National Highway Traffic Safety Administration2022 Ford EscapeElectrical
The high-voltage plug-in hybrid battery system and Battery Energy Control Module (BECM) are affected, and the vehicle is available for inspection upon request
ODI Happened November 3, 2026Filed November 18, 2026
In the owner's words
The high-voltage plug-in hybrid battery system and Battery Energy Control Module (BECM) are affected, and the vehicle is available for inspection upon request. Prior to Ford Recall 25SC4 (NHTSA Recall ID 25V789), my 2022 Ford Escape PHEV consistently accepted 10.5 to 11.0 kWh on a full charge. Immediately after an authorized Ford dealership performed the 25SC4/25V789 software update, the vehicle stopped accepting more than 8.0 kWh per full charge—permanently eliminating roughly 20% of the battery's usable capacity and electric driving range. Instead of inspecting or replacing the defective Samsung SDI high-voltage battery cells responsible for internal short-circuit and fire risks, Ford's software update artificially capped the usable state of charge while displaying 100% on the dashboard. This leaves potentially defective cells in the vehicle rather than physically remediating the underlying thermal/fire hazard, and forces the gasoline engine to engage significantly more often. There were no warning lamps prior to the update; the capacity loss appeared immediately upon completion of the dealer recall service. The vehicle has not been inspected by police or insurance representatives, and the dealership only installed the recall software without performing physical cell testing.
An owner's report to NHTSA. NHTSA reads every complaint to decide what to investigate; it doesn't verify them, and a complaint is not a recall.