National Highway Traffic Safety Administration2009 Dodge ChallengerEngine, Powertrain

Overview: my 2009 dodge challenger r/t, with the 5.7l hemi engine and manual 6-speed transmission, has an excessive delay between pressing the throttle and a…

ODI Happened October 14, 2011Filed February 25, 2012

In the owner's words

Overview: my 2009 dodge challenger r/t, with the 5.7l hemi engine and manual 6-speed transmission, has an excessive delay between pressing the throttle and achieving engine response. This occurs only in gears 4-6, and is the result of a powertrain control module (pcm) update. Background: this vehicle has an electronic throttle ("drive by wire") system, where throttle response is controlled by the pcm and not via a throttle cable. History: on october 14, 2011, I brought my vehicle to my local dodge/chrysler dealership due to a rough engine idle. They informed me that a pcm update was available, based on technical service bulletin (tsb) 18-014-10. This update changed the engine calibration id from 05187899ae to 05187899ag. Ever since this update was performed, the vehicle has a significant (and unsafe) throttle delay while in gears 4-6. Basically, when the throttle is depressed, it takes about 2 seconds for the engine to respond. This has resulted in several near-collisions, during times where acceleration is expected to avoid an unsafe road condition but the vehicle fails to respond in a timely manner. To demonstrate the problem, you could actually rapidly pulse the throttle repeatedly without having any engine response at all. This issue affects all owners of 2009-2010 dodge challenger r/ts with the 05187899ag calibration id. As of this date, no pcm update has been released to correct this unsafe condition. *tr

An owner's report to NHTSA. NHTSA reads every complaint to decide what to investigate; it doesn't verify them, and a complaint is not a recall.