National Highway Traffic Safety Administration1991 Eagle TalonEngine, Engine › Belts and associated pulleys

I am investigating prior failures and/or actions taken in regard to failure of the timing belt auto-tensioner assembly

ODI Happened February 17, 2000Filed February 18, 2000

In the owner's words

I am investigating prior failures and/or actions taken in regard to failure of the timing belt auto-tensioner assembly. The timing & balancer belts were replaced under a manufacturer recall: 09594183 recall-594-timing belt. The work was performed again the following week at no-cost, after reporting "more than usual engine vibration." I suspected that the "balance shaft" was indexed 180 degrees out-of-phase, as this would be the only probable cause for "increased engine vibration." this was confirmed by the notes in the second invoice stating: "adjusted balance shaft; labor-2.5 hours." my other question is in regards to the dealer's liability for goods and services. If due care was not given, then proper service of a directly related component cannot be reasonably assumed. Therefore, the subsequent premature failure of the timing belt auto-tensioner assembly, could be linked to that service. Any information in regards to other cases of similar failures and answers to the legal questions would be very helpful. *ak

An owner's report to NHTSA. NHTSA reads every complaint to decide what to investigate; it doesn't verify them, and a complaint is not a recall.