Campaigns on record across the Porsche 924 (1976–1988), from Transport Canada and, tagged NHTSA, the United States. Pick a model year for the Canadian listing, and check your VIN with Porsche to confirm which apply.
THE SHORT SECTION OF HIGH PRESSURE FUEL HOSE BETWEEN THE FUEL RAIL AND THE FUEL PRESSURE REGULATOR, WHICH RUNS ALONGSIDE THE INTAKE MANIFOLD, MAY BE SUBJECT TO HARDENING. IN THE EVENT THAT THIS LINE DOES HARDEN, FUEL LEAKS COULD DEVELOP BETWEEN THE HOSE AND METAL PIPE FITTINGS. LEAKING FUEL COULD IGNITE ON THE HOT EXHAUST SYSTEM AND LEAD TO AN ENGINE COMPARTMENT FIRE. CORRECTION: FUEL HOSE WILL BE REPLACED ON 924S, 944 AND 944 TURBO VEHICLES AND THE FUEL HOSE AND FUEL RAIL WILL BE REPLACED ON 944S VEHICLES.
1990051 · 2,527 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer · All 1988 porsche 924 recalls
THE HOSE MATERIAL USED IN THE SHORT SECTION OF THE HIGH PRESSURE FUEL LINE HOSE, BETWEEN THE FUEL RAIL AND FUEL PRESSURE REGULATOR, IS SUBJECT TO HARDENING, AND COULD CAUSE FUEL LEAKS BETWEEN THE HOSE AND THE METAL PIPE FITTINGS.
FUEL LEAKS COULD IGNITE ON THE HOT EXHAUST SYSTEM, OR ANY OTHER SOURCE OF IGNITION, RESULTING IN AN ENGINE COMPARTMENT FIRE.
REPLACE FUEL LINE HOSE WITH HOSES MADE OF IMPROVED MATERIAL.
90V061000 · 53,427 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer · All 1988 porsche 924 recalls
THE REAR SPRING PLATES (RADIUS ARMS) ON THESE VEHICLES MAY HAVE BEEN IMPROPERLY TEMPERED BY SUPPLIER. IMPROPERLY HARDENED SPRING PLATES COULD CRACK AND POSSIBLY BREAK . THIS COULD AFFECT LATERAL GUIDANCE OF THE CORRESPONDING REAR WHEEL RESULTING IN LOSS OF VEHICLE CONTROL.
1985110 · 109 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer · All 1982 porsche 924 recalls
REAR SPRING PLATES MAY NOT HAVE BEEN TEMPERED AND ARE NOT OF THE PROPER HARDNESS VALUE. CONSEQUENCE OF DEFECT: THE PLATES COULD CRACK AND/OR BREAK, AFFECT LATERAL GUIDANCE OF THE REAR WHEEL, AND RESULT IN LOSS OF CONTROL OF THE CAR WHICH MAY CAUSE AN ACCIDENT.
TEST TO IDENTIFY SPRING PLATES WHICH ARE IMPROPERLY HARDENED AND REPLACE AS NECESSARY.
85V095000 · 4,193 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer · All 1982 porsche 924 recalls
THESE VEHICLES DO NOT COMPLY WITH CMVSS 208 - SEAT BELTS.
1983098 · 551 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer · All 1982 porsche 924 recalls
THE REAR SEAT BELTS DO NOT INCLUDE EMERGENCY-LOCKING OR AUTOMATIC-LOCKING RETRACTORS. THE BELTS DO NOT COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, "OCCUPANT CRASH PROTECTION".
RECALLED VEHICLES WILL HAVE THE RIGHT REAR SEAT BELT AND A PORTION TO THE LEFT BELT REPLACED WITH RETRACTABLE BELTS.
83V111000 · 26,300 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer · All 1982 porsche 924 recalls
THE BRIDGE IN THE SEAT BELT BUCKLE LOCKING MECHANISM OF THE FRONT SEAT BELT ASSEMBLY MAY HAVE BEEN IMPROPERLY BENT. THE BUCKLE MAY NOT HOLD PROPERLY AND WILL RELEASE, IF EXTREME FORCES ARE APPLIED.
THE DEALER WILL INSPECT AND, IF NECESSARY, REPLACE THE SEAT BELTS ON THE INVOLVED VEHICLES AT NO COST TO OWNER.
79V222000 · 517 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer · All 1980 porsche 924 recalls
76V185000 · 3,072 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer · All 1977 porsche 924 recalls
Porsche 924 by year
Related recall checks
Check recalls for specific Porsche 924 model years