2011 Hyundai Santa Fe
Safety Recalls & Notices
9 Active Recalls
Requires attention
Label
Summary
Issue: On certain vehicles, the compliance label may be missing information in French. The words listed on the label for "Tires", "Rims", "Front" and "Rear" appear in English only, when they should be listed as "Tires/Pneus", "Rims/Jantes", "Front/Avant" and "Rear/Arriere". Canadian regulations require this information to be listed on the label in both English and French. Safety Risk: These small errors do not affect vehicle safety. Corrective Actions: This is not a recall. The company has corrected the compliance label for all new vehicles.
Engine
Summary
Issue: Hyundai Auto Canada is conducting a Product Improvement Campaign that provides an update to the engine control module to detect potential problems before an engine fails. An engine failure would cause a sudden loss of power with an inability to restart. Note: This only affects Santa Fe models equipped with a 2.4 L MPI engine, and Veloster models with a 1.6 L GDI engine. Safety Risk: A sudden loss of engine power could increase the risk of an accident. An engine failure could also create the risk of a fire. Corrective Actions: Hyundai will notify owners by mail and advise you to take your vehicle to a dealer to update the software for the engine control module. Note: Hyundai recommends that you should always follow the correct vehicle maintenance schedule, which is printed in the Owner's Manual. If you experience unusual engine noise, reduced power, or a check engine/oil warning light, Hyundai advises you to immediately visit a Hyundai dealership to have your vehicle diagnosed.
Electrical
Summary
Issue: Certain vehicles may be equipped with an accessory trailer wiring harness kit that could fail. Over time, this could result in a short circuit that can cause overheating of the control module. Note: This recall only affects Hyundai Genuine Accessory trailer wiring harness kits that were manufactured by third parties and sold in Canada. These kits may have been ordered at the time of a vehicle purchase, or purchased separately from a dealer as an aftermarket accessory. Safety Risk: A short circuit could create a fire risk. This risk remains even when the vehicle is parked. Corrective Actions: Hyundai will notify owners by mail and instruct you to inspect your vehicle to see if it has an affected trailer wiring harness installed. If it does, Hyundai will advise you to take your vehicle to a dealer to install a redesigned trailer wiring harness. Hyundai recommends that you should park your vehicle outdoors, and away from other vehicles or structures until the recall repairs have been completed.
Suspension
Summary
On certain vehicles, the front suspension coil springs may be susceptible to corrosion. Over time, corrosion could cause the springs to fail, potentially damaging front tires and causing rapid air loss and/or tire failure, which could increase the risk of a crash causing injury and/or property damage. Correction: Dealers will inspect and repair or replace coil springs as necessary, under a special service campaign.
Electrical
Summary
On certain vehicles, the stop lamp switch may fail and cause intermittent operation of the brake lights. Failure of the brake lights to illuminate when the brake pedal is depressed could result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the switch.
EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH
Summary
Hyundai Motor Company (Hyundai) is recalling certain model year 2006-2009 Accent, model year 2007-2011 Azera, Sonata and Sante Fe,2006-2011 Tucson, 2009-2011 Elantra Touring, 2007-2010 Elantra, 2008-2011 Veracruz, 2009-2011 Genesis, 2010-2011 Genesis Coupe, 2007-2008 Entourage, and 2006-2008 Tiburon vehicles. Originally, in April 2013, Hyundai recalled 1,059,824 model year 2007-2009 Accent and Tucson, model year 2007-2010 Elantra, model year 2007-2011 Santa Fe, model year 2008-2009 Veracruz, model year 2010-2011 Genesis Coupe, and model year 2011 Sonata vehicles. In September 2013, Hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. The total number of vehicles being recalled is now 1,712,336. In the affected vehicles, the stop lamp switch may malfunction. A malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. Additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the PARK position and cause the Electronic Stability Control (ESC) malfunction light to illuminate.
Potential Consequence
Failure to illuminate the stop lamps during braking or inability to disengage the cruise control could increase the risk of a crash. Additionally, when the ignition is in the 'ON' position, the transmission shifter may be able to be moved out of Park without first applying the brake. This may lead to unintentional movement of the car which may increase the risk of a crash.
Remedy
Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. The safety recall began on April 22, 2013. Owners may contact Hyundai at 1-800-633-5151. Hyundai's recall campaign number is 110.
EQUIPMENT
Summary
CURT MANUFACTURING IS RECALLING CERTAIN TOW PACKAGE WIRING HARNESSES, PART NUMBER 55538, THAT CONNECT TOW VEHICLE LIGHTING CIRCUITS TO TRAILER LIGHTING CIRCUITS SOLD FOR USE ON CERTAIN MODEL YEAR 2009 THROUGH 2011 HYUNDAI SANTA FE VEHICLES. THE UNITS ARE NOT WATER-TIGHT AND MOISTURE CAN SEEP INTO THE CONVERTER MODULE AND DEFEAT THE MODULE'S INTERNAL CIRCUIT PROTECTION.
Potential Consequence
WITHOUT THE CIRCUIT PROTECTION, THE MODULE CAN OVERHEAT POSSIBLY RESULTING IN A FIRE.
Remedy
CURT MANUFACTURING WILL NOTIFY OWNERS AND REPLACE THE TOW PACKAGE WIRING HARNESS. THE REMEDY WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 17, 2011. OWNERS MAY CONTACT CURT MANUFACTURING AT 1-715 831-8713.
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER
Summary
HYUNDAI IS RECALLING CERTAIN MODEL YEAR 2011 SANTA FE VEHICLES MANUFACTURED FROM SEPTEMBER 28, 2010, THROUGH NOVEMBER 25, 2010. SOME OF THE REAR BRAKE CALIPERS MAY NOT HAVE BEEN PROPERLY MACHINED.
Potential Consequence
AS A RESULT, BRAKE FLUID WILL LEAK, FOLLOWED BY ILLUMINATION OF THE MALFUNCTION INDICATOR LIGHT INDICATING THE BRAKE FLUID LEVEL IS LOW AND SHOULD BE CHECKED, THEN A SOFT OR SPONGY BRAKE PEDAL FEEL, AND IF NOT SERVICED, REDUCED BRAKING POWER WHICH COULD INCREASE THE RISK OF A CRASH.
Remedy
DEALERS WILL INSPECT THE REAR CALIPERS AND REPLACE IT IF NECESSARY FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 17, 2010. OWNERS MAY CONTACT HYUNDAI ROADSIDE ASSISTANCE AT 1-800-243-7766.
Brakes
Summary
On certain vehicles, the rear brake calipers may not have been properly machined and, as a result, brake fluid will leak due to improper sealing. If this occurs, the Low Brake Fluid Level Warning Light on the instrument panel will illuminate indicating that the brake fluid level should be attended to by the driver. If the vehicle continues to be driven with the Low Brake Fluid Level Warning Light illuminated, the driver will experience a soft or spongy brake pedal. In addition if both of these indicators are ignored, braking performance will be reduced. Correction: Dealers will inspect and replace if necessary the affected caliper(s).
Generated by Cardog • December 11, 2025
2011 Hyundai Santa Fe
Safety Recalls & Notices
9 Active Recalls
Requires attention
