1993 Saab 9000
Safety Recalls & Notices
We found 10 safety recalls for the 1993 Saab 9000. Recalls are sourced from both NHTSA (US) and Transport Canada databases. Contact your authorized Saab dealer to schedule free repairs.
Summary
On certain vehicles, moisture could enter the air bag electronic control module and cause corrosion on portions of the ECM printer circuit boards. This condition can, in extreme cases, create open connections in circuits controlling air bag deployment with the possibility of inadvertent air bag and/or pretensioner deployment. Correction: Dealers will inspect the electronic control module and install a protective cover over the module to prevent moisture from entering.
Summary
ON VEHICLES EQUIPPED WITH "MkII" ABS BRAKING SYSTEM, MOISTURE MAY FOLLOW THE WIRING TO THE PRESSURE WARNING SWITCH ON THE ABS UNIT WHICH CAN CAUSE CORROSION TO BUILD UP ON THE CONNECTION TERMINAL. A MALFUNCTION COULD CAUSE A LOSS OF POWER ASSISTANCE. CORRECTION: IF THE SWITCH CONNECTION PINS ARE CORRODED, THE SWITCH WILL BE REPLACED. ON ALL AFFECTED VEHICLES, THE SWITCH CONNECTION WILL BE SPRAYED WITH A COATING AND SHRINK SLEEVE WILL BE APPLIED TO SEAL THE CONNECTION FROM WATER.
Summary
A SLIGHTLY DOWNWARD LOW ENERGY IMPACT COULD RESULT IN BREAKAGE OF THE ENGINE OIL COOLER HOSE AND/OR HOUSING. LEAKING OIL FROM THE OIL COOLER CAN BE IGNITED BY A HOT EXHAUST MANIFOLD OR TURBOCHARGER RESULTING IN AN ENGINE COMPARTMENT FIRE. CORRECTION: A PROTECTIVE COVER WILL BE INSTALLED OVER THE OIL COOLER.
Summary
THERE IS A RISK THAT THE BRAKE LIGHT SWITCH CAN STICK IN THE "ON" OR "OFF" POSITION. THIS CAN RESULT IN THE BRAKE LIGHTS REMAINING ON CONSTANTLY OR IN THE BRAKE LIGHTS NOT ILLUMINATING WHEN THE BRAKES ARE APPLIED. CORRECTION: DEALERS WILL INSPECT, AND, IF NECESSARY, REPLACE THE BRAKE LIGHT SWITCH.
Summary
CRACKS CAN DEVELOP IN THE TWO (2) RUBBER HOSES THAT CONNECT THE FUEL TANK WITH THE PLASTIC PIPES WHICH GO TO THE FUEL FILLER HOUSING. THIS COULD RESULT IN FUEL LEAKAGE AND, IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR. CORRECTION: DEALERS WILL REPLACE THE HOSES AND REPLACE THE CLAMPS WITH NEW STYLE CLAMPS THAT HAVE A PROTECTIVE INNER LAYER.
Summary
VEHICLE DESCRIPTION: PASSENGER VEHICLES. MOISTURE CAN ENTER THE AIR BAG INFLATABLE RESTRAINT ELECTRONIC CONTROL MODULE (ECM) AND CAUSE CORROSION ON PORTIONS OF THE ECM PRINTER CIRCUIT BOARDS.
Potential Consequence
THIS CORROSION CAN POSSIBLY CREATE OPEN CONNECTIONS IN CIRCUITS WHICH CONTROL THE RESTRAINT DEPLOYMENT, POSSIBLY CAUSING INADVERTENT AIR BAG DEPLOYMENT.
Remedy
DEALERS WILL INSPECT THE EXTERIOR OF THE ECM. IF THERE IS NO INDICATION OF MOISTURE, A COVER WILL BE INSTALLED OVER THE ECM. IF THERE IS INDICATION OF MOISTURE, THE DEALER WILL REPLACE THE ECM AND INSTALL A COVER OVER THE NEW ECM.
Summary
MOISTURE CAN FOLLOW THE ELECTRICAL HARNESS AND ENTER THE PRESSURE SWITCH CONNECTOR CAUSING CORROSION AND MALFUNCTION OF THE SWITCH.
Potential Consequence
THE CORROSION CAUSES A DETERIORATION OF THE ELECTRICALSWITCH CONNECTION AND CAN RESULT IN FALSE ILLUMINATION OF ABS AND/OR THE BRAKE WARNING LIGHTS AND/OR THE LOSS OF POWER ASSISTANCE BECAUSE OF NO HYDRAULIC PUMPOPERATION. LOSS OF POWER ASSIST INCREASES THE DRIVER'S BRAKE PEDAL EFFORT REQUIRED FOR STOPPING WHICH CAN RESULT IN EXTENDED BRAKING DISTANCES.
Remedy
DEALERS WILL INSPECT THE ELECTRICAL CONNECTIONS TO THE ABS PRESSURE SWITCH TERMINALS FOR CORROSION AND INSTALL A SHRINK HOSE TO THE WIRING HARNESS TO AVOID MOISTURE ENTERING THE CONNECTION. PRESSURE SWITCHES WITH CORRODED CONNECTORS WILL BE REPLACED.
Summary
DURING LOW ENERGY FRONTAL IMPACT COLLISIONS, THE FRONT CROSSMEMBER CAN CONTACT THE METAL TUBING PORTION OF THE COOLER HOSE ASSEMBLY; AND/OR THE HOSE ASSEMBLY CAN BREAK AND LEAK OIL ONTO THE HOT EXHAUST MANIFOLD OR THE TURBOCHARGER.
Potential Consequence
OIL LEAKING ON THESE HOT ENGINE SURFACES CAN IGNITE AND CAUSE A VEHICULAR FIRE.
Remedy
DEALERS WILL INSTALL A PROTECTIVE COVER WHICH WILL PROTECT THE COOLER AND HOSES FROM OTHER STRUCTURAL COMPONENTS IN LOW ENERGY FRONT IMPACTS.
Summary
A NUMBER OF BRAKE LIGHT SWITCHES HAVE AN OVAL-SHAPED PISTON WHICH CAN GET STUCK UNDER CERTAIN CONDITIONS. OTHER SWITCHES WERE MOUNTED SO THAT BOTH LOCKING TABS ARE NOT COMPLETELY ENGAGED IN THE MOUNTING BRACKET. IF ONE SIDE IS NOT ENGAGED, THE SWITCH IS MISALIGNED WITH THE PEDAL MECHANISM AND CAN BIND THE PISTON MOVEMENT, WHICH CAN CAUSE THE BRAKE LIGHT SWITCH TO STICK IN THE "OFF" OR "ON" POSITION.
Potential Consequence
THIS RESULTS IN EITHER THE BRAKE LIGHTS REMAINING ON CONSTANTLY OR THE BRAKE LIGHTS NOT ILLUMINATING WHEN THE BRAKES ARE APPLIED. THIS RESULTS IN INACCURATE SIGNALS OF BRAKE OPERATION TO OTHER VEHICLE OPERATORS, AND COULD RESULT IN AN ACCIDENT.
Remedy
DEALERS WILL INSPECT BRAKE LIGHT SWITCHES. FOR VEHICLES WITH THE OVAL-SHAPED PISTON AND FOR VEHICLES WITH MISALIGNED BRAKE LIGHT SWITCHES, THE BRAKE LIGHT SWITCH WILL BE REPLACED.
Summary
THE FUEL FILLER AND TANK VENTILATION HOSES MAY DEVELOP CRACKS UNDER THE SECURING HOSE CLAMPS, RESULTING IN FUEL LEAKAGE.
Potential Consequence
FUEL LEAKS MAY RESULT IN A FIRE IF AN IGNITION SOURCEIS PRESENT.
Remedy
THE FUEL FILLER AND FUEL VENTILATION HOSES WILL BE REPLACED WITH NEW HOSES. THE FIVE SECURING HOSE CLAMPS WILL BE REPLACED BY A NEW TYPE WITH A SHIELD THAT PREVENTS DAMAGE TO THE HOSE WHEN TIGHTENED.
10 Active Recalls
Requires attention
1993 Saab 9000 Recall FAQs
Common questions about recalls for this vehicle
Related Recall Checks
Compare recall history with competitors and alternatives to the 1993 Saab 9000.