Newest first. Many cover only part of a model year, so check your VIN with Audi before booking a repair.
Transport Canada · listed for this model year
Issue: On certain vehicles, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. Safety Risk: In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly. This could create a risk of injury. Corrective Actions: The company will notify owners by mail. There may be a significant delay before replacement parts are available. The company will send you a second letter once replacement parts are available and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. If the inflator requires replacement, a newly design part will be installed.
2020032 · 9,165 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer
On certain vehicles the tie rods of the steering assembly may be inadequately sealed to prevent moisture and dust particles from entering the swivel bearing mechanism. If moisture and/or dust particles enter the swivel bearing mechanism, the swivel bearing could wear over time diminishing the steering control of the vehicle. Correction: Dealers will replace the tie rods.
2002104 · 2,853 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer
On certain vehicles, the steering assembly tie rod seals do not seal properly. If moisture and/or dust particles enter the swivel bearing mechanism, the swivel bearing may wear over time to a point where the steering begins to feel "loose" and could diminish the steering control of the vehicle with the potential for a vehicle crash. Correction: Tie rods will be replaced on affected vehicles.
1999195 · 4,900 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer
United States records (NHTSA) · 7
These are NHTSA campaigns for 1999 Audi A4 vehicles sold in the United States. They are not Canadian recalls: NHTSA's VIN lookup has no Canadian data, and a US campaign may have no Canadian counterpart, or one under a different number covering different vehicles. For a vehicle sold in Canada, go by the Transport Canada listing above and Audi's Canadian VIN lookup.
Volkswagen Group of America, Inc. (VW) is recalling certain 2000-2001 TT Roadster, 2000 TT Coupe, 1999 Audi A8, 1998-2000 Audi A6, and 1999-2000 Audi A4 vehicles equipped with Non-Azide Driver air bag Inflators (NADI) that do not contain phase stabilized ammonium nitrate (PSAN) propellant. Due to a manufacturing issue, the NADI inflators may absorb moisture, possibly causing the air bag to deploy improperly in the event of a crash.
In the event of a crash necessitating air bag deployment, the air bag may not properly protect the occupant, increasing the risk of serious injury or death.
Dealers will replace the driver frontal air bag inflator with an alternative inflator when the parts become available, free of charge. Owner notifications were mailed September 21, 2021. Owners may contact Audi customer service at 1-800-253-2834. Volkswagen's number for this recall is 69BT.
20V056000 · 1,06,857 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer
The Gates Corporation (Gates) is recalling certain aftermarket Tru-Flow Water Pumps, part number TFW 41127, sold at certain NAPA Auto Parts and/or installed by automotive service technicians after November 1, 2013 (and manufactured August 2013 through October 2013) that have a black-colored pulley/sprocket or do not have 'US9377' stamped on the water pump housing. These service replacement parts were sold for use in model year 1999-2005 Audi A4, 2000-2006 Audi TT, 1998-2005 Volkswagen Beetle, 1999-2006 Golf, 1999-2008 and 2011-2013 Volkswagen Jetta, and 2000-2005 Volkswagen Passat. In the affected water pumps, the pulley or sprocket that turns the timing belt may develop microfractures causing the timing belt to fail.
A failure of the timing belt may cause the engine to shut down, potentially increasing the risk of a vehicle crash.
Gates will notify owners, and dealers will replace the water pump, free of charge. The recall began during May 2014. Owners may contact The Gates Corporation at 1-303-744-1911.
14E007000 · 50 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer
CERTAIN AAI MOTORSPORTS COMBINATION LAMPS SOLD AS REPLACEMENT LAMPS FOR USE ON THE ABOVE LIST PASSENGER VEHICLES. COMBINATION LAMPS NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."
LACK OF AMBER SIDE REFLECTORS IN THE LAMPS WILL DECREASE LIGHTING VISIBILITY TO OTHER DRIVERS AND MAY POSSIBLY RESULT IN A VEHICLE CRASH
AAI MOTORSPORTS WILL NOTIFY OWNERS AND REPLACE THE LAMPS FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 1, 2006. OWNERS MAY CONTACT AAI MOTORSPORTS AT 909-923-9188.
06E060000 · 87,745 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer
CERTAIN CK MOTORSPORTS COMBINATION HEADLIGHTS, CLEAR CORNER, BUMPER, AND SIDE MARKER LIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON THE PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING.
CK MOTORSPORT WILL NOTIFY OWNERS AND REPLACE THE NONCOMPLIANT LAMPS FREE OF CHARGE. THE RECALL BEGAN ON JULY 1, 2006. OWNERS MAY CONTACT CK MOTORSPORT AT 1-909-610-7211.
06E049000 · 27,176 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE TIE RODS OF THE STEERING ASSEMBLY ARE PROTECTED ON EACH SIDE BY A SEAL TO PREVENT MOISTURE AND DUST PARTICLES FROM ENTERING THE SWIVEL BEARING MECHANISM. IT IS POSSIBLE THAT SOME TIE ROD SEALS MAY NOT SEAL PROPERLY.
IF MOISTURE AND/OR DUST PARTICLES ENTER THE SWIVEL BEARING MECHANISM, THE SWIVEL BEARING COULD WEAR OVER TIME DIMINISHING THE STEERING CONTROL OF THE VEHICLE.
DEALERS WILL REPLACE THE TIE RODS.
00V414000 · 83,000 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE TIE RODS OF THE STEERING ASSEMBLY ARE PROTECTED ON EACH SIDE BY A SEAL TO PREVENT MOISTURE AND DUST PARTICLES FROM ENTERING THE SWIVEL BEARING MECHANISM. IT IS POSSIBLE THAT SOME TIE ROD SEALS MAY NOT SEAL PROPERLY.
IF MOISTURE AND/OR DUST PARTICLES ENTER THE SWIVEL BEARING MECHANISM, THE SWIVEL BEARING COULD WEAR OVER TIME DIMINISHING THE STEERING CONTROL OF THE VEHICLE.
DEALERS WILL REPLACE THE TIE RODS.
99V248000 · 51,900 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer
VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH AUTOMATIC TRANSMISSIONS. A CONTROL VALVE IN THE VACUUM HOSE CONNECTING THE BRAKE BOOSTER TO THE INTAKE MANIFOLD MAY NOT OPEN OR CLOSE FULLY AT TEMPERATURES BELOW -4 F UNDER CERTAIN DRIVING CONDITIONS.
THIS CONDITION COULD CAUSE INSUFFICIENT VACUUM TO BE PROVIDED TO THE BRAKE BOOSTER.
DEALERS WILL INSTALL A VACUUM BY-PASS SYSTEM INTO VEHICLES OPERATED IN THESE STATES WHICH IS DESIGNED TO PROVIDE SUFFICIENT VACUUM FOR FULL BRAKE ASSIST UNDER ALL WEATHER CONDITIONS.
99V131001 · 88,121 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer
1999 Audi A4 recall questions
Transport Canada lists 3 recalls for the 1999 Audi A4 model year. That counts campaigns naming this model year, not recalls on your vehicle: many cover only a VIN range or production window, and some only vehicles found on inspection. NHTSA lists 7 United States campaigns for the US-market model, shown separately; a US campaign may have no Canadian equivalent.
Enter your VIN in Audi's Canadian recall lookup, or call a Audi dealer with your VIN. In Canada the manufacturer is responsible for showing recall and repair status for each VIN, so its lookup is the authoritative answer. Cardog uses your VIN only to find the model year; the recalls shown here are listed for that model year and are not matched to your VIN.
Not necessarily. NHTSA campaigns cover vehicles sold in the United States, and NHTSA's VIN lookup has no Canadian data. When a defect also affects Canadian vehicles, the manufacturer files a separate notice with Transport Canada, often under a different number and sometimes covering a different set of vehicles. For a Canadian vehicle, go by the Transport Canada listing and Audi's Canadian lookup.
Safety recall repairs are normally done at no charge by an authorised Audi dealer. The manufacturer's notice for each campaign sets out the remedy and any conditions, so confirm with the dealer when you book.
Once Audi's lookup or a dealer confirms a recall applies, book the repair with an authorised Audi dealer and bring your VIN. If the manufacturer's notice says not to drive the vehicle or to park it outside, follow that instruction. Parts can take time, so book early.
Follow the manufacturer's notice for that recall. Most allow normal driving until the repair; some tell owners to stop driving or to park outside until it is fixed. Cardog does not grade recalls by severity: the manufacturer's notice and your dealer are the source.
Manufacturers must notify owners they have on record. If you bought the vehicle used or have moved, update your details with Audi Canada so notices reach you, and check the manufacturer's lookup from time to time.
Related recall checks
Compare recall listings with alternatives to the 1999 Audi A4.