National Highway Traffic Safety Administration1999 Dodge DurangoElectrical, Other
1999 dodge durango pcm/ecu will fail when it gets hot, giving a no bus, and causing the engine to stall and lose power steering and brakes
ODI Happened July 23, 2017Filed August 16, 2017
In the owner's words
1999 dodge durango pcm/ecu will fail when it gets hot, giving a no bus, and causing the engine to stall and lose power steering and brakes. This has happened to my vehicle on numerous occasions at highway speed where I was barely able to control the vehicle. This is a huge safety issue. I have had the pcm/ecu replaced over 5 times, which is extremely dangerous. Experts have pin pointed the issues to certain chips coming unsoldered in the pcm/ecu due to heat. Keenan laws has youtube videos on exactly what the issues are, as well as many other have done. Dodge contract's out the soldering of these chips, but they don't do a good job as some don't work at all. For example, we put three in before we got one that worked. This is inexcusable and puts people lives at very high risk. I paid around $800 to a dodge dealership in santa rosa california for a pcm/ecu that lasted only months. It takes a tremendous amount of strength to control the durango with no power steering and brakes. Dodge hasn't been a help or the pcm/ecu rebuilders. Currently I'm waiting on another rebuilt pcm/ecu, which the rebuilder can't even give a time when I could get one. The date below is the most current incident, but this has been going on since about 2009 and approximately 170,000 miles.
An owner's report to NHTSA. NHTSA reads every complaint to decide what to investigate; it doesn't verify them, and a complaint is not a recall.