1995 Mercury Villager
Safety Recalls & Notices
We found 6 safety recalls for the 1995 Mercury Villager. Recalls are sourced from both NHTSA (US) and Transport Canada databases. Contact your authorized Mercury dealer to schedule free repairs.
Summary
On certain vehicles, cracks could develop in the fuel vent hose. If (1) the fuel tank is overfilled, not allowing excess fuel in the vent hose to flow back into the tank, (2) the vehicle is driven only a short distance after refueling and, (3) there is subsequently significant heating of the fuel tank, the fuel in the tank can expand into the vent hose and leak fuel. Fuel leakage in the presence of an ignition source can result in a fire. Correction: Fuel tank vent hose will be replaced.
Summary
A REAR LAMP ON THESE VEHICLES MAY NOT ILLUMINATE BECAUSE THE METAL CAN IN THE LAMP SOCKET MOVES OR SEPARATES FROM THE PLASTIC SOCKET HOUSING. THIS CAN RESULT IN THE STOP/TAIL COMBINATION LAMP OR THE TURN SIGNAL LAMP NOT FUNCTIONING. THE CENTER HIGH MOUNTED STOP LAMP OPERATION IS NOT AFFECTED. CORRECTION: BOTH REAR LAMP SOCKET ASSEMBLIES WILL BE REPLACED WITH AN IMPROVED ASSEMBLY.
Summary
THESE VEHICLES MAY NOT COMPLY WITH C.M.V.S.S. 207 - ANCHORAGE OF SEATS AND 210 - SEAT BELT ASSEMBLY ANCHORAGES. CERTAIN SEAT ANCHORAGES ARE ATTACHED TO THE THIRD SEAT. THE SLIDING SEAT LATCH ON THIS SEAT MAY NOT FULLY ENGAGE AND THEREFORE THE SEAT MAY NOT SUSTAIN THE LOADS SPECIFIED IN THE STANDARDS. CORRECTION: THE ROLLER ASSEMBLY IN THE THIRD ROW SEAT ACTUATOR ASSEMBLY WILL BE REPLACED.
Summary
VEHICLE DESCRIPTION: MINIVANS. THE FUEL TANK VENT HOSE ALLOWS AIR TO VENT FROM THE FUEL TANK DURING REFUELING. CRACKS HAVE DEVELOPED IN THE VENT HOSE. IF (1) THE FUEL TANK IS OVERFILLED, NOT ALLOWING EXCESS FUEL IN THE VENT HOSE TO FLOW BACK INTO THE TANK, (2) THE VEHICLE IS DRIVEN ONLY A SHORT DISTANCE AFTER REFUELING AND, (3) THERE IS SUBSEQUENTLY SIGNIFICANT HEATING OF THE FUEL TANK, THE FUEL IN THE TANK CAN EXPAND INTO THE VENT HOSE AND LEAK FUEL.
Potential Consequence
FUEL LEAKAGE IN THE PRESENCE OF AN IGNITION SOURCE CAN RESULT IN A FIRE.
Remedy
DEALERS WILL REPLACE THE VENT HOSE.
Summary
THE REAR LAMP SOCKET MAY NOT ILLUMINATE BECAUSE THE METAL CAN IN THE LAMP SOCKET MOVES OR SEPARATES FROM THE PLASTIC SOCKET HOUSING.
Potential Consequence
THIS CAN RESULT IN MALFUNCTION OF THE STOP OR REAR RUNNING LAMPS. CENTER HIGH MOUNT STOP LAMP FUNCTION IS UNAFFECTED. REAR LAMP MALFUNCTION CAN RESULT IN FOLLOWING DRIVERS NOT BEING ALERTED TO THE SUBJECT VEHICLE'S PRESENCE OR INTENDED ACTIONS, PARTICULARLY IN THE CASE IN WHICH BOTH LAMPS HAVE MALFUNCTIONED.
Remedy
DEALERS WILL INSTALL A REVISED REAR LAMP SOCKET AND WIRING ASSEMBLIES.
Summary
AN OUT-OF-SPECIFICATION CONDITION IN THE SEAT CABLE ROLLER PULLEY ASSEMBLY CAN ALLOW THE CABLE THAT CONNECTS THE SEAT ADJUST LEVER TO THE LATCH TO BE PINCHED IN THE ROLLER ASSEMBLY.
Potential Consequence
CONSEQUENCE OF NON-COMPLIANCE: THIS CONDITION CAN PREVENT THE LATCH ON THE LEFT SIDE FROM FULLY ENGAGING THE SEAT RAIL. THIS DOES NOT COMPLY WITH THE REQUIREMENT OF FMVSS NO. 207, "SEATING SYSTEMS."
Remedy
DEALERS WILL REPLACE A COMPONENT IN THE THIRD ROW SLIDING BENCH SEAT LATCH ASSEMBLY.
6 Active Recalls
Requires attention
1995 Mercury Villager Recall FAQs
Common questions about recalls for this vehicle
Related Recall Checks
Browse recall information for the latest model year vehicles.