Safety Recalls & Notices
Requires attention
Honda (American Honda Motor Co.) is recalling certain 2001-2002 Acura 3.2CL, 2000-2003 Acura 3.5RL, 2000-2001 Acura 3.2TL, Honda CR-V and Honda Odyssey, 2001-2002 Acura MDX and 2000 Accord Coupe, Accord Sedan, Civic Coupe, and Civic Sedan vehicles. These vehicles may have received a replacement driver frontal air bag module as part of a vehicle repair. Due to a manufacturing issue, the replacement NADI inflator may absorb moisture, causing the inflator to rupture or the air bag cushion to underinflate.
In the event of a crash necessitating air bag deployment, an inflator rupture may result in metal fragments striking the driver or other occupants. An underinflated air bag cushion may not properly protect the occupant. These scenarios increase the risk of serious injury or death.
Honda will notify owners, and dealers will inspect the air bags in the vehicles, replacing the driver frontal air bag inflator with an inflator of a different design, as necessary, free of charge. The recall began October 1, 2020. Owners may contact American Honda's Customer Support & Campaign Center at 1-888-234-2138.
Honda (American Honda Motor Co.) is recalling certain 1998 Acura 2.2CL, 1998-1999 Acura 2.3CL, 1998-1999 Acura 3.0CL, 2001 Acura 3.2CL and Acura MDX, 1998-2000 Honda Accord Coupe, Accord Sedan, Civic Sedan, Odyssey and Acura 3.5RL, 1999-2000 Acura 3.2TL, 1996-2000 Civic Coupe, 1997-2000 CR-V, 1997-1998 EV Plus, and 1998-1999 Isuzu Oasis vehicles. These vehicles were equipped with Non-Azide Driver air bag Inflators (NADI) and do not contain phase stabilized ammonium nitrate (PSAN) propellant. Due to a manufacturing issue, the NADI inflators may absorb moisture, causing the inflators to rupture or the air bag cushion to underinflate.
In the event of a crash necessitating air bag deployment, an inflator rupture may result in metal fragments striking the driver or other occupants. An underinflated air bag cushion may not properly protect the occupant. These scenarios increase the risk of serious injury or death.
Honda will notify owners, and dealers will inspect the driver frontal air bag inflator, and replace it if necessary, with an inflator of a different design, free of charge. The recall began October 1, 2020. Owners may contact American Honda's Customer Support & Campaign Center at 1-888-234-2138 or Isuzu customer service at 1-800-255-6727.
Issue: On certain vehicles, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Note: This recall is for airbag inflators that may have been installed when the vehicle had the steering wheel airbag replaced. Safety Risk: In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury. Corrective Actions: The company will notify owners by mail. There may be a significant delay before replacement parts are available. The company will send you a second letter once replacement parts are available and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. If the inflator requires replacement, a newly design part will be installed.
Issue: On certain vehicles, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Safety Risk: In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury. Corrective Actions: The company will notify owners by mail. There may be a significant delay before replacement parts are available. The company will send you a second letter once replacement parts are available and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. If the inflator requires replacement, a newly design part will be installed.
On certain vehicles, a dash light dimmer circuit, mounted in the multiplex control unit may be damaged by heat build-up if the dimmer circuit is operated at a setting that is less than full intensity. This would cause a transistor in the module to fail resulting in loss of instrument cluster lighting. Such a condition would prevent the driver from reading the speedometer or other instruments when operating the vehicle in the dark. Correction: Multiplex unit will be replaced.
VEHICLE DESCRIPTION: MINI VANS. THE DIMMER CONTROL FOR THE INSTRUMENT PANEL LIGHTS CAN FAIL.
AT NIGHT, THE DRIVER WOULD NOT BE ABLE TO SEE INSTRUMENT PANEL GAUGES AND DISPLAYS.
DEALERS WILL REPLACE THE MULTIPLEX UNIT.
VEHICLE DESCRIPTION: MINIVAN. THE SLIDING DOORS MAY NOT LATCH PROPERLY.
AN IMPROPERLY LATCHED DOOR COULD OPEN UNEXPECTEDLY WHILE THE VEHICLE IS IN MOTION. UNDER CERTAIN CIRCUMSTANCES, A DOOR COULD OPEN COMPLETELY. AN UNRESTRAINED REAR SEAT PASSENGER COULD FALL OUT OF AN OPEN DOOR OF A MOVING VEHICLE AND BE SERIOUSLY INJURED OR KILLED.
DEALERS WILL REPLACE THE DOOR LATCH ASSEMBLY ON ALL ODYSSEY MINVANS BUILT FROM DECEMBER 3, 1999 THROUGH DECEMBER 16, 1999. ALSO INCLUDED IN THIS RECALL ARE APPROXIMATELY 1,612 ODYSSEY MINIVANS THAT HAD THE LATCHES REPLACED UNDER RECALL 99V-158 OR UNDER WARRANTY, THAT MAY NEED TO HAVE THE LATCHES REPLACED AGAIN. OWNERS OF THESE VEHICLES WILL BE NOTIFIED BY HONDA TO BRING THE VEHICLE TO THEIR HONDA DEALER FOR INSPECTION OF THE PREVIOUSLY REPLACED LATCH ASSEMBLY. LATCHES WITH THE SUSPECT DATE CODE WILL BE REPLACED.
On certain vehicles, a wire harness located within the engine compartment may be damaged by contact with a metal pipe, possibly resulting in a blown fuse. If a fuse blows, engine power, or operation of any or all electrical components, can be lost, including lights, windshield wipers, horn and the anti-lock function of the brakes. Correction: Dealers will install protective, corrugated plastic tubing over the wire harness and pipe. Any damaged wires will be repaired or replaced.
VEHICLE DESCRIPTION: MINI VANS. A WIRE HARNESS, LOCATED WITHIN THE ENGINE COMPARTMENT, COULD BE DAMAGED BY CONTACT WITH A METAL PIPE, POSSIBLY RESULTING IN A BLOWN FUSE.
IF A FUSE BLOWS, ENGINE POWER, OR OPERATION OF ANY OR ALL ELECTRICAL COMPONENTS, CAN BE LOST, INCLUDING LIGHTS, WINDSHIELD WIPERS, HORN, AND THE ANTI-LOCK FUNCTION OF THE BRAKES. A SUDDEN LOSS OF POWER OR LIGHTING, OR A FAILURE OF THE WINDSHIELD WIPERS OR ANTI-LOCK BRAKE FEATURE IN BAD WEATHER, COULD RESULT.
DEALERS WILL INSTALL A PROTECTIVE COVERING OVER THE WIRE HARNESS AND METAL PIPE TO PREVENT THIS PROBLEM. IF ANY WIRES ARE DAMAGED, THE DEALER WILL MAKE THE NECESSARY REPAIRS, AND THEN INSTALL THE PROTECTIVE COVERING.
VEHICLE DESCRIPTION: MINIVANS. THE FRONT BODY/FRAME IS MISSING SPOT WELDS.
THE MISSING WELDS MIGHT AFFECT THE OCCUPANT PROTECTION PERFORMANCE IN A COLLISION.
DEALERS INSPECTED ALL THE VEHICLES AND THEY WERE FOUND TO BE PROPERLY WELDED.
Generated by Cardog • December 10, 2025
Safety Recalls & Notices
Requires attention