National Highway Traffic Safety Administration2010 Ford FusionBrakes

The ABS Hydraulic Control Unit (HCU) failed internally due to a stuck valve

ODI Happened June 24, 2026Filed June 24, 2026

In the owner's words

The ABS Hydraulic Control Unit (HCU) failed internally due to a stuck valve. The component remains on the vehicle and is available for inspection upon request. While braking normally on a public road, the vehicle hit a minor road bump, causing the ABS to momentarily engage. Immediately following the bump, the brake pedal lost all hydraulic resistance and dropped severely to the floorboard. The vehicle experienced an immediate, drastic reduction in stopping power and an extended braking distance, nearly causing a collision. This sudden loss of braking capability puts the driver, passengers, and other motorists at immediate risk of a severe accident. There were absolutely no warning lamps, error messages, or symptoms prior to hitting the road bump. The braking system functioned completely normally until the exact moment the ABS was triggered by the uneven road surface. The vehicle and its components have not been inspected by the manufacturer, police, or insurance representatives. This identical safety-compromising failure mode (loss of pedal pressure immediately following ABS activation on a bump) is a thoroughly documented defect covered by Ford under Safety Recall 19S54 and Customer Satisfaction Program 21N11. However, because this specific vehicle has a production date falling just outside of Ford's arbitrary manufacturing window (which cut off on July 15, 2009), the vehicle is barred from receiving the safety remedy. This vehicle uses the exact same layout and suffers from the exact same dangerous safety defect. The NHTSA needs to investigate and force an expansion of the vehicle build dates for this recall before this known defect causes a fatal crash.

An owner's report to NHTSA. NHTSA reads every complaint to decide what to investigate; it doesn't verify them, and a complaint is not a recall.