Oldsmobile · 1975–1999
29 known recalls affecting the Oldsmobile Cutlass (1975–1999). Enter your VIN to check if your specific vehicle is affected, or browse by model year below.

On certain vehicles, if a buildup of snow or ice restricts the movement of the passenger side wiper arm, the pivot housing can crack and the wipe will not operate. Reduced visibility in inclement weather could lead to a vehicle crash. Correction: Dealers will replace the side pivot housing on affected vehicles.
THESE VEHICLES DO NOT COMPLY WITH C.M.V.S.S. 1105-EVAPORATIVE EMISSIONS. VEHICLES MAY EXPERIENCE AN INOPERATIVE CANISTER PURGE THERMO VACUUM SWITCH.
THESE VEHICLES DO NOT COMPLY WITH C.M.V.S.S. 1105 - EVAPORATIVE EMISSIONS. VEHICLES MAY EXPERIENCE AN INOPERATIVE CANISTER PURGE THERMO VACUUM SWITCH. CORRECTION: CANISTER PURGE THERMO VACUUM SWITCH WILL BE REPLACED.
On certain vehicles, excessive enlargement of a pilot hole in the rear brake backing plate could allow the wheel cylinder to rotate possibly leading to loss of brake fluid in the rear brakes and loss of rear braking capability.this Would result in increased stopping distances and possible crash. note: vehicles in ontario and quebec only.
On certain vehicles, excessive enlargement of a pilot hole in the rear backing plate could allow the wheel cylinder to rotate possibly leading to loss of rear braking action.
THE AXLE RETAINING "C" CLIP IN THE DIFFERENTIAL MAY DISLODGE AND ALLOW THE AXLE, WHEEL AND BRAKE DRUM TO SEPARATE FROM THE VEHICLE WHEN SUBJECTED TO SIDE FORCES. AXLE SEPARATION COULD RESULT IN LOSS OF VEHICLE CONTROL AND POSSIBLE CRASH.
On certain vehicles, the heads of the rear seatbelt anchor bolts may break off during normal vehicle use and in the event of an accident in which the rear seatbelts are in use, the probability of injury to the wearer will be increased.
On certain vehicles, the rear brake backing plates may develop a corrosion condition which could result in loss of rear brake fluid and loss of rear braking capabilities. This recall affects vehicles sold in the Maritime provinces only.
THESE VEHICLES MAY NOT COMPLY WITH CMVSS 1101 - EMISSION DEVICES.
On certain vehicles, the front seat back locks may not lock under forward load conditions and are therefore not in compliance with CMVSS 207 - Seat Anchorages.
Showing 1-10 of 29 recalls
Check recalls for specific Oldsmobile Cutlass model years