Newest first. Many cover only part of a model year, so check your VIN with Mazda before booking a repair.
Transport Canada · listed for this model year
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Mazda will notify owners by mail and instruct you to take your vehicle to a dealer to replace the driver-front airbag inflator. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
2021145 · 13,719 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Note: This recall supersedes recall 2017-013 (Mazda Recall 0817A). Vehicles repaired under the previous recall require a final repair under this recall, as the previous recall remedy was an interim repair. Interim repair parts must be replaced with final repair parts.
2018039 · 10,389 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain vehicles, the front spindles may not have received adequate heat treatment during the manufacturing process. As a result, the spindle may fracture, allowing the spindle and wheel assembly to separate from the vehicle while underway. This could cause a loss of vehicle control and a crash. In addition, the errant wheel assembly could strike a vehicle, property, or a bystander, which could result in personal injury or death. Correction: Dealers will inspect and, if necessary, replace the front spindles.
2009030 · 207 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
United States records (NHTSA) · 5
These are NHTSA campaigns for 2009 Mazda B-Series vehicles sold in the United States. They are not Canadian recalls: NHTSA's VIN lookup has no Canadian data, and a US campaign may have no Canadian counterpart, or one under a different number covering different vehicles. For a vehicle sold in Canada, go by the Transport Canada listing above and Mazda's Canadian VIN lookup.
Mazda North American Operations (Mazda) is recalling certain 2007-2009 B-Series pickup trucks. The driver's side air bag inflator may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Mazda will notify owners, and dealers will replace the driver-side air bag inflator with an alternate one, free of charge. Owners were notified of the safety risk with an interim letter mailed April 26, 2021. A second letter was sent December 2021. Owners may contact Mazda customer service at 1-800-222-5500 option 4. Mazda's number for this recall is 4821C.
21V162000 · 5,847 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Mazda North American Operations (Mazda) is recalling certain 2009 B-Series trucks ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began June 15, 2018. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 2118A.
18V016000 · 84 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Mazda North America Operations (Mazda) is recalling certain 2007-2009 B-Series trucks sold, or ever registered, in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Additionally, unless included in "Zone B" above, Mazda is recalling certain 2007-2008 B-Series trucks sold, or ever registered, in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Owners are advised not to drive their vehicles until the remedy is performed. Mazda will notify owners, and dealers will replace the front passenger air bag inflator, free of charge. The recall began June 15, 2018. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0817A.
17V013000 · 725 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Mazda North American Operations (Mazda) is recalling certain model year 2007-2009 B-Series trucks manufactured June 6, 2006, to January 22, 2009, originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Mazda is recalling certain model year 2007-2008 B-Series trucks manufactured February 21, 2006, to April 28, 2008, originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Any vehicle not included in "Zone A", or "Zone B" is not included in this safety recall. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Owners are advised not to drive their vehicles until the remedy is performed. Mazda notified owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began June 15, 2018. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9616F.
16V499000 · 5,038 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
MAZDA IS RECALLING 220 MY 2009 B-SERIES TRUCKS EQUIPPED WITH 2-WHEEL DRIVE. THE FRONT SPINDLE STEM MAY CRACK DUE TO AN IMPROPER MANUFACTURING PROCESS OF THE SPINDLE.
IF A FRACTURE OF THE SPINDLE STEM OCCURS, THE WHEEL MAY SEPARATE FROM THE AXLE, WHICH MAY RESULT IN A LOSS OF STEERING, INCREASING THE RISK OF A CRASH WITHOUT WARNING.
DEALERS WILL INSPECT THE FRONT SPINDLE AND REPLACE IT IF NECESSARY FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN ON OR BEFORE FEBRUARY 9, 2009. OWNERS MAY CONTACT MAZDA AT 800-222-5500.
09V032000 · 220 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
2009 Mazda B-Series recall questions
Transport Canada lists 3 recalls for the 2009 Mazda B-Series model year. That counts campaigns naming this model year, not recalls on your vehicle: many cover only a VIN range or production window, and some only vehicles found on inspection. NHTSA lists 5 United States campaigns for the US-market model, shown separately; a US campaign may have no Canadian equivalent.
Enter your VIN in Mazda's Canadian recall lookup, or call a Mazda dealer with your VIN. In Canada the manufacturer is responsible for showing recall and repair status for each VIN, so its lookup is the authoritative answer. Cardog uses your VIN only to find the model year; the recalls shown here are listed for that model year and are not matched to your VIN.
Not necessarily. NHTSA campaigns cover vehicles sold in the United States, and NHTSA's VIN lookup has no Canadian data. When a defect also affects Canadian vehicles, the manufacturer files a separate notice with Transport Canada, often under a different number and sometimes covering a different set of vehicles. For a Canadian vehicle, go by the Transport Canada listing and Mazda's Canadian lookup.
Safety recall repairs are normally done at no charge by an authorized Mazda dealer. The manufacturer's notice for each campaign sets out the remedy and any conditions, so confirm with the dealer when you book.
Once Mazda's lookup or a dealer confirms a recall applies, book the repair with an authorized Mazda dealer and bring your VIN. If the manufacturer's notice says not to drive the vehicle or to park it outside, follow that instruction. Parts can take time, so book early.
Follow the manufacturer's notice for that recall. Most allow normal driving until the repair; some tell owners to stop driving or to park outside until it is fixed. Cardog does not grade recalls by severity: the manufacturer's notice and your dealer are the source.
Manufacturers must notify owners they have on record. If you bought the vehicle used or have moved, update your details with Mazda Canada so notices reach you, and check the manufacturer's lookup from time to time.
Related recall checks
Compare recall listings with alternatives to the 2009 Mazda B-Series.