013-2016 GL350 Bluetec 4Matic, GL550 4Matic and GL63 AMG 4Matic, 2017 GLS350d 4Matic, GLS450 4Matic, GLS550 4Matic and GLS63 AMG 4Matic, 2015 ML400 4Matic, 2016 GLE400 4Matic, GLE350 4Matic, GLE63 AMG 4Matic, GLE63S AMG 4Matic, GLE450 4Matic Coupe and GLE63S AMG 4Matic Coupe, 2015-2016 GL450 4Matic and 2013-2014 GL450 4Matic vehicles equipped with the Active Curve System (ACS). In certain driving conditions, if the oil level in the ACS reservoir is below the minimum level, the oil may foam and leak out of the vent holes in the reservoir cap.
The leaking oil in the presence of an ignition source can increase the risk of a fire.
MBUSA will notify owners, and dealers will correct the oil level as necessary and replace the reservoir sealing cap to prevent oil foam from leaking out, free of charge. The recall began August 30, 2018. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2018070015.
18V272000 · 9,725 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Mercedes-Benz USA, LLC (Mercedes) is recalling certain model year 2013 GL350 BlueTEC, GL450 4MATIC, GL550 4MATIC, and GL63 AMG vehicles manufactured May 15, 2012 through October 4, 2012. The second row seat belt anchor fitting bolts may not be properly torqued.
If the bolts are not properly torqued, the seat belt anchor bolts may continue to loosen and in the the event of a crash, the belted occupant may not be properly restrained, increasing the risk of injury.
Mercedes-Benz will notify owners and dealers will check, and tighten the bolts of the seat belt anchor fittings, as necessary, free of charge. The recall campaign began on May 24, 2013. Owners may contact Mercedes-Benz at 1-800-367-6372.
13V166000 · 256 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Canadian records (Transport Canada) · 4
These are Transport Canada campaigns for 2013 Mercedes-Benz GL-Class vehicles sold in Canada. A Canadian campaign may have no US counterpart, or one under a different number covering different vehicles. For a vehicle sold in the United States, go by the NHTSA listing above and NHTSA's VIN lookup.
Issue: On certain vehicles, corrosion could cause the brake booster to fail. If this happens, there may be an increase in brake pedal effort and increase the distance needed to stop the vehicle. In rare cases of severe corrosion, the brake booster could separate completely and cause a loss of brakes. Safety Risk: A loss of brakes can increase the risk of a crash. Corrective Actions: Mercedes-Benz advises you to stop driving your vehicle immediately. The company will notify owners by mail and instruct you to contact a local Mercedes-Benz dealership to arrange for towing and an inspection. The dealer will remove the rubber brake booster sleeve and determine whether the vehicle is safe to drive or if it can't be driven and a parts replacement is necessary. Also, depending on the results of the inspection, you may need to return within two years for a re-inspection.
2022237 · 31,577 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain vehicles equipped with the Active Curve System (ACS), the oil in the ACS’s reservoir could start foaming under certain dynamic driving situations in combination with an oil level below minimum. The oil foam could leak out of the oil reservoir through the vent holes in the sealing cap and spray onto hot surface components of the exhaust system. This could increase the risk of fire causing injury and/or damage to property. Correction: Dealers will inspect the ACS reservoir for proper oil level and replace the sealing cap with an updated part.
2018217 · 1,627 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain vehicles, an update provided between de 3rd and 5th of December 2016 to the vehicle control unit may have been incorrectly applied. This could affect the proper function of various safety systems such as airbag deployment sequence, seatbelts recognition status, speed limiter setting and others. These conditions could increase the risk of injury to the occupants in the event of a crash. Correction: Dealers will update the affected control units.
2017145 · 4 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain vehicles, seatbelt anchors for the second row seats may not have been sufficiently tightened during vehicle assembly. Failure of the seatbelt anchor to restrain the seat occupant during a crash could increase the risk of personal injury. Correction: Dealers will inspect and, if necessary, tighten the second row seatbelt anchor bolts.
2013138 · 30 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
2013 Mercedes-Benz GL-Class recall questions
NHTSA lists 3 recalls for the 2013 Mercedes-Benz GL-Class model year. That counts campaigns naming this model year, not recalls on your vehicle: many cover only a VIN range or production window. Transport Canada lists 4 Canadian campaigns for the Canadian-market model, shown separately.
Enter your VIN in NHTSA's recall lookup or Mercedes-Benz's own, or call a Mercedes-Benz dealer with your VIN. Cardog uses your VIN only to find the model year; the recalls shown here are listed for that model year and are not matched to your VIN.
Not necessarily. Transport Canada campaigns cover vehicles sold in Canada. For a vehicle sold in the United States, go by the NHTSA listing and NHTSA's VIN lookup.
Safety recall repairs are normally done at no charge by an authorized Mercedes-Benz dealer. The manufacturer's notice for each campaign sets out the remedy and any conditions, so confirm with the dealer when you book.
Once Mercedes-Benz's lookup or a dealer confirms a recall applies, book the repair with an authorized Mercedes-Benz dealer and bring your VIN. If the manufacturer's notice says not to drive the vehicle or to park it outside, follow that instruction. Parts can take time, so book early.
Follow the manufacturer's notice for that recall. Most allow normal driving until the repair; some tell owners to stop driving or to park outside until it is fixed. Cardog does not grade recalls by severity: the manufacturer's notice and your dealer are the source.
Manufacturers must notify owners they have on record. If you bought the vehicle used or have moved, update your details with Mercedes-Benz so notices reach you, and check NHTSA's lookup from time to time.
Related recall checks
Compare recall listings with alternatives to the 2013 Mercedes-Benz GL-Class.