National Highway Traffic Safety Administration2020 Land Rover DefenderStructure › Body
On august 3rd, while driving west-southwest at approximately 80 mph on interstate 90 in montana, the a-pillar cover became loose and the small cover at the b…
ODI Happened August 3, 2020Filed August 13, 2020
In the owner's words
On august 3rd, while driving west-southwest at approximately 80 mph on interstate 90 in montana, the a-pillar cover became loose and the small cover at the base of the a pillar flew from the vehicle while moving. The two remaining pieces remained on the vehicle, one piece barely held on by a screw at the base, the other held on with about 50% of the adhesive still intact. Both would have flown off had we not immediately pulled over and removed each with the tools I had in the car (personal tools I happened to have with me). The two pieces that remained on the car were approximately 26 inches long, one 5 inches wide, the other 3 inches wide. The event startled my wife but could have really impacted a car behind us had the two pieces come off. Prior to the incident, I heard a lot of 'fluttering' noise coming from the a and / or b pillars. Being that it was a new vehicle I did not do anything about it (assumed it was part of natural road noise). I was planning addressing it with the dealer upon my return from my trip. At the time of the incident, the car had less than 3.5k miles on the odometer. I believe this could be a safety risk to the driver and other passenger cars around the vehicle if this were to happen again. It appears that the design allows air to get under the a pillar cover which creates vibration and ultimately breaks it loose from the piece underneath attached by adhesive.
An owner's report to NHTSA. NHTSA reads every complaint to decide what to investigate; it doesn't verify them, and a complaint is not a recall.