National Highway Traffic Safety Administration2020 Ford ExplorerPowertrain

Illuminated powertrain malfunction (wrench) indicator with DTCs C00A6 and C0631, caused by failure of the front axle disconnect actuator/intermediate shaft o…

ODI Happened August 3, 2026Filed August 21, 2026

In the owner's words

Illuminated powertrain malfunction (wrench) indicator with DTCs C00A6 and C0631, caused by failure of the front axle disconnect actuator/intermediate shaft on an AWD 2020 Explorer at 46,821 miles. The vehicle displayed the wrench light along with "Service AdvanceTrac," "4WD Fault," "Hill Start Assist Not Available," and "Pre-Collision Assist Not Available." Multiple driver-assistance and stability systems disabled themselves simultaneously, including AdvanceTrac stability control and pre-collision braking. Loss of stability control and automatic emergency braking without warning is a safety concern, particularly at highway speed. The fault was intermittent at first. The dealer had the vehicle five days and could not duplicate it. Within a week of getting it back the condition became nearly constant. The repair is Ford TSB 25-2568, which replaces the front axle disconnect actuator/intermediate shaft with a revised, non-disconnecting design and a new halfshaft. Ford has published this bulletin repeatedly since spring 2023 — 23-2114, then 23-2174 (July 2023), then 25-2373, then 25-2568 (January 2026) — for 2020-2021 Explorer and Aviator AWD vehicles built on or before 30-Aug-2021. Ford has redesigned the part and eliminated the disconnect feature entirely, but has issued no recall or customer satisfaction program. Because this vehicle is out of factory warranty by age at 46,821 miles, the roughly $2,500 repair fell to me. I request that NHTSA review whether a known design defect that disables stability control and pre-collision braking warrants a safety recall rather than a service bulletin.

An owner's report to NHTSA. NHTSA reads every complaint to decide what to investigate; it doesn't verify them, and a complaint is not a recall.