Safety Recalls & Notices
Requires attention
Issue: On certain vehicles, the compliance label may be missing information in French. The words listed on the label for "Tires", "Rims", "Front" and "Rear" appear in English only, when they should be listed as "Tires/Pneus", "Rims/Jantes", "Front/Avant" and "Rear/Arriere". Canadian regulations require this information to be listed on the label in both English and French. Safety Risk: These small errors do not affect vehicle safety. Corrective Actions: This is not a recall. The company has corrected the compliance label for all new vehicles.
Hyundai Motor America (Hyundai) is recalling certain 2018 Santa Fe Sport vehicles. The Anti-Lock Brake System (ABS) module could malfunction and cause an electrical short, which could result in an engine compartment fire while parked or driving.
An engine compartment fire while parked or driving can increase the risk of injury.
Owners are advised to park outside and away from structures until the recall repair is complete. Dealers will replace the ABS multi-fuse, free of charge. Owner notification letters were mailed November 16, 2022. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 237. This recall is an expansion of recall 22V-056.
Issue: On certain vehicles, the control module for the antilock brake system (ABS) could short circuit. Note: This recall doesn't affect vehicles equipped with smart cruise control (SCC). This recall replaces Transport Canada recall 2022-046. Vehicles that were already repaired under Hyundai recall R0208 don't require this repair. Safety Risk: A short circuit could create a fire risk, even while the vehicle is parked and turned off. Corrective Actions: Hyundai will notify owners by mail and instruct you to take your vehicle to a dealer to replace the ABS multi-fuse. Hyundai advises that you may continue to drive your vehicle, however recommends that you should park it outdoors and away from other vehicles or structures until the recall repairs have been completed.
This recall was replaced by Transport Canada Recall No. 2022-616 due to increase in the number of recalled vehicles. Issue: On certain vehicles, the control module for the antilock brake system (ABS) could short circuit. Note: This recall does not affect vehicles equipped with smart cruise control (SCC). Safety Risk: A short circuit could create a fire risk. Corrective Actions: Hyundai will notify owners by mail and instruct you to take your vehicle to a dealer to replace the ABS multi-fuse. Hyundai advises that you may continue to drive your vehicle, however recommends that you should park it outdoors and away from other vehicles or structures until the recall repairs have been completed.
Hyundai Motor America (Hyundai) is recalling certain 2016-2018 Santa Fe, 2017-2018 Santa Fe Sport, 2019 Santa Fe XL, and 2014-2015 Tucson vehicles. The Anti-Lock Brake System (ABS) module could malfunction and cause an electrical short, which could result in an engine compartment fire.
An engine compartment fire while parked or driving can increase the risk of injury.
Owners are advised to park outside and away from structures until the recall repair is complete. Dealers will replace the ABS multi-fuse, as necessary, free of charge. Owner notification letters were mailed May 31, 2022. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 218.
Issue: Certain vehicles may be equipped with an accessory trailer wiring harness kit that could fail. Over time, moisture could enter the control module and cause a short circuit. Note: This recall only affects Hyundai Genuine Accessory trailer wiring harness kits that were manufactured by third parties and sold in Canada. These kits may have been ordered at the time of a vehicle purchase, or purchased separately from a dealer as an aftermarket accessory. Safety Risk: A short circuit could create a fire risk. This risk remains even when the vehicle is parked. Corrective Actions: Hyundai will notify owners by mail and instruct you to inspect your vehicle to see if it has an affected trailer wiring harness installed. If it does, Hyundai will advise you to take your vehicle to a dealer to install a redesigned trailer wiring harness. Hyundai recommends that you should park your vehicle outdoors, and away from other vehicles or structures until the recall repairs have been completed.
Issue: Hyundai Auto Canada is conducting a Product Improvement Campaign that provides an update to the engine control module to detect potential problems before an engine fails. An engine failure would cause a sudden loss of power with an inability to restart. Note: This affects Sonata and Santa Fe Sport equipped with a 2.4 L GDI or 2.0 L Turbo GDI engine, as well as Tucson equipped with a 2.4 L GDI engine. Safety Risk: A sudden loss of engine power could increase the risk of an accident. Corrective Actions: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to update the software for the engine control module. Note: Vehicles previously repaired under Product Improvement Campaign R0153 (TC # 2019-130) do not require this software update. Owners can find additional information at <a href="http://www.hyundaiengineinfo.ca">www.hyundaiengineinfo.ca</a>.
Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
Issue: Hyundai Auto Canada is conducting a Product Improvement Campaign that provides an update to the engine control module to detect potential problems before an engine fails. An engine failure would cause a sudden loss of power with an inability to restart. Note: This affects Sonata and Santa Fe Sport equipped with a 2.4 L GDI or 2.0 L Turbo GDI engine, as well as Tucson equipped with a 2.4 L GDI engine. Safety Risk: A sudden loss of engine power could increase the risk of an accident. Corrective Actions: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to update the software for the engine control module. Note: Vehicles repaired under Service Campaigns, C0336, C0344, or C0347, already have this software update. Owners can find additional information at <a href="http://www.hyundaiengineinfo.ca">www.hyundaiengineinfo.ca</a>.
Issue: When repairs were completed under recall campaign 2015-428 (Hyundai #R0101) or 2017197 (Hyundai #R0130), the high pressure fuel pipe may not have been properly installed on the fuel pump outlet. A fuel leak could occur if the pipe was damaged, misaligned or improperly torqued during the recall repair. Safety Risk: Leaking fuel in the presence of an ignition source could increase the risk of a fire causing injury and/or property damage. Corrective Actions: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer for an inspection. If fuel leakage is detected, the fuel pipe will be replaced with a new one.
On certain vehicles, the steering wheel assembly may contain manufacturing defect, and could separate from the steering column while driving. This could result in a crash causing injury and/or damage to property. Correction: Dealers will inspect and if necessary install a revised steering wheel assembly.
On certain vehicles, the inflator diffuser installed in certain side curtain air bag modules may not have been manufactured correctly. If the vehicle were involved in a crash that warranted side curtain airbag deployment, this could potentially lead to the diffuser detaching. If the diffuser were to detach, it could become a projectile in the occupant compartment, and could cause a tear that could result in the side curtain airbag to not fully inflate. Both of these conditions could increase the risk of injury in a crash. Correction: Dealers will replace both the right and left hand side curtain airbags.
Hyundai Motor America (Hyundai) is recalling certain 2018 Santa Fe Sport vehicles. The side curtain air bags on these vehicles have a component that may detach during deployment of the inflatable curtain air bag.
If the component detaches during deployment, the curtain air bag may not inflate properly during a crash, increasing the risk of injury. Additionally, if the detached component were to enter the vehicle occupant compartment, there could be an increased risk of occupant injury.
Hyundai will notify owners, and dealers will replace the driver and passenger side curtain air bags, free of charge. The recall is expected to begin February 9, 2018. Owners may contact Hyundai customer service at 1-855-671-3059. Hyundai's number for this recall is 171.
Hyundai Motor America (Hyundai) is recalling certain 2018 Santa Fe Sport vehicles. The front coil springs may have been improperly manufactured and, as a result, may fracture under certain loads while driving.
If the coil spring fractures, it can puncture the tire, causing a loss of vehicle control and increasing the risk of a crash.
All of the affected vehicles are currently unsold on dealer lots. Dealers will replace both front coil springs, free of charge prior to the vehicle's sale. The recall began November 6, 2017. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 167.
On certain vehicles, the bolt which fastens the driver’s seat belt anchor to the vehicle’s inner sill structure may not have been tightened to specification during assembly. This could result in the driver's seat belt possibly detaching from the anchor point. If the vehicle were to be involved in a collision, and the seat belt were to detach, it could increase the risk of injury to the seat occupant. Correction: Dealers will verify the proper connection between the driver’s seat belt anchor and to the vehicle’s inner sill structure.
Generated by Cardog • December 13, 2025
Safety Recalls & Notices
Requires attention