2014 Kenworth T800
NHTSA lists 12 recalls for the 2014 Kenworth T800.
Confirm with NHTSA · Only the manufacturer confirms which recalls apply to one VIN.
12 recalls
- The air tanks have an insufficient volume of air for the brake systemNHTSABrakes › SupplyFeb 23, 2024936 vehicles
- In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABSNHTSADriver assistance › Electronic stability controlApr 6, 2020460,515 vehicles
- The brake control airline may be the incorrect size, resulting in an imbalance in the service brake application timingNHTSABrakes › Air service brakesMay 16, 201723 vehicles
- Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfacesNHTSAEngineMay 26, 20154,823 vehicles
- The affected trucks are built with a driveshaft that may not transmit power to the wheels due to weld failure from corrosionNHTSAPowertrain › DriveshaftMay 26, 201530 vehicles
- In the affected trucks, water may leak into the wiper motorNHTSAVisibility › MotorMay 8, 2015104,807 vehicles
- Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensorNHTSAEngineFeb 18, 20142,019 vehicles
- When the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, making the seat belt difficult to unlatchNHTSAOccupant protection › Seat beltsJan 24, 201410,414 vehicles
- In the affected vehicles, the plastic housing of the Stop/Tail/Turn (STT) lamp can shrink and allow the light bulb to fall out of the mounted retention ringNHTSALighting › Tail lightsDec 5, 20135,087 vehicles
- The affected trucks have brake chambers that take longer to apply or release the brakes than the required time limitNHTSABrakesNov 18, 201318 vehicles
- A parameter in the Electronic Service Analysis (ESA) tool was mistakenly switched to disable the start-in-gear protection featureNHTSAElectrical › SoftwareJun 11, 20134 vehicles
- An internal defect in the ignition switch causes the starter to engage when a key is partially inserted, before the key is turnedNHTSAElectrical › SwitchMay 28, 20131,773 vehicles