2009 Subaru Impreza 2.5i-S

1. Airbag2 Jan 2020

   2020001

   Issue: This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the passenger-front airbag inflator. The passenger-front airbag module or inflator will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

2. Electrical18 Apr 2019

   2019191

   Issue: A problem with certain replacement ignition switches may allow the key turn out of the “ON” position while driving. This could cause the engine to turn off suddenly. It could also cause the airbag system not to work properly in a crash. Note: This is a voluntary service campaign that is not being conducted under the requirements of the Motor Vehicle Safety Act. This problem only affects certain parts used for replacement of original parts. Safety Risk: A sudden loss of engine power could increase the risk of a crash. An airbag system that does not work properly in a crash could cause an increased risk of injuries. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to inspect the ignition switch, and replace it as necessary.

3. Brakes1 Mar 2019

   2019104

   Issue: On certain vehicles, the brake lamp switch could fail. This would cause the brake lamps not to turn on when the brakes are applied. Depending on the model, this could cause an inability to shift from park or to start using the push-button ignition. This may also cause problems with the following: anti-lock brake system (ABS), vehicle dynamics control (VDC), and/or Eyesight system. Safety Risk: If the brake lights do not work, a following driver may not to recognize that a vehicle ahead is braking, increasing the risk of crash. Corrective Actions: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the brake lamp switch replaced.

4. Airbag10 Jan 2018

   2018019

   On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.

5. Electrical7 Oct 2016

   2016492

   On certain turbocharged vehicles, the relay which controls the secondary air injection pump may have been manufactured incorrectly. As a result, the relay may allow the pump to operate continuously. If this condition were to occur, the pump may overheat and melt, causing burning smell or smoke and possibly resulting in a fire. This could increase the risk of injury and/or damage to property. Correction: Dealers will install a revised relay.

6. Brakes22 Dec 2014

   2014586

   On certain vehicles, the center and rear brake lines may become perforated due to corrosion. This would cause a leak in the brake system potentially increasing stopping distances, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect vehicles and either apply an anti-corrosion coating to the 4-way joint connector and brake lines, or replace them as necessary. Note: This recall supersedes recall 2013092 and 2014223. Vehicles that were inspected and/or repaired under the previous recall will require re-inspection and/or repair.

Listed for the model year, not checked against this VIN. Check this VIN with Subaru Canada or ask a Subaru dealer.

United States: 15 NHTSA records for the model year, kept apart.