National Highway Traffic Safety Administration1993 Dodge Grand CaravanEngine › Belts and associated pulleys
The serpentine belt tensioner fell off the vehicle
ODI Happened April 1, 2001Filed April 14, 2001
In the owner's words
The serpentine belt tensioner fell off the vehicle. I started the engine and noticed I couldn't steer the vehicle. I checked and saw that the belt tensioner fell off the vehicle. If I had been driving at highway speed and this happened I wouldn't be able to steer the vehicle. I inspected the failed component and could see that the stud which fastens the device to the engine block was broken due to a stress consentration in the stud material. It was not broken due to too much torque when attached to the block. I could tell this due to the fracture configuration. Typically a torsional fracture can be seen because the material is broken at a 45 degree angle. This fracture was due to a stress consentration in the material. Has this happened to anyone else? You probably couldn't tell because the vehicle, if traveling on the highway, would be so badly damaged you wouldn't know what caused the crash. I would suggest you look into this.*ak
An owner's report to NHTSA. NHTSA reads every complaint to decide what to investigate; it doesn't verify them, and a complaint is not a recall.