2015 E One Typhoon
NHTSA lists 12 recalls for the 2015 E One Typhoon.
Confirm with NHTSA · Only the manufacturer confirms which recalls apply to one VIN.
12 recalls
- The engines do not have a diode in the starter solenoid circuit to improve the longevity of the lock-out relay, resulting in accumulated damage over timeNHTSAElectrical › StarterOct 14, 20191,603 vehicles
- High current load in the HVAC system can cause one of the relays to meltNHTSAElectricalOct 22, 201886 vehicles
- Inconsistent machining may result in fatigue cracks developing over time in the front axle spindles, causing failure of the spindle and the possible separation of a front wheel from the vehicleNHTSASuspension › FrontMar 15, 201836 vehicles
- The affected engines do not have a diode in the starter solenoid circuit to improve the longevity of the lock-out relay, resulting in accumulated damage over timeNHTSAElectrical › StarterJan 9, 20181,147 vehicles
- Rings securing the valves may corrode over time after exposure to water, causing the ring to fail and the pressure relief valve to open, reducing the water pressure available for fire fightingNHTSAEquipmentNov 20, 2017298 vehicles
- The ball joints on the independent front suspension (IFS) modules can loosen and separate, leading to a partial loss of steeringNHTSASuspension › Control armApr 5, 201729 vehicles
- The filter for the aerial ladder may leak hydraulic fluidNHTSAEquipmentNov 3, 2016196 vehicles
- The touchscreen may experience false switch activations that can happen without the operator's knowledge causing accessories to turn on or offNHTSAElectricalAug 3, 20161 vehicle
- The affected vehicles may be equipped with certain C20 and C21 split-shaft transmissions from WaterousNHTSAPowertrain › Manual transmissionAug 1, 201642 vehicles
- The affected power control modules may not provide sufficient circuit protection depending on their combination of software and installation, possibly resulting in a short circuitNHTSAElectricalJun 16, 201627 vehicles
- These pumps have 6" intake strainers that may have been improperly soldered during production and, as a result, the strainers may come apart during use, allowing parts of the strainer and debris to enter the pump, pos…NHTSAEquipmentMay 12, 2016140 vehicles
- The affected vehicles may have left the production facility with a harness for the front air bag system disconnectedNHTSAOccupant protection › AirbagsOct 13, 201518 vehicles