2015 Ford Focus
Safety Recalls & Notices
We found 21 safety recalls for the 2015 Ford Focus. Recalls are sourced from both NHTSA (US) and Transport Canada databases. Contact your authorized Ford dealer to schedule free repairs.
Summary
Issue: On certain vehicles, the engine block heater could leak coolant. If this happens, the block heater could short circuit when it's plugged in. Note: This recall only affects certain vehicles equipped with a 2.0 L engine. Safety Risk: A short circuit can create the risk of a fire. Corrective Actions: To reduce the safety risk, Ford advises you not to use the engine block heater until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the block heater.
Summary
On certain vehicles, the Canister Purge Valve (CPV) may stick open and cause excessive vacuum in the fuel system that could deform the fuel tank. If this were to occur, it could cause: a malfunction indicator light (MIL) to illuminate, erratic readings on the fuel gauge, and/or the engine may stall. This could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will reprogram the Powertrain Control Module (PCM) with new software and replace the CPV as necessary. If the CPV is replaced, dealers will inspect and replace the carbon canister, fuel tank and fuel delivery module as necessary. Note: In the interim, owners are advised to maintain at least 1/2 tank of fuel until the recall repair is performed.
Summary
Certain plug-in hybrid and electric vehicles were supplied with a 120V convenience charge cord that may be susceptible to overheating if there is a poor connection at the electrical outlet. This could result in increased cord temperatures, melting, and an increased risk of fire causing injury and/or damage to property. Correction: Dealers will replace the factory supplied 120V convenience cord with the latest version of the cord that includes thermal protection.
Summary
On certain vehicles equipped with 1.0L GTDI or 1.6L GTDI engines and manual transmissions, repeated high energy clutch slip can lead to premature clutch lining wear, reducing the mechanical properties of pressure plate material. Prolonged use, with a slipping clutch, could result in pressure plate fracture, which could cause breach of the clutch cover and transmission housing, potentially leading to a transmission fluid leak. A transmission fluid leak, in the presence of an ignition source, could increase the risk of a fire. Correction: Dealers will evaluate the clutch for wear and replace as needed and will install updated software that will detect and prevent prolonged clutch slip. For the Fusion model, dealers will replace the clutch assembly.
Summary
Certain vehicles equipped with manual transmissions fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 206 – Door Lock and Door Retention Components. The rear hatchback can be unlocked and unlatched with a single press of the interior latch release control button while the vehicle is in motion (less than 7 km/h), which is contrary to the requirements of the standard. As a result, unrestrained occupants may be at greater risk of injury. Correction: Dealers will reprogram the Body Control Module with updated software.
Summary
On certain vehicles, the pawl spring tab in the side door latch could break. This condition typically will prevent the door from latching. In certain situations where the door is able to be closed, the door may be partially latched and could unlatch while driving. This could increase the risk of injury to a vehicle occupant seated next to the door, or result in damage to property. Correction: If a door will not latch, dealers will replace all four door latches with a more robust part. Note: A door that is partially latched can cause the courtesy light to remain on, set a door ajar message in the instrument cluster and sound a door ajar chime to alert the driver that there is a door latch problem.
Summary
On certain Focus Electric vehicles, there may be increased friction and excessive wear of the differential pinion gear shaft due to an error in manufacturing. This could result in localized overheating and eventual fracture of the pinion shaft or pinion gears, which would result in a loss of motive power while driving and loss of the transmission park function without warning, which could allow the vehicle to roll away while in PARK, increasing the risk of injury and/or property damage. Correction: Dealers will install a new transmission differential assembly.
Summary
Certain vehicles may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 114 - Theft Protection and Rollaway Prevention. It may be possible for the engine to continue to run after turning the ignition key to the "off" position and removing the key (vehicles with standard ignition keys), or after pressing the Engine Start/Stop button (vehicles with push-button start and intelligent access keys), which is contrary to the requirements of the standard. As a result, a vehicle could be operated without the key, increasing the risk of theft or unintended vehicle movement, which could increase the risk of a crash causing injury and/or property damage and/or injury to bystanders. Correction: Dealers will update the body control module (BCM) software.
Summary
Ford Motor Company (Ford) is recalling certain 2013-2018 Focus, 2013-2019 Escape, and 2015-2016 MKC vehicles equipped with a 2.0L engine. The engine block heater may crack and develop a coolant leak, causing it to short circuit when the block heater is plugged in.
Potential Consequence
An electrical short circuit can increase the risk of a fire.
Remedy
Owners are advised not to plug in their block heater until the vehicle is remedied. Dealers will replace the block heater, free of charge. Interim letters, notifying owners of the safety risk, are expected to be mailed February 13, 2026. Additional letters will be sent once the final remedy is available, anticipated in April 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S01. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on January 16, 2026.
Summary
Ford Motor Company (Ford) is recalling certain 2013-2018 Focus, 2013-2019 Escape, and 2015-2016 MKC vehicles equipped with a 2.0L engine. The engine block heater may crack and develop a coolant leak, causing it to short circuit when the block heater is plugged in.
Potential Consequence
An electrical short circuit can increase the risk of a fire.
Remedy
Owners are advised not to plug in their block heater until the vehicle is remedied. Dealers will replace the block heater, free of charge. Interim letters, notifying owners of the safety risk, are expected to be mailed February 13, 2026. Additional letters will be sent once the final remedy is available, anticipated in April 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S01. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on January 16, 2026.
21 Active Recalls
Requires attention
2015 Ford Focus Recall FAQs
Common questions about recalls for this vehicle
Related Recall Checks
Compare recall history with competitors and alternatives to the 2015 Ford Focus.