Newest first. Many cover only part of a model year, so check your VIN with BMW before booking a repair.
Transport Canada · listed for this model year
Issue: On certain motorcycles, the fuel pump flange could crack. If this happens, fuel could leak while the engine is running. Note: This recall only affects motorcycles that did not have the fuel pump replaced under Transport Canada recall 2013-442. Safety Risk: A fuel leak can create the risk of a fire. Corrective Actions: BMW will notify owners by mail and instruct you to take your motorcycle to a dealer to replace the fuel pump and auxiliary fuel pump (if equipped) with an improved version.
2020437 · 4,078 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
Certain motorcycles with dealer installed accessory turn signals may not comply with the requirements of Canada Motor Vehicle Safety Standard (CVMSS) 108 - Lighting System and Retroreflective Devices. The size of the lens on the accessory turn signals may be too small, and therefore would not meet the requirements of the standard. This could reduce vehicle conspicuity to following and approaching road users, and increase the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the accessory turn signals with factory indicators that meet the requirements of the standard.
2017428 · 8,961 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain motorcycles, the threaded holes on the rear wheel flange could crack if the wheel bolts are tightened beyond the specified torque limit during servicing. Over time, this could allow the bolts to back out of their threaded holes, causing the rear wheel to become loose. This could result in a loss of stability of the motorcycle, and increase the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the aluminum rear wheel flange with a steel flange.
2015101 · 5,343 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain motorcycles, cracks could develop in the fuel pump and/or auxiliary fuel pump flange (if equipped). This would result in fuel leaking when the engine is turned on and the fuel system is pressurized. Leaking fuel, in the presence of an ignition source, could lead to a fire causing injury and/or damage to property. Correction: Dealers will inspect the fuel pump flange(s) and install a reinforcing ring or replace the fuel pump(s), as necessary.
2013442 · 6,325 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain motorcycles, vibration, particularly on a long ride at constant high engine rpm and on engine overrun at high rpm, can, under certain circumstances, cause foaming of the brake fluid in the reservoir of the front brakes. This foaming may cause air to enter into the brake system, which can severely diminish the braking efficiency of the front brakes. Extended stopping distance may result in a vehicle crash causing property damage and/or personal injury. Correction: Dealers will install a screen insert into the front brake fluid reservoir.
2012334 · 230 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain motorcycles, due to environmental conditions, the bearings of the link lever attached to the rear strut could be subject to corrosion. This could lead to reduced movement of the link lever. Over time, if the corrosion became significant, restriction of movement of the link lever could occur. This could affect handling of the motorcycle. In an extreme case, this could result in the connecting rod breaking by a bending force, causing the rear wheel to decelerate by contact with the inner fender. This could lead to a crash depending on traffic, road conditions and rider's reactions. Correction: Dealers will replace the rear suspension relay lever.
2010395 · 1,496 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain motorcycles, it is possible for the coating to separate from the inside face of the steering damper housing. If this happens, the coating could partially clog the oil bores within the damper. Should this occur, the steering damper could become stiff, making it difficult to steer, and therefore could result in a vehicle crash causing personal injuries or death. Correction: Dealers will inspect and, if necessary, replace the steering damper.
2008267 · 104 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
On certain motorcycles, frequent short-trip usage, particularly at low ambient temperatures, causes condensation, increasing the proportion of water in the engine oil. The water vapour produced while the engine is running condenses at the outlet port of the dry-sump oil tank breather. If temperatures are below 0 degrees Celsius, the condensation can freeze and plug the breather line of the oil tank. As a result, oil tank over-pressurization can cause the tank to rupture, allowing oil to escape onto the rear wheel and create the risk of a crash causing injuries or death. Correction: Dealers will install an updated oil cap with a pressure relief valve.
2007019 · 515 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
United States records (NHTSA) · 7
These are NHTSA campaigns for 2007 BMW K 1200 S vehicles sold in the United States. They are not Canadian recalls: NHTSA's VIN lookup has no Canadian data, and a US campaign may have no Canadian counterpart, or one under a different number covering different vehicles. For a vehicle sold in Canada, go by the Transport Canada listing above and BMW's Canadian VIN lookup.
BMW of North America, LLC (BMW) is recalling certain 2009-2011 K1300 (S, GT), 2010-2011 S1000 RR, 2005-2011 R1200 (GS, GS Adventure, R, RT, S, ST), 2006-2010 HP2 (Enduro, Megamoto, Sport), 2005-2008 K1200 (R, R Sport, S, GT), and 2012 K1600 (GT, GTL) motorcycles that were repaired under recall 13V-617 with the support ring remedy and where the fuel pump was not replaced at a later date. This recall involves the fuel pump, and also the auxiliary fuel pump as applicable. The affected motorcycles have a fuel pump flange that may crack, possibly resulting in a fuel leak while the engine is running.
A fuel leak in the presence of an ignition source can increase the risk of a fire.
BMW will notify owners, and dealers will replace the fuel pump(s) with an improved version, free of charge. The recall began January 18, 2021. Owners may contact BMW customer service at 1-800-525-7417.
20V471000 · 16,926 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
BMW of North America, LLC (BMW) is recalling certain model year 2005-2010 R1200GS and R1200RT, 2006-2010 R1200GS Adventure, 2007-2010 R1200R, 2007 R1200S and K1200R Sport, 2005-2007 R1200ST, 2008-2009 HP2 Megamoto, 2006 HP2 Enduro, 2008-2010 HP2 Sport, 2005-2008 K1200S, 2006-2008 K1200R, K1200GT, 2009-2011 K1300S, 2010-2011 K1300R, and 2009-2010 K1300GT motorcycles. In the affected motorcycles, the rear wheel mounting flange may crack if the rear wheel mounting bolts are over tightened.
If the rear wheel mounting flange cracks, the mounting bolts may loosen and the rear wheel may not remain secured to the motorcycle, causing a loss of stability and increasing the risk of a crash.
BMW will notify owners, and dealers will replace the existing aluminum rear wheel flange with a steel one, free of charge. The recall began on May 7, 2015. Owners may contact BMW customer service at 1-800-525-7417.
15V141000 · 43,426 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
BMW of North America, LLC (BMW) is recalling certain model year 2005-2011 model year R-model motorcycles, model year 2005-2012 K-model motorcycles, model year 2010-2011 S 1000 model motorcycles, and model year 2006-2010 HP2 motorcycles. In the affected motorcycles, the fuel pump flange (and the auxiliary fuel pump flange if equipped) could develop cracks and leak fuel.
A fuel leak in the presence of an ignition source may result in a fire.
BMW will notify owners, and dealers will either reinforce the fuel pump flange or replace the pump, as necessary, free of charge. The recall began on April 16, 2014. Owners may contact BMW customer relations at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
13V617000 · 50,184 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
BMW is recalling certain model year 2007-2008 K1200 S, K1200 R, and K1200 R Sport motorcycles and 2012 and 2013 K1300 S motorcycles. In October 2012, BMW recalled 2062 2007-2008 K1200 S, K1200 R, and K1200 R Sport motorcycles. In November 2012, BMW informed the agency that it was adding model year 2012 and 2013 K1300 S (including HP Limited Edition) motorcycles to the recall campaign, representing an additional 421 units. The total number of motorcycles being recalled is now 2,483. In certain riding conditions, the brake fluid in the front brake fluid reservoir can foam.
Brake fluid that foams could lead to a reduced braking capability of the front brake system, possibly resulting in a crash.
The front brake fluid reservoir will be retrofitted with a screen insert, free of charge. The recall began on December 19, 2012. Owners may contact BMW at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
12V487000 · 2,483 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
BMW IS RECALLING CERTAIN MODEL YEAR 2005-2011 MOTORCYCLES. THE BEARINGS COULD BE SUBJECT TO CORROSION. THIS COULD LEAD TO REDUCED MOVEMENT OF THE LINK LEVER.
THIS COULD AFFECT THE HANDLING OF THE MOTORCYCLE INCREASING THE RISK A DRIVER MAY LOSE CONTROL OF THE VEHICLE RESULTING IN A CRASH.
BMW WILL NOTIFY OWNERS AND DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING MARCH 2011. OWNERS MAY CONTACT BMW AT 1-800-525-7417.
10V488000 · 11,826 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
BMW IS RECALLING 428 MY 2007 F800 S, F800 ST, R1200 R, K1200 S, K1200 R, K1200 R SPORT, AND K1200 GT MOTORCYCLES. IT IS POSSIBLE FOR THE COATING TO SEPARATE FROM THE INSIDE FACE OF THE STEERING DAMPER HOUSING. IF THIS HAPPENED, THE COATING COULD PARTIALLY CLOG THE OIL BORES WITHIN THE DAMPER.
IF THIS OCCURRED, THE STEERING DAMPER COULD BECOME STIFF INCREASING THE RISK OF A CRASH.
DEALERS WILL REPLACE THE STEERING DAMPER FREE OF CHARGE. THE RECALL BEGAN DURING SEPTEMBER 2008. OWNERS MAY CONTACT BMW AT 1-800-831-1117.
08V342000 · 428 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
ON CERTAIN MOTORCYCLES, FREQUENT SHORT TRIPS PARTICULARLY DURING COLD TEMPERATURES, CAN CAUSE WATER TO ACCUMULATE IN THE OIL TANK, AND WHEN THE ENGINE IS RUNNING, ESCAPING WATER VAPOR CAN CONDENSE ON THE OIL TANK AIR BLEED VALVE. IN FREEZING TEMPERATURES, THIS WATER COULD FREEZE AND BLOCK THE AIR BLEED VALVE.
IT IS POSSIBLE THAT A PRESSURE BUILD UP IN THE OIL TANK COULD CAUSE IT TO RUPTURE, ALLOWING OIL TO LEAK ONTO THE REAR TIRE. AN OIL LEAK COULD CAUSE A FIRE. OIL ON THE REAR TIRE COULD CAUSE LOSS OF CONTROL.
DEALERS WILL INSTALL A NEW OIL TANK CAP CONTAINING A VALVE TO PREVENT OVERPRESSURE IN THE TANK FREE OF CHARGE. THE RECALL BEGAN ON APRIL 10, 2007. OWNERS MAY CONTACT BMW AT 1-800-831-1117.
07V066000 · 6,631 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorized dealer
2007 BMW K 1200 S recall questions
Transport Canada lists 8 recalls for the 2007 BMW K 1200 S model year. That counts campaigns naming this model year, not recalls on your vehicle: many cover only a VIN range or production window, and some only vehicles found on inspection. NHTSA lists 7 United States campaigns for the US-market model, shown separately; a US campaign may have no Canadian equivalent.
Enter your VIN in BMW's Canadian recall lookup, or call a BMW dealer with your VIN. In Canada the manufacturer is responsible for showing recall and repair status for each VIN, so its lookup is the authoritative answer. Cardog uses your VIN only to find the model year; the recalls shown here are listed for that model year and are not matched to your VIN.
Not necessarily. NHTSA campaigns cover vehicles sold in the United States, and NHTSA's VIN lookup has no Canadian data. When a defect also affects Canadian vehicles, the manufacturer files a separate notice with Transport Canada, often under a different number and sometimes covering a different set of vehicles. For a Canadian vehicle, go by the Transport Canada listing and BMW's Canadian lookup.
Safety recall repairs are normally done at no charge by an authorized BMW dealer. The manufacturer's notice for each campaign sets out the remedy and any conditions, so confirm with the dealer when you book.
Once BMW's lookup or a dealer confirms a recall applies, book the repair with an authorized BMW dealer and bring your VIN. If the manufacturer's notice says not to drive the vehicle or to park it outside, follow that instruction. Parts can take time, so book early.
Follow the manufacturer's notice for that recall. Most allow normal driving until the repair; some tell owners to stop driving or to park outside until it is fixed. Cardog does not grade recalls by severity: the manufacturer's notice and your dealer are the source.
Manufacturers must notify owners they have on record. If you bought the vehicle used or have moved, update your details with BMW Canada so notices reach you, and check the manufacturer's lookup from time to time.
Related recall checks
Compare recall listings with alternatives to the 2007 BMW K 1200 S.