Toyota · 2003–2025
37 known recalls affecting the Toyota Tacoma (2003–2025). Enter your VIN to check if your specific vehicle is affected, or browse by model year below.

Issue: On certain trucks, the front axle shaft(s) may not have been manufactured properly. As a result, the axle shaft(s) could break and prevent you from fully turning the steering wheel. Additionally, if the truck is parked and the parking brake isn't applied, the truck could roll away. Safety Risk: A steering wheel that can't be turned completely could increase the risk of a crash. A parked vehicle that rolls away could create the risk of an injury or a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your truck to a dealership to inspect and, if necessary, replace the front axle shaft assemblies.
Issue: On certain vehicles, a software problem could cause the combination meter in the instrument panel not to display when the vehicle is started. As a result, you may not be able to see certain information about the vehicle, including the speedometer, fuel gauge, warning lights and malfunction tell-tales. Note: This recall only affects vehicles equipped with a 12.3-inch display. Safety Risk: Warnings, tell-tales and gauges that don't display could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and advise you to take your vehicle to a dealership to update the combination meter software. For certain vehicles, the dealer will also inspect and, if necessary, replace the combination meter.
Issue: Under certain conditions, the rear brake hoses could become damaged. Over time, the brake hoses could fail and cause a brake fluid leak. If this happens, there could be reduced braking. Note: This recall only affects certain 4WD vehicles equipped with 16-inch brakes and 17-inch or 18-inch Toyota wheels. This recall replaces Transport Canada recall 2025-051. Vehicles that were repaired under that recall don't require this repair. Safety Risk: Reduced braking can cause extended stopping distances and increase the risk of a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to replace the rear brake hoses.
Issue: On certain vehicles, the steering wheel spiral cable assembly could disconnect. If this happens, the airbag (SRS) warning lamp would turn on, and the driver-front airbag wouldn't work in a crash. This may also cause the horn or other steering wheel-mounted controls not to work properly. Note: This recall replaces Transport Canada recall no. 2023-386. Vehicles that were repaired under that recall don't require this repair. Safety Risk: An airbag that doesn't work properly could increase the risk of injury in a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to inspect the production date of the spiral cable assembly, and replace it if necessary.
This recall was replaced by Transport Canada recall no. 2025-363. Issue: Under certain conditions, the rear brake hoses could become damaged. Over time, the brake hoses could fail and cause a brake fluid leak. If this happens, there could be reduced braking. Note: This recall only affects certain 4WD vehicles equipped with 16-inch brakes and 17-inch Toyota wheels. Safety Risk: Reduced braking can cause extended stopping distances and increase the risk of a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to replace the rear brake hoses.
Issue: On certain vehicles, the inspection completed by a Toyota dealer during recall SRC RF2 (Transport Canada recall no. 2023-386) may not have been done correctly. As a result, a second inspection is required. On certain vehicles, the steering wheel spiral cable assembly could disconnect. If this happens, the airbag (SRS) warning lamp would turn on, and the driver-front airbag wouldn't work in a crash. This may also cause the horn or other steering wheel-mounted controls not to work properly. Safety Risk: An airbag that doesn't work properly could increase the risk of injury in a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to inspect the production date of the spiral cable assembly, and replace it if necessary.
Issue: On a small number of trucks, the information on the tire and loading information label may be incorrect. This could lead you to overload the vehicle, inflate the tires incorrectly, and/or use the wrong rims and tires. This could lead to poor handling and/or a tire failure. Safety Risk: Poor handling or a tire failure could cause a loss of control and increase the risk of a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your truck to a dealership to inspect and, if necessary, replace the tire and loading information label.
Issue: On certain trucks, the axle housing(s) may not have been manufactured properly. As a result, the axle retaining nuts could loosen and detach. If this happens, the axle shaft(s) could separate from the axle housing(s). This could cause reduced braking and/or reduced vehicle stability. Note: This problem could cause noise, vibration and/or a differential oil leak. Safety Risk: Reduced braking can cause extended stopping distances. Reduced vehicle stability could cause a loss of control. Both issues could increase the risk of a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your truck to a dealership to inspect the rear axle assembly and retighten the axle retaining nuts. If weld spatter is found, it will be removed. Any damaged axle components will be repaired or replaced, as necessary.
This recall was replaced by Transport Canada recall no. 2025-242. Issue: On certain vehicles, the steering wheel spiral cable assembly could disconnect. If this happens, the airbag (SRS) warning lamp would turn on, and the driver-front airbag wouldn't work in a crash. This may also cause the horn or other steering wheel-mounted controls not to work properly. Safety Risk: An airbag that doesn't work properly could increase the risk of injury in a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to inspect the production date of the spiral cable assembly, and replace it if necessary.
Issue: This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: This recall only affects the following block heater/cord part numbers: C014003034 PK5A408J09 PU14000904 C014003151 PK5A408J13 PU14000905 C014000885 PK5A489J11 PU14000907 C014000888 PK5A489J22 PU14000909 C014000907 PK5A410H00 PU14000911 C014100904 PU14000900 PU14000913 C014100907 PU14000901 PU14003571 C014100911 PU14000902 PK5A489J14 PK5A408J05 PU14000903 Safety Risk: Engine block heater wiring that overheats or melts could create the risk of a fire. Corrective Actions: Toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.
Showing 1-10 of 37 recalls
Check recalls for specific Toyota Tacoma model years